IT6151FN: MIPI to eDP Converter

The IT6151 is a high-performance and low-power MIPI to eDP converter, fully compliant with MIPI D-PHY 1.1, DSI 1.1 and eDP 1.3 specifications. 
IT6151是一款高性能、低功耗的MIPI到eDP转换器，完全符合MIPI D-PHY 1.1、DSI 1.1和eDP 1.3规范。

The IT6151 supports four lanes MIPI RX and four lane eDP TX interface. 
IT6151支持四通道MIPI RX接口和四通道eDP TX接口。

The data transfer rate of MIPI RX is up to 1Gbps per lane and both RBR/HBR are supported by eDP TX interface.
MIPI RX的数据传输速率高达每通道1Gbps, eDP TX接口同时支持RBR/HBR。

To reduce the power consumption, Panel Self Refresh (PSR) function is supported by the IT6151. 
为了降低功耗，IT6151支持PSR (Panel Self Refresh)功能。

Various low power options are implemented to reduce the dynamic operation power when PSR function is enabled. 
实现多种低功耗选项，以降低PSR功能时的动态运行功率。

Dedicated hardware pin or firmware control through I2C can easy set the IT6151 to standby mode, which is the extremely low-power state used for no display condition. 
通过I2C的专用硬件引脚或固件控制可以轻松将IT6151设置为待机模式，这是在无显示条件下使用的极低功耗状态。

With flexible MIPI RX and eDP TX lanel configurations, system can adopt the most adequate configuration for the selected display resolution. 
灵活的MIPI RX和eDP TX面板配置，系统可以采用最适当的配置为所选的显示分辨率。

All the unused lanes can be set tol power down mode to save further power.
所有未使用的车道都可以设置为关机模式，以进一步节省电力。

The IT6151 provides a user-friendly firmware interface to control the eDP panel through McCs. 
IT6151提供了一个友好的固件界面，可以通过mcc控制eDP面板。

The DPCD registers can also be easily accessed by native AUX read/write commands. 
DPCD寄存器也可以通过本地AUX读/写命令轻松访问。

To assure the protected content is being sent to eDP panel other than a non-HDCP external DP sink,l Alternative Scrambler Seed Reset (ASSR) and Alternative Framing are also supported by the IT6151. 
为了确保受保护的内容被发送到eDP面板而不是非hdcp外部DP接收器，IT6151还支持替代扰频种子重置(ASSR)和替代帧。

With 6 x 6 mm small package and lowl power consumption, the IT6151 is suitable for mobile products nowadays.
IT6151具有6 × 6mm的小封装和低功耗，适用于当今的移动产品。