一个如何在bash中使用getopts的例子

本文翻译自：An example of how to use getopts in bash

I want to call myscript file in this way: 我想以这种方式调用myscript文件：

$ ./myscript -s 45 -p any_string

or 要么

$ ./myscript -h >>> should display help
$ ./myscript    >>> should display help

My requirements are: 我的要求是：

• getopt here to get the input arguments getopt这里获取输入参数
• check that -s exists, if not return error 检查-s存在，如果没有返回错误
• check that the value after the -s is 45 or 90 检查-s之后的值是45还是90
• check that the -p exists and there is an input string after 检查-p存在，之后是否有输入字符串
• if the user enters ./myscript -h or just ./myscript then display help 如果用户输入./myscript -h或只是./myscript则显示帮助

I tried so far this code: 我到目前为止尝试了这段代码：

#!/bin/bash
while getopts "h:s:" arg; do
  case $arg in
    h)
      echo "usage" 
      ;;
    s)
      strength=$OPTARG
      echo $strength
      ;;
  esac
done

But with that code I get errors. 但是使用该代码我会收到错误。 How to do it with Bash and getopt ? 如何用Bash和getopt做到这一点？

---

#1楼

参考：https://stackoom.com/question/17A0l/一个如何在bash中使用getopts的例子

---

#2楼

The example packaged with getopt (my distro put it in /usr/share/getopt/getopt-parse.bash ) looks like it covers all of your cases: 与getopt一起打包的示例（我的发行版将它放在/usr/share/getopt/getopt-parse.bash ）看起来像是涵盖了所有情况：

#!/bin/bash

# A small example program for using the new getopt(1) program.
# This program will only work with bash(1)
# An similar program using the tcsh(1) script language can be found
# as parse.tcsh

# Example input and output (from the bash prompt):
# ./parse.bash -a par1 'another arg' --c-long 'wow!*\?' -cmore -b " very long "
# Option a
# Option c, no argument
# Option c, argument `more'
# Option b, argument ` very long '
# Remaining arguments:
# --> `par1'
# --> `another arg'
# --> `wow!*\?'

# Note that we use `"$@"' to let each command-line parameter expand to a 
# separate word. The quotes around `$@' are essential!
# We need TEMP as the `eval set --' would nuke the return value of getopt.
TEMP=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \
     -n 'example.bash' -- "$@"`

if [ $? != 0 ] ; then echo "Terminating..." >&2 ; exit 1 ; fi

# Note the quotes around `$TEMP': they are essential!
eval set -- "$TEMP"

while true ; do
    case "$1" in
        -a|--a-long) echo "Option a" ; shift ;;
        -b|--b-long) echo "Option b, argument \`$2'" ; shift 2 ;;
        -c|--c-long) 
            # c has an optional argument. As we are in quoted mode,
            # an empty parameter will be generated if its optional
            # argument is not found.
            case "$2" in
                "") echo "Option c, no argument"; shift 2 ;;
                *)  echo "Option c, argument \`$2'" ; shift 2 ;;
            esac ;;
        --) shift ; break ;;
        *) echo "Internal error!" ; exit 1 ;;
    esac
done
echo "Remaining arguments:"
for arg do echo '--> '"\`$arg'" ; done

---

#3楼

#!/bin/bash

usage() { echo "Usage: $0 [-s <45|90>] [-p <string>]" 1>&2; exit 1; }

while getopts ":s:p:" o; do
    case "${o}" in
        s)
            s=${OPTARG}
            ((s == 45 || s == 90)) || usage
            ;;
        p)
            p=${OPTARG}
            ;;
        *)
            usage
            ;;
    esac
done
shift $((OPTIND-1))

if [ -z "${s}" ] || [ -z "${p}" ]; then
    usage
fi

echo "s = ${s}"
echo "p = ${p}"

Example runs: 示例运行：

$ ./myscript.sh
Usage: ./myscript.sh [-s <45|90>] [-p <string>]

$ ./myscript.sh -h
Usage: ./myscript.sh [-s <45|90>] [-p <string>]

$ ./myscript.sh -s "" -p ""
Usage: ./myscript.sh [-s <45|90>] [-p <string>]

$ ./myscript.sh -s 10 -p foo
Usage: ./myscript.sh [-s <45|90>] [-p <string>]

$ ./myscript.sh -s 45 -p foo
s = 45
p = foo

$ ./myscript.sh -s 90 -p bar
s = 90
p = bar

---

#4楼

I know that this is already answered, but for the record and for anyone with the same requeriments as me I decided to post this related answer. 我知道这已经得到了回答，但是对于记录和任何与我有同样要求的人我决定发布这个相关的答案。 The code is flooded with comments to explain the code. 代码充斥着注释来解释代码。

Updated answer: 更新的答案：

Save the file as getopt.sh : 将文件另存为getopt.sh ：

#!/bin/bash

function get_variable_name_for_option {
    local OPT_DESC=${1}
    local OPTION=${2}
    local VAR=$(echo ${OPT_DESC} | sed -e "s/.*\[\?-${OPTION} \([A-Z_]\+\).*/\1/g" -e "s/.*\[\?-\(${OPTION}\).*/\1FLAG/g")

    if [[ "${VAR}" == "${1}" ]]; then
        echo ""
    else
        echo ${VAR}
    fi
}

function parse_options {
    local OPT_DESC=${1}
    local INPUT=$(get_input_for_getopts "${OPT_DESC}")

    shift
    while getopts ${INPUT} OPTION ${@};
    do
        [ ${OPTION} == "?" ] && usage
        VARNAME=$(get_variable_name_for_option "${OPT_DESC}" "${OPTION}")
            [ "${VARNAME}" != "" ] && eval "${VARNAME}=${OPTARG:-true}" # && printf "\t%s\n" "* Declaring ${VARNAME}=${!VARNAME} -- OPTIONS='$OPTION'"
    done

    check_for_required "${OPT_DESC}"

}

function check_for_required {
    local OPT_DESC=${1}
    local REQUIRED=$(get_required "${OPT_DESC}" | sed -e "s/\://g")
    while test -n "${REQUIRED}"; do
        OPTION=${REQUIRED:0:1}
        VARNAME=$(get_variable_name_for_option "${OPT_DESC}" "${OPTION}")
                [ -z "${!VARNAME}" ] && printf "ERROR: %s\n" "Option -${OPTION} must been set." && usage
        REQUIRED=${REQUIRED:1}
    done
}

function get_input_for_getopts {
    local OPT_DESC=${1}
    echo ${OPT_DESC} | sed -e "s/\([a-zA-Z]\) [A-Z_]\+/\1:/g" -e "s/[][ -]//g"
}

function get_optional {
    local OPT_DESC=${1}
    echo ${OPT_DESC} | sed -e "s/[^[]*\(\[[^]]*\]\)[^[]*/\1/g" -e "s/\([a-zA-Z]\) [A-Z_]\+/\1:/g" -e "s/[][ -]//g"
}

function get_required {
    local OPT_DESC=${1}
    echo ${OPT_DESC} | sed -e "s/\([a-zA-Z]\) [A-Z_]\+/\1:/g" -e "s/\[[^[]*\]//g" -e "s/[][ -]//g"
}

function usage {
    printf "Usage:\n\t%s\n" "${0} ${OPT_DESC}"
    exit 10
}

Then you can use it like this: 然后你可以像这样使用它：

#!/bin/bash
#
# [ and ] defines optional arguments
#

# location to getopts.sh file
source ./getopt.sh
USAGE="-u USER -d DATABASE -p PASS -s SID [ -a START_DATE_TIME ]"
parse_options "${USAGE}" ${@}

echo ${USER}
echo ${START_DATE_TIME}

Old answer: 老答案：

I recently needed to use a generic approach. 我最近需要使用通用方法。 I came across with this solution: 我遇到了这个解决方案：

#!/bin/bash
# Option Description:
# -------------------
#
# Option description is based on getopts bash builtin. The description adds a variable name feature to be used
# on future checks for required or optional values.
# The option description adds "=>VARIABLE_NAME" string. Variable name should be UPPERCASE. Valid characters
# are [A-Z_]*.
#
# A option description example:
#   OPT_DESC="a:=>A_VARIABLE|b:=>B_VARIABLE|c=>C_VARIABLE"
#
# -a option will require a value (the colon means that) and should be saved in variable A_VARIABLE.
# "|" is used to separate options description.
# -b option rule applies the same as -a.
# -c option doesn't require a value (the colon absense means that) and its existence should be set in C_VARIABLE
#
#   ~$ echo get_options ${OPT_DESC}
#   a:b:c
#   ~$
#


# Required options 
REQUIRED_DESC="a:=>REQ_A_VAR_VALUE|B:=>REQ_B_VAR_VALUE|c=>REQ_C_VAR_FLAG"

# Optional options (duh)
OPTIONAL_DESC="P:=>OPT_P_VAR_VALUE|r=>OPT_R_VAR_FLAG"

function usage {
    IFS="|"
    printf "%s" ${0}
    for i in ${REQUIRED_DESC};
    do
        VARNAME=$(echo $i | sed -e "s/.*=>//g")
    printf " %s" "-${i:0:1} $VARNAME"
    done

    for i in ${OPTIONAL_DESC};
    do
        VARNAME=$(echo $i | sed -e "s/.*=>//g")
        printf " %s" "[-${i:0:1} $VARNAME]"
    done
    printf "\n"
    unset IFS
    exit
}

# Auxiliary function that returns options characters to be passed
# into 'getopts' from a option description.
# Arguments:
#   $1: The options description (SEE TOP)
#
# Example:
#   OPT_DESC="h:=>H_VAR|f:=>F_VAR|P=>P_VAR|W=>W_VAR"
#   OPTIONS=$(get_options ${OPT_DESC})
#   echo "${OPTIONS}"
#
# Output:
#   "h:f:PW"
function get_options {
    echo ${1} | sed -e "s/\([a-zA-Z]\:\?\)=>[A-Z_]*|\?/\1/g"
}

# Auxiliary function that returns all variable names separated by '|'
# Arguments:
#       $1: The options description (SEE TOP)
#
# Example:
#       OPT_DESC="h:=>H_VAR|f:=>F_VAR|P=>P_VAR|W=>W_VAR"
#       VARNAMES=$(get_values ${OPT_DESC})
#       echo "${VARNAMES}"
#
# Output:
#       "H_VAR|F_VAR|P_VAR|W_VAR"
function get_variables {
    echo ${1} | sed -e "s/[a-zA-Z]\:\?=>\([^|]*\)/\1/g"
}

# Auxiliary function that returns the variable name based on the
# option passed by.
# Arguments:
#   $1: The options description (SEE TOP)
#   $2: The option which the variable name wants to be retrieved
#
# Example:
#   OPT_DESC="h:=>H_VAR|f:=>F_VAR|P=>P_VAR|W=>W_VAR"
#   H_VAR=$(get_variable_name ${OPT_DESC} "h")
#   echo "${H_VAR}"
#
# Output:
#   "H_VAR"
function get_variable_name {
    VAR=$(echo ${1} | sed -e "s/.*${2}\:\?=>\([^|]*\).*/\1/g")
    if [[ ${VAR} == ${1} ]]; then
        echo ""
    else
        echo ${VAR}
    fi
}

# Gets the required options from the required description
REQUIRED=$(get_options ${REQUIRED_DESC})

# Gets the optional options (duh) from the optional description
OPTIONAL=$(get_options ${OPTIONAL_DESC})

# or... $(get_options "${OPTIONAL_DESC}|${REQUIRED_DESC}")

# The colon at starts instructs getopts to remain silent
while getopts ":${REQUIRED}${OPTIONAL}" OPTION
do
    [[ ${OPTION} == ":" ]] && usage
    VAR=$(get_variable_name "${REQUIRED_DESC}|${OPTIONAL_DESC}" ${OPTION})
    [[ -n ${VAR} ]] && eval "$VAR=${OPTARG}"
done

shift $(($OPTIND - 1))

# Checks for required options. Report an error and exits if
# required options are missing.

# Using function version ...
VARS=$(get_variables ${REQUIRED_DESC})
IFS="|"
for VARNAME in $VARS;
do
    [[ -v ${VARNAME} ]] || usage
done
unset IFS

# ... or using IFS Version (no function)
OLDIFS=${IFS}
IFS="|"
for i in ${REQUIRED_DESC};
do
    VARNAME=$(echo $i | sed -e "s/.*=>//g")
    [[ -v ${VARNAME} ]] || usage
    printf "%s %s %s\n" "-${i:0:1}" "${!VARNAME:=present}" "${VARNAME}"
done
IFS=${OLDIFS}

I didn't test this roughly, so I could have some bugs in there. 我没有粗略测试，所以我可能会有一些错误。

---

#5楼

The problem with the original code is that: 原始代码的问题是：

• h: expects parameter where it shouldn't, so change it into just h (without colon) h:期望参数不应该，所以将其改为h （不带冒号）
• to expect -p any_string , you need to add p: to the argument list 期望-p any_string ，你需要将p:添加到参数列表中

---

The basic syntax of getopts is (see: man bash ): getopts的基本语法是（参见： man bash ）：

getopts OPTSTRING VARNAME [ARGS...]

where: 哪里：

• OPTSTRING is string with list of expected arguments, OPTSTRING是带有预期参数列表的字符串，

  • h - check for option -h without parameters; h - 检查选项-h 不带参数; gives error on unsupported options; 在不支持的选项上给出错误;
  • h: - check for option -h with parameter; h: - 用参数检查选项-h ; gives errors on unsupported options; 在不支持的选项上出错;
  • abc - check for options -a , -b , -c ; abc - 检查选项-a ， -b ， -c ; gives errors on unsupported options; 给出了支持的选项错误;

  • :abc - check for options -a , -b , -c ; :abc - 检查选项-a ， -b ， -c ; silences errors on unsupported options; 在不支持的选项上沉默错误;

    ^{Notes: In other words, colon in front of options allows you handle the errors in your code. 注意：换句话说，选项前面的冒号允许您处理代码中的错误。 Variable will contain ? 变量将包含? in the case of unsupported option, : in the case of missing value. 在不支持的选项的情况下， :在缺少值的情况下。}

• OPTARG - is set to current argument value, OPTARG - 设置为当前参数值，

• OPTERR - indicates if Bash should display error messages. OPTERR - 指示Bash是否应显示错误消息。

So the code can be: 所以代码可以是：

#!/usr/bin/env bash
usage() { echo "$0 usage:" && grep " .)\ #" $0; exit 0; }
[ $# -eq 0 ] && usage
while getopts ":hs:p:" arg; do
  case $arg in
    p) # Specify p value.
      echo "p is ${OPTARG}"
      ;;
    s) # Specify strength, either 45 or 90.
      strength=${OPTARG}
      [ $strength -eq 45 -o $strength -eq 90 ] \
        && echo "Strength is $strength." \
        || echo "Strength needs to be either 45 or 90, $strength found instead."
      ;;
    h | *) # Display help.
      usage
      exit 0
      ;;
  esac
done

Example usage: 用法示例：

$ ./foo.sh 
./foo.sh usage:
    p) # Specify p value.
    s) # Specify strength, either 45 or 90.
    h | *) # Display help.
$ ./foo.sh -s 123 -p any_string
Strength needs to be either 45 or 90, 123 found instead.
p is any_string
$ ./foo.sh -s 90 -p any_string
Strength is 90.
p is any_string

See: Small getopts tutorial at Bash Hackers Wiki 请参阅：Bash Hackers Wiki上的Small getopts教程

---

#6楼

POSIX 7 example POSIX 7示例

It is also worth checking the example from the standard: http://pubs.opengroup.org/onlinepubs/9699919799/utilities/getopts.html 还值得查看标准中的示例： http ： //pubs.opengroup.org/onlinepubs/9699919799/utilities/getopts.html

aflag=
bflag=
while getopts ab: name
do
    case $name in
    a)    aflag=1;;
    b)    bflag=1
          bval="$OPTARG";;
    ?)   printf "Usage: %s: [-a] [-b value] args\n" $0
          exit 2;;
    esac
done
if [ ! -z "$aflag" ]; then
    printf "Option -a specified\n"
fi
if [ ! -z "$bflag" ]; then
    printf 'Option -b "%s" specified\n' "$bval"
fi
shift $(($OPTIND - 1))
printf "Remaining arguments are: %s\n" "$*"

And then we can try it out: 然后我们可以尝试一下：

$ sh a.sh
Remaining arguments are: 
$ sh a.sh -a
Option -a specified
Remaining arguments are: 
$ sh a.sh -b
No arg for -b option
Usage: a.sh: [-a] [-b value] args
$ sh a.sh -b myval
Option -b "myval" specified
Remaining arguments are: 
$ sh a.sh -a -b myval
Option -a specified
Option -b "myval" specified
Remaining arguments are: 
$ sh a.sh remain
Remaining arguments are: remain
$ sh a.sh -- -a remain
Remaining arguments are: -a remain

Tested in Ubuntu 17.10, sh is dash 0.5.8. 在Ubuntu 17.10中测试， sh是破折号0.5.8。