【01Studio MaixPy AI K210】20.ESP8266作接收端与服务器进行MQTT通信

目录

服务器网址：

导包：

simple库

注册引脚：

构造GPIO口的对象：

配置服务器：

例程：

例程思路

服务器网址：

MQTT Websocket Clienthttp://mqtt.p2hp.com/websocket/

导包：

import network,time
from machine import UART,Timer
from Maix import GPIO
from fpioa_manager import fm
from simple import MQTTClient

simple库

'''
构建 MQTT 客户端对象。
【client_id】: 客户端 ID，具有唯一性；
【server】: 服务器地址，可以是 IP 或者网址；
【port】:服务器端口。（默认是 1883，服务器通常采用的端口，也可以自定义。）
'''
client=mqtt. MQTTClient (client_id, server, port)

'''
连接到服务器。
'''
client.connect()

'''
发布，向服务器发送数据。
【TOPIC】：主题编号；
【message】: 信息内容，例：'Hello 01Studio!'
'''
client.publish(TOPIC,message)

'''
订阅，接收服务器发送的数据。
【TOPIC】：主题编号。
'''
client.subscribe(TOPIC)

'''
设置回调函数。
【callback】：订阅后如果接收到信息，就执行相名称的回调函数。
'''
client.set_callback(callback)

'''
检查订阅信息。如收到信息就执行设置过的回调函数 callback。
'''
client.check_msg()

注册引脚：

'''
【pin】芯片外部 IO 
【function】芯片功能
【force】=True 则强制注册，清除之前的注册记录
'''
fm.register(pin,function,force=False)

fm.register(8, fm.fpioa.GPIOHS0, force=True)
fm.register(7, fm.fpioa.UART2_TX, force=True)
fm.register(6, fm.fpioa.UART2_RX, force=True)

构造GPIO口的对象：

'''
【ID】内部 GPIO 编号
【MODE】 GPIO 模式；
	    GPIO.IN ：输入模式
	    GPIO.OUT ：输出模式
【PULL】 GPIO.PULL_UP ：上拉
		GPIO.PULL_DOWN ：下拉
		GPIO.PULL_NONE ：无
【value】GPIO 初始化电平
		1：高电平
		0：低电平
'''
GPIO(ID,MODE,PULL,VALUE)

wifi_en=GPIO(GPIO.GPIOHS0, GPIO.OUT)
uart = UART(UART.UART2,115200,timeout=1000,read_buf_len=4096)

配置服务器：

 

例程：

例程思路

'''
main.py

实验名称：MQTT通信
版本：v1.0
日期：2019.8
作者：01Studio
说明：实现MQTT通信，接收服务器发送的数据，实现订阅数据。
'''

import network,time
from machine import UART,Timer
from Maix import GPIO
from fpioa_manager import fm
from simple import MQTTClient

SSID='********' # WiFi 账号
KEY='********'  # WiFi 密码


###### WiFi模块初始化 ######
#使能引脚初始化
fm.register(8, fm.fpioa.GPIOHS0, force=True)
wifi_en=GPIO(GPIO.GPIOHS0, GPIO.OUT)

#串口初始化
fm.register(7, fm.fpioa.UART2_TX, force=True)
fm.register(6, fm.fpioa.UART2_RX, force=True)
uart = UART(UART.UART2,115200,timeout=1000,read_buf_len=4096)

#WiFi使能函数
def wifi_enable(en):
    global wifi_en
    wifi_en.value(en)

def wifi_init():
    global uart
    wifi_enable(0)
    time.sleep_ms(200)
    wifi_enable(1)
    time.sleep(2)
    uart = UART(UART.UART2,115200,timeout=1000, read_buf_len=4096)
    tmp = uart.read()
    uart.write("AT+UART_CUR=921600,8,1,0,0\r\n")
    print(uart.read())
    uart = UART(UART.UART2,921600,timeout=1000, read_buf_len=10240) # important! baudrate too low or read_buf_len too small will loose data
    uart.write("AT\r\n")
    tmp = uart.read()
    print(tmp)
    if not tmp.endswith("OK\r\n"):
        print("reset fail")
        return None
    try:
        nic = network.ESP8285(uart)
    except Exception:
        return None
    return nic

############################
#########  主程序  ##########
############################

#构建WiFi对象并使能
wlan = wifi_init()

#正在连接印提示
print("Trying to connect... (may take a while)...")

#连接网络
wlan.connect(SSID,KEY)

#打印IP相关信息
print(wlan.ifconfig())

#设置MQTT回调函数,有信息时候执行
def MQTT_callback(topic, msg):
    print('topic: {}'.format(topic))
    print('msg: {}'.format(msg))
    s=msg.decode('utf-8')#utf-8解码，以正确显示中文
    print(s)
    #client.publish(TOPIC, s)

#接收数据任务
def MQTT_Rev(tim):
    try:
        client.check_msg()
    except OSError:
        pass


SERVER = 'mqtt.p2hp.com'
PORT = 1883
CLIENT_ID = '01Studio-ESP32' # 客户端ID
TOPIC = '/public/01Studio/1' # TOPIC名称

client = MQTTClient(CLIENT_ID, SERVER, PORT) #建立客户端对象
client.set_callback(MQTT_callback)  #配置回调函数
client.connect()
print("a")
client.subscribe(TOPIC) #订阅主题
print("b")

#定时器0初始化，周期300ms，执行MQTT通信接收任务
tim = Timer(Timer.TIMER0, Timer.CHANNEL0, mode=Timer.MODE_PERIODIC,period=300, callback=MQTT_Rev)

while True:
    pass

 

'''
simple.py

需要提前将此文件发送到开发板
'''
import usocket as socket
import ustruct as struct
from ubinascii import hexlify

class MQTTException(Exception):
    pass

class MQTTClient:

    def __init__(self, client_id, server, port=0, user=None, password=None, keepalive=0,
                 ssl=False, ssl_params={}):
        if port == 0:
            port = 8883 if ssl else 1883
        self.client_id = client_id
        self.sock = None
        self.server = server
        self.port = port
        self.ssl = ssl
        self.ssl_params = ssl_params
        self.pid = 0
        self.cb = None
        self.user = user
        self.pswd = password
        self.keepalive = keepalive
        self.lw_topic = None
        self.lw_msg = None
        self.lw_qos = 0
        self.lw_retain = False

    def _send_str(self, s):
        self.sock.write(struct.pack("!H", len(s)))
        self.sock.write(s)

    def _recv_len(self):
        n = 0
        sh = 0
        while 1:
            b = self.sock.read(1)[0]
            n |= (b & 0x7f) << sh
            if not b & 0x80:
                return n
            sh += 7

    def set_callback(self, f):
        self.cb = f

    def set_last_will(self, topic, msg, retain=False, qos=0):
        assert 0 <= qos <= 2
        assert topic
        self.lw_topic = topic
        self.lw_msg = msg
        self.lw_qos = qos
        self.lw_retain = retain

    def connect(self, clean_session=True):
        self.sock = socket.socket()
        addr = socket.getaddrinfo(self.server, self.port)[0][-1]
        self.sock.connect(addr)
        if self.ssl:
            import ussl
            self.sock = ussl.wrap_socket(self.sock, **self.ssl_params)
        premsg = bytearray(b"\x10\0\0\0\0\0")
        msg = bytearray(b"\x04MQTT\x04\x02\0\0")

        sz = 10 + 2 + len(self.client_id)
        msg[6] = clean_session << 1
        if self.user is not None:
            sz += 2 + len(self.user) + 2 + len(self.pswd)
            msg[6] |= 0xC0
        if self.keepalive:
            assert self.keepalive < 65536
            msg[7] |= self.keepalive >> 8
            msg[8] |= self.keepalive & 0x00FF
        if self.lw_topic:
            sz += 2 + len(self.lw_topic) + 2 + len(self.lw_msg)
            msg[6] |= 0x4 | (self.lw_qos & 0x1) << 3 | (self.lw_qos & 0x2) << 3
            msg[6] |= self.lw_retain << 5

        i = 1
        while sz > 0x7f:
            premsg[i] = (sz & 0x7f) | 0x80
            sz >>= 7
            i += 1
        premsg[i] = sz

        self.sock.write(premsg, i + 2)
        self.sock.write(msg)
        #print(hex(len(msg)), hexlify(msg, ":"))
        self._send_str(self.client_id)
        if self.lw_topic:
            self._send_str(self.lw_topic)
            self._send_str(self.lw_msg)
        if self.user is not None:
            self._send_str(self.user)
            self._send_str(self.pswd)
        resp = self.sock.read(4)
        assert resp[0] == 0x20 and resp[1] == 0x02
        if resp[3] != 0:
            raise MQTTException(resp[3])
        return resp[2] & 1

    def disconnect(self):
        self.sock.write(b"\xe0\0")
        self.sock.close()

    def ping(self):
        self.sock.write(b"\xc0\0")

    def publish(self, topic, msg, retain=False, qos=0):
        pkt = bytearray(b"\x30\0\0\0")
        pkt[0] |= qos << 1 | retain
        sz = 2 + len(topic) + len(msg)
        if qos > 0:
            sz += 2
        assert sz < 2097152
        i = 1
        while sz > 0x7f:
            pkt[i] = (sz & 0x7f) | 0x80
            sz >>= 7
            i += 1
        pkt[i] = sz
        #print(hex(len(pkt)), hexlify(pkt, ":"))
        self.sock.write(pkt, i + 1)
        self._send_str(topic)
        if qos > 0:
            self.pid += 1
            pid = self.pid
            struct.pack_into("!H", pkt, 0, pid)
            self.sock.write(pkt, 2)
        self.sock.write(msg)
        if qos == 1:
            while 1:
                op = self.wait_msg()
                if op == 0x40:
                    sz = self.sock.read(1)
                    assert sz == b"\x02"
                    rcv_pid = self.sock.read(2)
                    rcv_pid = rcv_pid[0] << 8 | rcv_pid[1]
                    if pid == rcv_pid:
                        return
        elif qos == 2:
            assert 0

    def subscribe(self, topic, qos=0):
        assert self.cb is not None, "Subscribe callback is not set"
        pkt = bytearray(b"\x82\0\0\0")
        self.pid += 1
        struct.pack_into("!BH", pkt, 1, 2 + 2 + len(topic) + 1, self.pid)
        #print(hex(len(pkt)), hexlify(pkt, ":"))
        self.sock.write(pkt)
        self._send_str(topic)
        self.sock.write(qos.to_bytes(1, "little"))
        while 1:
            op = self.wait_msg()
            if op == 0x90:
                resp = self.sock.read(4)
                #print(resp)
                assert resp[1] == pkt[2] and resp[2] == pkt[3]
                if resp[3] == 0x80:
                    raise MQTTException(resp[3])
                return

    # Wait for a single incoming MQTT message and process it.
    # Subscribed messages are delivered to a callback previously
    # set by .set_callback() method. Other (internal) MQTT
    # messages processed internally.
    def wait_msg(self):
        res = self.sock.read(1)
        self.sock.setblocking(True)
        if res is None:
            return None
        if res == b"":
            raise OSError(-1)
        if res == b"\xd0":  # PINGRESP
            sz = self.sock.read(1)[0]
            assert sz == 0
            return None
        op = res[0]
        if op & 0xf0 != 0x30:
            return op
        sz = self._recv_len()
        topic_len = self.sock.read(2)
        topic_len = (topic_len[0] << 8) | topic_len[1]
        topic = self.sock.read(topic_len)
        sz -= topic_len + 2
        if op & 6:
            pid = self.sock.read(2)
            pid = pid[0] << 8 | pid[1]
            sz -= 2
        msg = self.sock.read(sz)
        self.cb(topic, msg)
        if op & 6 == 2:
            pkt = bytearray(b"\x40\x02\0\0")
            struct.pack_into("!H", pkt, 2, pid)
            self.sock.write(pkt)
        elif op & 6 == 4:
            assert 0

    # Checks whether a pending message from server is available.
    # If not, returns immediately with None. Otherwise, does
    # the same processing as wait_msg.
    def check_msg(self):
        self.sock.setblocking(False)
        return self.wait_msg()