配置Trunk接口

最新推荐文章于 2024-09-29 22:30:30 发布

告诉桃花不用开了

最新推荐文章于 2024-09-29 22:30:30 发布

阅读量5.2k

点赞数 4

分类专栏：数通技术文章标签：运维其他经验分享

本文链接：https://blog.csdn.net/Gjqhs/article/details/123695051

版权

数通技术专栏收录该内容

5 篇文章 0 订阅

订阅专栏

拓扑图

命令

1.创建VLAN
S1：
sys
sysname S1
vlan 10
description RD
vlan 20
description Market
int e0/0/2
port link-type access
port default vlan 10
int e0/0/3
port link-type access
port default vlan 20
q

S2:
sys
sysname S2
vlan 10
description RD
vlan 20
description Market
int e0/0/3
port link-type access
port default vlan 10
int e0/0/4
port link-type access
port default vlan 20
q

S3:
sys
sysname S3
vlan 10
description RD
vlan 20
description Market
q

display vlan
S3:
display vlan summary
S1 S2:
display port vlan

2.测试PC1和PC3的连通性

3.配置Trunk端口
S1:
int e0/0/1
port link-type trunk
port trunk allow-pass vlan 10 20
q

S2:
int e0/0/2
port link-type trunk
port trunk allow-pass vlan 10 20
q

display port vlan

S3:
int g0/0/1
port link-type trunk
port trunk allow-pass vlan all
int g0/0/2
port link-type trunk
port trunk allow-pass vlan all
q