第一次作业

配置缺省：

[r1]ip route-static 0.0.0.0 0 15.0.0.2

[r2]ip route-static 0.0.0.0 0 25.0.0.2

[r3]ip route-static 0.0.0.0 0 35.0.0.2

[R4]ip route-static 0.0.0.0 0 45.0.0.2

R1和R5间使用PPP的PAP认证，R5为主认证方

[ISP]aaa
[ISP-aaa]local-user huawei password cipher 123456
[ISP-aaa]local-user huawei service-type ppp
[ISP-aaa]q
[ISP]int s 3/0/0
[ISP-Serial3/0/0]ppp authentication-mode pap

[r1]int s 4/0/0
[r1-Serial4/0/0]ppp pap local-user huawei password cipher 123456
 

 R2与R5之间使用PPP的chap认证，R5为主认证方

[ISP]int s 3/0/1
[ISP-Serial3/0/1]ppp authentication-mode chap

[r2]int s 4/0/0   
[r2-Serial4/0/0]ppp chap user huawei  
[r2-Serial4/0/0]ppp chap password cipher 123456

R3与R5之间使用HDLC封装

[ISP]int s 4/0/0
[ISP-Serial4/0/0]link-protocol hdlc

[r3]int s 4/0/0 
[r3-Serial4/0/0]link-protocol hdlc

R1/R2/R3构建一个MGRE环境，R1为中心站点

[r1]int t 0/0/0
[r1-Tunnel0/0/0]ip ad 192.168.5.1 24
[r1-Tunnel0/0/0]tunnel-protocol gre p2mp    
[r1-Tunnel0/0/0]source 15.0.0.1

[r1-Tunnel0/0/0]nhrp network-id 50

[r2]int t 0/0/0
[r2-Tunnel0/0/0]ip ad 192.168.5.2 24 
[r2-Tunnel0/0/0]tunnel-protocol gre p2mp 
[r2-Tunnel0/0/0]source 25.0.0.1
[r2-Tunnel0/0/0]nhrp network-id 50
[r2-Tunnel0/0/0]nhrp entry 192.168.5.1 15.0.01 register

[r3]int t 0/0/0
[r3-Tunnel0/0/0]ip ad 192.168.5.3 24
[r3-Tunnel0/0/0]tunnel-protocol gre p2mp  
[r3-Tunnel0/0/0]source 35.0.0.1
[r3-Tunnel0/0/0]nhrp network-id 50
[r3-Tunnel0/0/0]nhrp entry 192.168.5.1 15.0.0.1 register

R1、R4间为点到点的GRE

[r1]int t 0/0/1
[r1-Tunnel0/0/1]ip ad 192.168.6.1 24  
[r1-Tunnel0/0/1]tunnel-protocol gre 
[r1-Tunnel0/0/1]source 15.0.0.1
[r1-Tunnel0/0/1]destination 45.0.0.1

[R4]int t 0/0/1
[R4-Tunnel0/0/1]ip ad 192.168.6.2 24
[R4-Tunnel0/0/1]tunnel-protocol gre
[R4-Tunnel0/0/1]source 45.0.0.1
[R4-Tunnel0/0/1]destination 15.0.0.1

整个私有网络基于RIP全网可达

[r1]int t 0/0/0
[r1-Tunnel0/0/0]nhrp entry multicast dynamic  
[r1-Tunnel0/0/0]undo rip split-horizon 

[r1-Tunnel0/0/0]q

[r1]rip
[r1-rip-1]version 2
[r1-rip-1]network 192.168.1.0
[r1-rip-1]network 192.168.5.0
[r1-rip-1]network 192.168.6.0

[r2]rip
[r2-rip-1]version 2
[r2-rip-1]network 192.168.2.0
[r2-rip-1]network 192.168.5.0

[r3]rip
[r3-rip-1]version 2
[r3-rip-1]network 192.168.3.0
[r3-rip-1]network 192.168.5.0

[R4]rip
[R4-rip-1]version 2
[R4-rip-1]network 192.168.4.0
[R4-rip-1]network 192.168.6.0

所有PC设置私有IP为源IP，可以访问R5环回

[r1]acl 2000
[r1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[r1-acl-basic-2000]q
[r1]int s 4/0/0  
[r1-Serial4/0/0]nat outbound 2000

[r2]acl 2000
[r2-acl-basic-2000]rule permit source 192.168.2.0 0.0.0.255
[r2-acl-basic-2000]q
[r2]int s 4/0/0
[r2-Serial4/0/0]nat outbound 2000

[r3]acl 2000
[r3-acl-basic-2000]rule permit source 192.168.3.0 0.0.0.255
[r3-acl-basic-2000]q
[r3]int s 4/0/0
[r3-Serial4/0/0]nat outbound 2000

[R4]acl 2000
[R4-acl-basic-2000]rule permit source 192.168.4.0 0.0.0.255
[R4-acl-basic-2000]q
[R4]int g 0/0/1 
[R4-GigabitEthernet0/0/1]nat outbound 2000