HCIA第五次实验

The device is running!

<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sy    
[Huawei]sysname r1
[r1]user-interface console 0
[r1-ui-console0]id    
[r1-ui-console0]idle-timeout 0 0
[r1-ui-console0]quit
[r1]user-interface console 0
[r1-ui-console0]
[r1-ui-console0]quit
[r1]user-interface console 0quit
                           ^
Error: Wrong parameter found at '^' position.
[r1]int    
[r1]interface g0/0/2
[r1-GigabitEthernet0/0/2]ip ad    
[r1-GigabitEthernet0/0/2]ip address 12.1.1.1 24
Nov 22 2022 16:56:39-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[r1-GigabitEthernet0/0/2]quit
[r1]ospf 1 router-id 1.1.1.1
[r1-ospf-1]ar    
[r1-ospf-1]area 1
[r1-ospf-1-area-0.0.0.1]net    
[r1-ospf-1-area-0.0.0.1]network 1.1.1.1 0.0.0.0
[r1-ospf-1-area-0.0.0.1]quit
[r1-ospf-1]quit
[r1]int    
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ospf authentication-mode simple cipher 123
[r1-GigabitEthernet0/0/0]ospf timer hello 5
 

The device is running!

<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sy    
[Huawei]sysname r2
[r2]user-interface console 0
[r2-ui-console0]
[r2-ui-console0]idle-timeout 0 0
[r2-ui-console0]
[r2-ui-console0]quit
[r2]int    
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip ad    
[r2-GigabitEthernet0/0/0]ip address 12.1.1.2 24
Nov 22 2022 16:57:26-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r2-GigabitEthernet0/0/0]int g0/0/1
[r2-GigabitEthernet0/0/1]ip ad    
[r2-GigabitEthernet0/0/1]ip address 23.1.1.1 24
Nov 22 2022 16:57:59-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r2-GigabitEthernet0/0/1]quit
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]ar    
[r2-ospf-1]area 1
[r2-ospf-1-area-0.0.0.1] 2.2.2.2 0.0.0.0
                        ^
Error: Unrecognized command found at '^' position.
[r2-ospf-1-area-0.0.0.1]quit
[r2-ospf-1]quit
[r2]int    
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ospf authentication-mode simple cipher 123
 

The device is running!

<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sy    
[Huawei]sysname r3
[r3]use    
[r3]user-bind
[r3]user-group
[r3]user-interface
[r3]user-bind
              ^
Error:Incomplete command found at '^' position.
[r3]user-interface console 0
[r3-ui-console0]idle-timeout 0 0
[r3-ui-console0]
[r3-ui-console0]
[r3-ui-console0]quit
[r3]int    
[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]ip ad    
[r3-GigabitEthernet0/0/0]ip address 23.1.1.2 24
Nov 22 2022 16:58:28-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ip ad    
[r3-GigabitEthernet0/0/1]ip address 123.1.1.1 24
Nov 22 2022 16:59:14-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r3-GigabitEthernet0/0/1]quit
[r3]ospf 1 router-id 3.3.3.3
[r3-ospf-1] ar    
[r3-ospf-1]area 1
[r3-ospf-1-area-0.0.0.1]network 3.3.3.3 0.0.0.0
[r3-ospf-1-area-0.0.0.1]quit
[r3-ospf-1]ar    
[r3-ospf-1]arp-ping
[r3-ospf-1]area 2
[r3-ospf-1-area-0.0.0.2]quit
[r3-ospf-1]area 0
[r3-ospf-1-area-0.0.0.0]network 123.1.1.1 0.0.0.0
[r3-ospf-1-area-0.0.0.0]quit
[r3-ospf-1]quit
[r3]int    
[r3]interface g0/0/1
[r3-GigabitEthernet0/0/1]ospf dr-priority 2
 

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sy    
[Huawei]sysname r4
[r4]user-interface console 0
[r4-ui-console0]
[r4-ui-console0]idle-timeout 0 0
[r4-ui-console0]
[r4-ui-console0]
[r4-ui-console0]quit
[r4]ine    
[r4]int    
[r4]interface g0/0/1
[r4-GigabitEthernet0/0/1]ip ad    
[r4-GigabitEthernet0/0/1]ip address 123.1.1.4 24
Nov 22 2022 17:02:32-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r4-GigabitEthernet0/0/1]int g0/0/0
[r4-GigabitEthernet0/0/0]ip ad    
[r4-GigabitEthernet0/0/0]ip address 45.1.1.1 24
[r4-GigabitEthernet0/0/0]
Nov 22 2022 17:03:01-08:00 r4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r4-GigabitEthernet0/0/0]quit
[r4]ospf 1 ro    
[r4]ospf 1 router-id 4.4.4.4
[r4-ospf-1]area 0
[r4-ospf-1-area-0.0.0.0]ne    
[r4-ospf-1-area-0.0.0.0]network 4.4.4.4 0.0.0.0
[r4-ospf-1-area-0.0.0.0]quit
[r4-ospf-1]quit
[r4]int    
[r4]interface g0/0/1
[r4-GigabitEthernet0/0/1]ospf dr-priority 0
 

The device is running!

<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sy    
[Huawei]sysname r5
[r5]user-interface console 0
[r5-ui-console0]
[r5-ui-console0]idle-timeout 0 0
[r5-ui-console0]
[r5-ui-console0]
[r5-ui-console0]quit
[r5]int    
[r5]interface g0/0/1
[r5-GigabitEthernet0/0/1]ip ad    
[r5-GigabitEthernet0/0/1]ip address 45.1.1.2 24
[r5-GigabitEthernet0/0/1]
Nov 22 2022 17:03:38-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r5-GigabitEthernet0/0/1]int g0/0/2
[r5-GigabitEthernet0/0/2]ip ad    
[r5-GigabitEthernet0/0/2]ip address 123.1.1.5 24
Nov 22 2022 17:04:06-08:00 r5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[r5-GigabitEthernet0/0/2]int g0/0/0
[r5-GigabitEthernet0/0/0]ip ad    
[r5-GigabitEthernet0/0/0]ip address 56.1.1.1 24
[r5-GigabitEthernet0/0/0]
Nov 22 2022 17:04:38-08:00 r5 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r5-GigabitEthernet0/0/0]quit
[r5]ospf 1 router-id 5.5.5.5
[r5-ospf-1]area 0
[r5-ospf-1-area-0.0.0.0]net    
[r5-ospf-1-area-0.0.0.0]network 5.5.5.5 0.0.0.0
[r5-ospf-1-area-0.0.0.0]quit
[r5-ospf-1]quit
[r5]int    
[r5]interface g0/0/2
[r5-GigabitEthernet0/0/2]ospf dr-priority 0
 

The device is running!

<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sy    
[Huawei]sysname r6
[r6]user-interface console 0
[r6-ui-console0]
[r6-ui-console0]idle-timeout 0 0
[r6-ui-console0]
[r6-ui-console0]
[r6-ui-console0]quit
[r6]int    
[r6]interface g0/0/1
[r6-GigabitEthernet0/0/1]ip ad    
[r6-GigabitEthernet0/0/1]ip address 56.1.1.2 24
Nov 22 2022 17:05:01-08:00 r6 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r6-GigabitEthernet0/0/1]int g0/0/0
[r6-GigabitEthernet0/0/0]123.1.1.6 24
                         ^
Error: Unrecognized command found at '^' position.
[r6-GigabitEthernet0/0/0]quit
[r6]ospf 1 router-id 6.6.6.6
[r6-ospf-1]area 0
[r6-ospf-1-area-0.0.0.0]net    
[r6-ospf-1-area-0.0.0.0]network 6.6.6.6 0.0.0.0
[r6-ospf-1-area-0.0.0.0]quit
[r6-ospf-1]quit
[r6]int
        ^
Error:Incomplete command found at '^' position.
[r6]int    
[r6]interface g0/0/0
[r6-GigabitEthernet0/0/0]ospf dr-priority 0