1. Battery maintenance: Before operating the riding floor scrubber, you should confirm the amount of power. Do not operate it under voltage, which should have a great impact on its damage. The floor scrubber should be charged in time after use. The charger should be charged continuously for 30 minutes to an hour, but do not overcharge. If the riding floor scrubber is not used for a long time, the battery should be charged at least once every half a month.
2. Water tank maintenance After the floor scrubber is finished cleaning, the sewage in the sewage tank should be disposed of in time. At the same time, the bottom of the sewage tank should be repeatedly rinsed with some clean water to avoid clogging the drainage pipe. At the same time, the corrosion of sewage to the water phase should be minimized. In fact, the water absorption device below should be maintained. After the floor scrubber is finished cleaning, it should be rinsed with clean water and wiped dry with a rag.
3. Hose maintenance: There are some fine hoses on the ride-on floor scrubber, such as water hoses, etc. No matter which type of hose, it must be returned to its original position after use, and the water hose must be placed in a fixed slot to reduce the impact of large-angle bending on the water hose. At the same time, maintaining the water sense is conducive to extending the service life.
During the use of the ride-on floor scrubber, attention should be paid to the maintenance and care of some frequently used parts. Only by performing maintenance and care in accordance with the regulations after daily operation and wiping and cleaning the corresponding parts can the service life of the equipment be extended and its cost reduced.
174
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
