MTK wifi 驱动相关

wmt_chrdev_wifi.c :

#define WIFI_DEV_MAJOR 153  <--->对应init.rc中创建的设备节点 /xxx/mediatek/custom/jrdsh75_cu_jb/factory/init.rc
static int WIFI_major = WIFI_DEV_MAJOR;  
WIFI_init()
dev_t dev = MKDEV(WIFI_major, 0);
-->cdev_init  (&WIFI_cdev, &WIFI_fops)-->struct file_operations WIFI_fops = {
    .open = WIFI_open,
    .release = WIFI_close,
    .write = WIFI_write,
};
-->WIFI_open()
-->WIFI_close()
-->WIFI_write()


上层开wifi调用驱动
mtk_wifi.c：
-->wifi_set_power(int enable)
-->halDoCommand("load wifi");//调用驱动
。。。。。
HaldController.cpp
-->int HaldController::loadDriver(const char *ifname)
{
            ALOGD("Start load wifi driver.");
            /*load wifi driver*/
            sDriverCtrl->load(NETWORK_IFACE_WIFI);
           /*turn on wifi power*/
             powerOn();
            /*set flag*/
            isWifiActive = true;
            return 0;
}
-->powerOn()
{
  setPower(1);
}
-->void HaldController::setPower(int enable) 
{
373    const char buffer = (enable ? '1' : '0');
374
375    fd = open(WIFI_POWER_PATH, O_WRONLY); //打开节点？？ #define WIFI_POWER_PATH     "/dev/wmtWifi"
376    if (fd < 0) {
377        ALOGE("Open \"%s\" failed", WIFI_POWER_PATH);
378        goto out;
379    }
380     sz = write(fd, &buffer, 1);
381    if (sz < 0) {
382        ALOGE("Set \"%s\" [%c] failed", WIFI_POWER_PATH, buffer);
383        goto out;
384    }


}
//节点创建 init.rc
 mknod /dev/wmtWifi c 153 0  <---> 对应wmt_chrdev_wifi.c #define WIFI_DEV_MAJOR 153
因此上层从 
fd = open(WIFI_POWER_PATH, O_WRONLY);执行到wmt_chrdev_wifi.c 中open 
sz = write(fd, &buffer, 1); 执行到wmt_chrdev_wifi.c 中write


Settings.java(mWifiEnabler)-->WifiEnabler.java(mWifiManager)-->WifiManager.java(mservices)-->IWifiManager.aidl-->WifiService.java( mWifiStateMachine.setWifiEnabled(enable);
)-->WifiStateMachine.java({
    public void setWifiEnabled(boolean enable) {
        mLastEnableUid.set(Binder.getCallingUid());
        if (enable) {
            /* Argument is the state that is entered prior to load */
            sendMessage(obtainMessage(CMD_LOAD_DRIVER, WIFI_STATE_ENABLING, 0));//加载驱动
            sendMessage(CMD_START_SUPPLICANT);//用于数据通信
        } else {
            sendMessage(CMD_STOP_SUPPLICANT);
            /* Argument is the state that is entered upon success */
            sendMessage(obtainMessage(CMD_UNLOAD_DRIVER, WIFI_STATE_DISABLED, 0));
        }
    }




})-->WifiNative.java(mwifinative.loadDriver())-->android_net_wifi_wifi.cpp(android_net_wifi_loadDriver())-->mtk_wifi.c(wifi_load_driver())??(有木有已经和上面接轨了！！)


芯片上电
wmt_ctrl.c -->wmt_ctrl_hw_pwr_on(P_WMT_CTRL_DATA pWmtCtrlData)<wmt_plat_pwr_ctrl(FUNC_ON)> --wmt_plat_alps.c-->INT32 wmt_plat_pwr_ctrl (   ENUM_FUNC_STATE state    )--<    case FUNC_ON:
        // TODO:[ChangeFeature][George] always output this or by request throuth /proc or sysfs?
        wmt_plat_dump_pin_conf();
        ret = mtk_wcn_cmb_hw_pwr_on();
>----mtk_wcn_cmb_hw_6628.c-->(mtk_wcn_cmb_hw_pwr_on (VOID)--->找到wifi的管脚中断WIFI_EINT(GPIO15)及外部中断号WIFI_EINT_NUM(18)
)

/XXX/mediatek/custom/jrdsh75_cu_jb/kernel/core/src/board.c -->中断请求
-->通过中断号WIFI_EINT_NUM(18)-->mtk_wcn_cmb_sdio_eint_num=CUST_EINT_WIFI_NUM=18
static void mtk_wcn_cmb_sdio_request_eirq(sdio_irq_handler_t irq_handler, void *data)
{
    mtk_wcn_sdio_irq_flag_set (0);
    mtk_wcn_cmb_sdio_eirq_data    = data;
    mtk_wcn_cmb_sdio_eirq_handler = irq_handler;
    mt65xx_eint_set_sens(mtk_wcn_cmb_sdio_eint_num, CUST_EINT_WIFI_SENSITIVE); /*CUST_EINT_WIFI_NUM */
    mt65xx_eint_set_hw_debounce(mtk_wcn_cmb_sdio_eint_num, CUST_EINT_WIFI_DEBOUNCE_CN); /*CUST_EINT_WIFI_NUM */
    mt_set_gpio_pull_enable(mtk_wcn_cmb_sdio_eint_pin, GPIO_PULL_ENABLE);
    mt_set_gpio_pull_select(mtk_wcn_cmb_sdio_eint_pin, GPIO_PULL_UP);
    mt65xx_eint_registration(mtk_wcn_cmb_sdio_eint_num/*CUST_EINT_WIFI_NUM */,
        CUST_EINT_WIFI_DEBOUNCE_EN,
        CUST_EINT_WIFI_POLARITY,
        mtk_wcn_cmb_sdio_eirq_handler_stub,
        0);
    mt65xx_eint_mask(mtk_wcn_cmb_sdio_eint_num);/*CUST_EINT_WIFI_NUM */


}
-->  .request_sdio_eirq = mtk_wcn_cmb_sdio_request_eirq,
再找request_sdio_eirq相关中断请求----->找到sd.c
  if (hw->request_sdio_eirq) /* set to combo_sdio_request_eirq() for WIFI */
        hw->request_sdio_eirq(msdc_eirq_sdio, (void*)host); /* msdc_eirq_sdio() will be called when EIRQ */
-->找到msdc_eirq_sdio------------->中断处理函数
/* msdc_eirq_sdio() will be called when EIRQ(for WIFI) */
static void msdc_eirq_sdio(void *data)
{
    struct msdc_host *host = (struct msdc_host *)data;


    N_MSG(INT, "SDIO EINT");
    mmc_signal_sdio_irq(host->mmc);
}

Gl_init.c-->启动gl_kal.c的tx_thread线程，当这个线程启动后就等待中断处理网络数据的发送与接收。<----->网络驱动函数
sdio.c  ------->static void mtk_sdio_interrupt(struct sdio_func *func)-->wake_up_interruptible(&prGlueInfo->waitq);就会去调用
gl_kal.c --->int tx_thread(void *data)-->ret = wait_event_interruptible(prGlueInfo->waitq,(prGlueInfo->u4Flag != 0));
wlan_lib.c---->wlanTxPendingPackets (
    IN      P_ADAPTER_T prAdapter,
    IN OUT  PBOOLEAN    pfgHwAccess
    )