文章目录
LVS-DR实战：搭建HTTP和HTTPS负载均衡集群
1.环境说明：
| 所需设备 | IP地址 | VIP |
|---|---|---|
| LVS服务器（DR） | DIP：192.168.159.135 | VIP：192.168.159.250 |
| apache服务器（RS1） | IP：192.168.159.132 | VIP：192.168.159.250 |
| apache服务器（RS2） | IP：192.168.159.136 | VIP：192.168.159.250 |
| 客户端（longnian） | IP：192.168.159.137 | 无 |
2.搭建DR模式的HTTP负载集群
2.1在客户端上配置CIP
[root@longnian ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno16777736: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:b2:1a:0e brd ff:ff:ff:ff:ff:ff
inet 192.168.159.137/24 brd 192.168.159.255 scope global dynamic eno16777736
valid_lft 1567sec preferred_lft 1567sec
inet6 fe80::20c:29ff:feb2:1a0e/64 scope link
valid_lft forever preferred_lft forever
2.2在DR上配置DIP和VIP
[root@DR ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 192.168.159.250/32 scope global lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:be:2f:65 brd ff:ff:ff:ff:ff:ff
inet 192.168.159.135/24 brd 192.168.159.255 scope global dynamic ens33
valid_lft 1103sec preferred_lft 1103sec
inet6 fe80::20c:29ff:febe:2f65/64 scope link
valid_lft forever preferred_lft forever
2.3在RS上修改网卡内核参数
[root@RS1 ~]# vim /etc/sysctl.conf
//添加下面两行内容
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2
[root@RS1 ~]# sysctl -p
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2
[root@RS2 ~]# vim /etc/sysctl.conf
//添加下面两行内容
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2
[root@RS2 ~]# sysctl -p
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2
2.4在RS上配置VIP和RIP
[root@RS1 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 192.168.159.250/32 scope global lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno16777736: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:4a:7e:86 brd ff:ff:ff:ff:ff:ff
inet 192.168.159.132/24 brd 192.168.159.255 scope global dynamic eno16777736
valid_lft 1503sec preferred_lft 1503sec
inet6 fe80::20c:29ff:fe4a:7e86/64 scope link
valid_lft forever preferred_lft forever
[root@RS2 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 192.168.159.250/32 scope global lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno16777736: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:2e:bc:ec brd ff:ff:ff:ff:ff:ff
inet 192.168.159.136/24 brd 192.168.159.255 scope global dynamic eno16777736
valid_lft 1418sec preferred_lft 1418sec
inet6 fe80::20c:29ff:fe2e:bcec/64 scope link
valid_lft forever preferred_lft forever
2.5配置路由信息
[root@DR ~]# route add -host 192.168.207.200 dev lo
[root@RS1 ~]# route add -host 192.168.207.200 dev lo
[root@RS2 ~]# route add -host 192.168.207.200 dev lo
2.6在DR上添加规则
[root@DR ~]# yum -y install ipvsadm
[root@DR ~]# ipvsadm -A -t 192.168.159.250:80 -s wrr
[root@DR ~]# ipvsadm -a -t 192.168.159.250:80 -r 192.168.159.132:80 -g
[root@DR ~]# ipvsadm -a -t 192.168.159.250:80 -r 192.168.159.136:80 -g
[root@DR ~]# ipvsadm -Sn > /etc/sysconfig/ipvsadm
[root@DR ~]# ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.207.200:80 wrr
-> 192.168.207.130:80 Route 1 0 0
-> 192.168.207.131:80 Route 1 0 0
2.7在RS上配置http
[root@RS1 ~]# yum -y install httpd
[root@RS1 ~]# echo 'This is RS1' > /var/www/html/index.html
[root@RS1 ~]# systemctl start httpd
[root@RS2 ~]# yum -y install httpd
[root@RS2 ~]# echo 'This is RS2' > /var/www/html/index.html
[root@RS2 ~]# systemctl start httpd
2.8客户端访问验证
[root@longnian ~]# for i in $(seq 10);do curl 192.168.159.250;done
This is RS1
This is RS2
This is RS1
This is RS2
This is RS1
This is RS2
This is RS1
This is RS2
This is RS1
This is RS2
3.搭建HTTPS负载均衡集群
3.1生成证书
//生成一对密钥
[root@DR ~]# cd /etc/pki/CA/
[root@DR CA]# (umask 077;openssl genrsa -out private/cakey.pem 2048)
Generating RSA private key, 2048 bit long modulus
.......+++
.......+++
e is 65537 (0x10001)
//生成自签署证书
[root@DR CA]# openssl req -new -x509 -key private/cakey.pem -out cacert.pem -days 365
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [XX]:CN
State or Province Name (full name) []:HB
Locality Name (eg, city) [Default City]:WH
Organization Name (eg, company) [Default Company Ltd]:www.a.com
Organizational Unit Name (eg, section) []:www.a.com
Common Name (eg, your name or your server's hostname) []:www.a.com
Email Address []:123@qq.com
//在RS生成证书签署请求，并发送给CA
[root@RS1 ~]# mkdir /etc/httpd/ssl
[root@RS1 ~]# cd /etc/httpd/ssl
[root@RS1 ssl]# (umask 077;openssl genrsa -out httpd.key 2048)
Generating RSA private key, 2048 bit long modulus
...........................................................................................................+++
................................................+++
e is 65537 (0x10001)
[root@RS1 ssl]# openssl req -new -key httpd.key -days 1024 -out httpd.csr
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [XX]:CN
State or Province Name (full name) []:HB
Locality Name (eg, city) [Default City]:WH
Organization Name (eg, company) [Default Company Ltd]:www.a.com
Organizational Unit Name (eg, section) []:www.a.com
Common Name (eg, your name or your server's hostname) []:www.a.com
Email Address []:123@qq.com
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:
An optional company name []:
[root@RS1 ssl]# scp httpd.csr root@192.168.159.135:/root/
The authenticity of host '192.168.159.135 (192.168.159.135)' can't be established.
ECDSA key fingerprint is 03:18:89:32:f3:e7:3e:8b:44:2a:9c:ed:0a:8f:53:6f.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.159.135' (ECDSA) to the list of known hosts.
root@192.168.159.135's password:
httpd.csr 100% 1033 1.0KB/s 00:00
//CA签署证书并发给客户端
[root@DR ~]# openssl ca -in /root/httpd.csr -out httpd.crt -days 365
Using configuration from /etc/pki/tls/openssl.cnf
Check that the request matches the signature
Signature ok
Certificate Details:
Serial Number: 2 (0x2)
Validity
Not Before: Jul 24 11:25:38 2020 GMT
Not After : Jul 24 11:25:38 2021 GMT
Subject:
countryName = CN
stateOrProvinceName = HB
organizationName = www.a.com
organizationalUnitName = www.a.com
commonName = www.a.com
emailAddress = 123@qq.com
X509v3 extensions:
X509v3 Basic Constraints:
CA:FALSE
Netscape Comment:
OpenSSL Generated Certificate
X509v3 Subject Key Identifier:
AC:14:97:6A:0F:9C:62:70:9A:C9:4C:AD:C6:0E:EC:63:93:67:A4:44
X509v3 Authority Key Identifier:
keyid:16:FC:92:C6:94:8B:B8:31:B4:CE:12:EF:43:E4:7D:D1:C5:95:00:C6
Certificate is to be certified until Jul 24 11:25:38 2021 GMT (365 days)
Sign the certificate? [y/n]:y
1 out of 1 certificate requests certified, commit? [y/n]y
Write out database with 1 new entries
Data Base Updated
[root@DR ~]# ls
httpd.crt httpd.csr
//CA把签署好的证书httpd.crt和服务端的证书cacert.pem发给客户端
[root@DR ~]# scp httpd.crt root@192.168.159.132:/etc/httpd/ssl
root@192.168.159.132's password:
httpd.crt 100% 4565 4.5KB/s 00:00
[root@DR ~]# scp httpd.crt root@192.168.159.136:/etc/httpd/ssl
The authenticity of host '192.168.159.136 (192.168.159.136)' can't be established.
ECDSA key fingerprint is 3d:0e:f3:00:71:87:a5:a0:ec:a4:64:95:e0:bc:78:2b.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.159.136' (ECDSA) to the list of known hosts.
root@192.168.159.136's password:
httpd.crt 100% 4565 4.5KB/s 00:00
[root@DR ~]# scp /etc/pki/CA/cacert.pem root@192.168.159.136:/etc/httpd/ssl
root@192.168.159.136's password:
cacert.pem 100% 1383 1.4KB/s 00:00
3.2配置HTTPS
在RS1上将httpd.key传给RS2,并在RS上安装ssl模块
[root@RS1 ~]# cd /etc/httpd/ssl/
[root@RS1 ssl]# ls
httpd.crt httpd.csr httpd.key
[root@RS1 ssl]# scp httpd.key root@192.168.159.136:/etc/httpd/ssl/
The authenticity of host '192.168.159.136 (192.168.159.136)' can't be established.
ECDSA key fingerprint is 3d:0e:f3:00:71:87:a5:a0:ec:a4:64:95:e0:bc:78:2b.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.159.136' (ECDSA) to the list of known hosts.
root@192.168.159.136's password:
httpd.key 100% 1679 1.6KB/s 00:00
[root@RS1 ssl]# yum -y install mod_ssl
[root@RS2 ssl]# ls
cacert.pem httpd.crt httpd.key
[root@RS2 ssl]# yum -y install mod_ssl
在RS上编辑配置文件
[root@RS1 ~]# vim /etc/httpd/conf.d/ssl.conf
<VirtualHost _default_:443>
# General setup for the virtual host, inherited from global configuration
//将下面两行删除注释，并修改域名
DocumentRoot "/var/www/html"
ServerName aaa.com:443
...
//修改下面没有带注释的行
# certificate can be generated using the genkey(1) command.
SSLCertificateFile /etc/httpd/ssl/httpd.crt
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/httpd/ssl/httpd.key
...
...
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
SSLCACertificateFile /etc/httpd/ssl/cacert.pem
[root@RS1 ~]# systemctl restart httpd
//RS2同上.....
3.3在DR上配置规则
[root@DR ~]# ipvsadm -A -t 192.168.159.250:443 -s rr
[root@DR ~]# ipvsadm -a -t 192.168.159.250:443 -r 192.168.159.132 -m
[root@DR ~]# ipvsadm -a -t 192.168.159.250:443 -r 192.168.159.136 -m
[root@DR ~]# ipvsadm -Sn > /etc/sysconfig/ipvsadm
[root@DR ~]# ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.159.250:80 wrr
-> 192.168.159.132:80 Route 1 0 0
-> 192.168.159.136:80 Route 1 0 0
TCP 192.168.159.250:443 rr
-> 192.168.159.132:443 Masq 1 0 0
-> 192.168.159.136:443 Masq 1 0 0
TCP 192.168.159.250:3306 rr
-> 192.168.159.132:3306 Route 1 0 0
-> 192.168.159.136:3306 Route 1 0 0
4.验证
[root@longnian ~]# for i in $(seq 10);do curl -k https://192.168.159.250;done
This is RS1
This is RS2
This is RS1
This is RS2
This is RS1
This is RS2
This is RS1
This is RS2
This is RS1
This is RS2
扫一扫
2103
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
