第8-9周作业--STM32嵌入式应用系统设计

vscode代码调试

• 在虚拟机上安装vscode
  
• 安装完成后将c/c++的插件安装完成
  
• 新建一个文件rever.c
  
• 写入以下代码

#include<stdio.h>
void ShowRevertNum(int iNum)
{
while(iNum>10)
{
printf("%d",iNum%10);
iNum=iNum/10;
}
}int main(void)
{
int iNum;
printf("please input a number: ");
scanf("%d",&iNum);
printf("After revert:");
ShowRevertNum(iNum);
}

• 编译
  
• 运行后在将launch.json和tasks.json修改为以下代码
  tasks.json

{
    // See https://go.microsoft.com/fwlink/?LinkId=733558
    // for the documentation about the tasks.json format
    "version": "2.0.0",
    "tasks": [
        {
            "label": "build",
            "type": "shell",
            "command": "g++",
            "args": [
                "-g",
                "${file}",
                "-std=c++11",
                "-o",
                "${fileBasenameNoExtension}.out"
            ],
            "problemMatcher": [
                "$gcc"
            ]
        }
    ]
}

launch.json

{
    // Use IntelliSense to learn about possible attributes.
    // Hover to view descriptions of existing attributes.
    // For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
    "version": "0.2.0",
    "configurations": [
        {
            "name": "(gdb) Launch",
            "type": "cppdbg",
            "request": "launch",
            "program": "${workspaceFolder}/${fileBasenameNoExtension}.out",
            "args": [],
            "stopAtEntry": false,
            "cwd": "${workspaceFolder}",
            "environment": [],
            "externalConsole": true,
            "MIMode": "gdb",
            "preLaunchTask": "build",
            "setupCommands": [
                {
                    "description": "Enable pretty-printing for gdb",
                    "text": "-enable-pretty-printing",
                    "ignoreFailures": true
                }
            ]
        }
    ]
}

• 运行

• 结果
  

Proteus仿真运行stm32程序

• 创建一个新的工程文件
  - 电路仿真图
  
• 打开keil新建一个工程
  写入以下代码

#include "stm32f10x.h"

GPIO_InitTypeDef GPIO_InitStructure;
void delay_ms(uint32_t ms)
{
	uint32_t i_cnt,j_cnt;
	for(i_cnt=0;i_cnt<3000;i_cnt++);
	for(j_cnt=0;j_cnt<ms;j_cnt++);
	
}
uint32_t i;
int main(void)
{
  
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);

	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7;
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
	GPIO_Init(GPIOC, &GPIO_InitStructure);

	GPIOC->BSRR=0xff;
	while (1)
	{
	  for(i=0;i<8;i++)
	  {
		delay_ms(99000);
		GPIOC->BRR=(1<<i);  
		  
		delay_ms(99000);
		GPIOC->BSRR=(1<<i);
	  }
	  for(i=0;i<8;i++)
	  {
		  delay_ms(99000);
		  GPIOC->BRR=0x000000ff;
		  
		  delay_ms(99000);
		  GPIOC->BSRR=0x000000ff;
		  
	  }

	}
}

• 选择生成hex文件

• 双击芯片，修改其晶振为8M，导入 .hex文件
  
• 结果