华为eNSP——DHCP中继配置

实验拓扑图

实验环境

R4作为DHCP服务器，R1，R2上做中继服务，实现不同网段的pc获取地址

1，配置sw交换机

<Huawei>sys      ##进入系统视图模式
[Huawei]sysname SW1   ##修改名字
[SW1]vlan bat 10 20      ##创建vlan10 20
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW1]int e0/0/1     ##进接口
[SW1-Ethernet0/0/1]port link-type access    ##配置为access口
[SW1-Ethernet0/0/1]port default vlan 10      ##将接口放到vlan10中
[SW1-Ethernet0/0/1]un sh                           ##开启
[SW1-Ethernet0/0/1]int e0/0/2                     ##e0/0/2接口
[SW1-Ethernet0/0/2]port link-type access    
[SW1-Ethernet0/0/2]port default vlan 20     ##放到vlan20中
[SW1-Ethernet0/0/2]un sh
[SW1-Ethernet0/0/2]int e0/0/3    
[SW1-Ethernet0/0/3]port link-type access 
[SW1-Ethernet0/0/3]port default vlan 10    
[SW1-Ethernet0/0/3]un sh
[SW1-Ethernet0/0/3]int e0/0/4
[SW1-Ethernet0/0/4]port link-type access
[SW1-Ethernet0/0/4]port default vlan 20
[SW1-Ethernet0/0/4]un sh
[SW1-Ethernet0/0/4]dis vlan    ##查看vlan信息
The total number of vlans is : 3
--------------------------------------------------------------------------------
U: Up;         D: Down;         TG: Tagged;         UT: Untagged;
MP: Vlan-mapping;               ST: Vlan-stacking;
#: ProtocolTransparent-vlan;    *: Management-vlan;
--------------------------------------------------------------------------------
VID  Type    Ports