总结
函数由函数头和函数体组成。函数头指出函数的返回值(如果有的话即不为void)的类型和参数类型。函数先声明(或先定义),后使用。
const 声明常量。
一、第一题
题目:编写一个小程序,要求用户使用一个整数指出自己的身高(单位为英寸),然后将身高转换为英尺和英寸。该程序使用下划线来指示输入位置。另外,使用一个const符号常量来表示转换因子。
(一英尺为12英寸)
#include <iostream>
const int FEETSINCH = 12;
int main() {
int inchS;
std::cout << "请输入身高(英寸): ";
std::cin >> inchS;
std::cout << "身高:" << inchS / FEETSINCH << "英尺" << inchS % FEETSINCH << "英寸";
return 0;
}
}
二、第二题
题目:编写一个C++程序,要求以几英尺几英寸的方式输入其身高,并以磅为单位输入其体重。(使用3个变量来存储这些信息。)该程序报告其BMI(Body Mass Index, 体重指数)。
为了计算BMI,该程序以英寸的方式指出用户的身高(1英尺为12英寸),并将以英寸为单位的身高转换为以米为单位的身高(1英寸=0.0254米)。然后,将以磅为单位的体重转换为以千克为单位的体重(1千克=2.2磅)。最后,计算相应的BMI——体重(千克)除以身高(米)的平方。用符号常量表示各种转换因子。
#include <iostream>
double calBMI(int feetS_, int inchS_, int poundS_);
int main() {
int feetS, inchS, poundS;
std::cout << "请输入身高_英尺_英寸:";
std::cin >> feetS >> inchS;
std::cout << "请输入体重(磅):";
std::cin >> poundS;
std::cout << "BMI: " << calBMI(feetS, inchS, poundS);
return 0;
}
double calBMI(int feetS_, int inchS_, int poundS_) {
int inchSum = feetS_ * 12 + inchS_;
double meterS = inchSum * 0.0254;
double kGS = poundS_ / 2.2;
return kGS / meterS;
}
}
三、第三题
题目:编写一个程序,要求用户以度、分、秒的方式输入一个纬度,然后以度为单位显示该维度。1度为60分,1分等于60秒,请以符号常量的方式表示这些值。对于每个输入值,应使用一个独立的变量存储它。
下面是该程序运行时的情况:
Enter a latitude in degrees, minutes, and seconds:
First, enter the degrees: 37
Next, enter the minutes of arc: 51
Finally, enter the seconds of arc: 19
37 degrees, 51 minutes, 19 seconds = 37.8553 degrees
#include <iostream>
double Calculate(double de, double mi, double se);
int main() {
double degrees;
double minutes;
double seconds;
std::cout << "First,Enter hte degres: ";
std::cin >> degrees;
std::cout << "please input minutes: ";
std::cin >> minutes;
std::cout << "please input seconds: ";
std::cin >> seconds;
std::cout << Calculate(degrees, minutes, seconds);
}
double Calculate(double de, double mi, double se) {
return de + mi / 60 + se / 3600;
}
四、第四题
题目:编写一个程序,要求用户以整数的方式输入秒数(使用long或 long long 变量存储),然后天、小时,分钟和秒的方式显示这段时间,使用符号常量来表示每天有多少小时、每小时有多少分钟以及每分钟有多少秒。该程序的输出应与下面类似:
Enter the number of seconds:31600000
31600000 seconds = 365 days, 17 hours, 46 minutes, 40 seconds
#include <iostream>
void tranformtime(long seconds_);
int main() {
const int hoursperday_ = 24;
const int minutespermour = 60;
const int secondspermminute = 60;
long seconds;
std::cout << "enter the number of seconds: ";
std::cin >> seconds;
tranformtime(seconds);
}
void tranformtime(long seconds_) {
int days = seconds_ / 24 / 60 / 60;
int hours = (seconds_ - days * 24 * 3600)/ 3600;
int minutes = (seconds_ - days * 24 * 3600 - hours * 3600) / 60;
int seconds = seconds_ - days * 24 * 3600 - hours * 3600 - minutes * 60;
std::cout << days << " days, " << hours << " hours, " << minutes
<< " minutes, " << seconds << " seconds.";
}
五、第五题
题目:编写一个程序,要求用户输入全球当前人口和美国当前人口(或其他国家的人口),将这些信息存储在long long 变量中,并让程序显示美国(或其他国家)的人口占全球人口的百分比,该程序的输出应与下面类似:
Enter the world’s population:6898758899
Enter the population of the US:310783781
The population of the US is 4.50492% of the world population.
#include <iostream>
void showpercent(long long population, long long population_us);
int main() {
long long population;
long long population_us;
std::cout << "enter the world's population: ";
std::cin >> population;
std::cout << "enter the population of us: ";
std::cin >> population_us;
showpercent(population, population_us);
}
void showpercent(long long population, long long population_us) {
double percent = double(population_us) / population * 100;
std::cout << percent<<"%";
}
六、第六题
题目:编写一个程序,要求用户输入驱车里程(英里)和使用汽油量(加仑),然后指出汽车耗油量为一加仑的里程,如果愿意,也可以让程序要求用户以公里为单位输入距离,并以升为单位输入汽油量,然后指出欧洲风格的结果—即每100公里的耗油量(升)。
#include <iostream>
int main() {
float distanceInMile;
float fuelInGallon;
std::cout << "请输入里程(英里):";
std::cin >> distanceInMile;
std::cout << "请输入汽油量(加仑):";
std::cin >> fuelInGallon;
std::cout << "耗油量为:" << distanceInMile / fuelInGallon << "一加仑的里程";
return 0;
}
七、第七题
题目:编写一个程序,要求用户按欧洲风格输入汽车的耗油量(每100公里消耗的汽油量(升)),然后将其转换为美国风格的耗油量—每加仑多少英里。注意,除
了使用不同的单位计量外,美国方法(距离/燃料)与欧洲方法(燃料/距离)相反。100公里等于62.14英里,1加仑等于3.875升。因此,19mpg大约合12.41/100km,127mpg大约合8.71/100km
#include <iostream>
using std::cout;
using std::cin;
const float GALLON_TO_LITER = 3.875;
const float HKM_TO_MILE = 62.14;
int main() {
float fuelE;
float fuelA;
cout << "每100公里消耗的汽油量(升)为:";
cin >> fuelE;
fuelA = GALLON_TO_LITER * HKM_TO_MILE / fuelE / 100;
cout << "转换为每加仑多少英里为:"<<fuelA;
return 0;
}
谢谢观看,祝顺利。