华为设备如何将接口配置为中继模式_华为eNSP——DHCP中继配置

实验拓扑图

实验环境

R4作为DHCP服务器，R1，R2上做中继服务，实现不同网段的pc获取地址

1，配置sw交换机

sys ##进入系统视图模式

[Huawei]sysname SW1 ##修改名字

[SW1]vlan bat 10 20 ##创建vlan10 20

Info: This operation may take a few seconds. Please wait for a moment...done.

[SW1]int e0/0/1 ##进接口

[SW1-Ethernet0/0/1]port link-type access ##配置为access口

[SW1-Ethernet0/0/1]port default vlan 10 ##将接口放到vlan10中

[SW1-Ethernet0/0/1]un sh ##开启

[SW1-Ethernet0/0/1]int e0/0/2 ##e0/0/2接口

[SW1-Ethernet0/0/2]port link-type access

[SW1-Ethernet0/0/2]port default vlan 20 ##放到vlan20中

[SW1-Ethernet0/0/2]un sh

[SW1-Ethernet0/0/2]int e0/0/3

[SW1-Ethernet0/0/3]port link-type access

[SW1-Ethernet0/0/3]port default vlan 10

[SW1-Ethernet0/0/3]un sh

[SW1-Ethernet0/0/3]int e0/0/4

[SW1-Ethernet0/0/4]port link-type access

[SW1-Ethernet0/0/4]port default vlan 20

[SW1-Ethernet0/0/4]un sh

[SW1-Ethernet0/0/4]dis vlan ##查看vlan信息

The total number of vlans is : 3

--------------------------------------------------------------------------------

U: Up; D: Down; TG: Tagged; UT: Untagged;

MP: Vlan-mapping; ST: Vlan-stacking;

#: ProtocolTransparent-vlan; *: Management-vlan;

--------------------------------------------------------------------