流水灯与中断

#include<reg52.h>
#include<intrins.h>

#define uint unsigned int
#define uchar unsigned char

uchar temp;
uchar aa;    // 进入中断的次数
uchar num;

sbit dula = P2^6; // 控制数码管段选锁存器
sbit wela = P2^7; // 控制数码管位选锁存器 

uchar code table[] = {
						0x3f,0x06,0x5b,0x4f,
						0x66,0x6d,0x7d,0x07,
						0x7f,0x6f,0x77,0x7c,
						0x39,0x5e,0x79,0x71
					 };

void delay(uint z);

void main()
{
	// 点亮第一个发光二极管
	temp = 0xfe;
	P1 = temp;


	//---------------------------------------------


	// 计数器工作方式1
	TMOD = 0x01;   

    // 赋初值               
	TH0 = (65536 - 50000)/256;        
	TL0 = (65536 - 50000)%256;

	// 开总中断
	EA = 1;

	// 开定时器0中断
	ET0 = 1;

	// 启动定时器
	TR0 =1;


	//---------------------------------------------

	num = 0;

	// 选择所有数码管
	wela = 1;
	P0 = 0x0;
	wela = 0;

	// 初始化数码管显示为0
	dula = 1;
	P0 = table[0];
	dula = 0;

	while(1)
	{
		// 流水灯
		delay(1000);
		temp=_crol_(temp,1);
		P1=temp;
	}
}
 


// 延时约1us
void delay(uint z)
{
	uint x, y;
	for(x = z; x > 0; x--)
		for(y = 110; y > 0; y--);
}



// 定时器0中断函数
void Time0() interrupt 1
{
    // 计数器重新赋初值               
	TH0 = (65536 - 50000)/256;        
	TL0 = (65536 - 50000)%256;

	aa++;

	// 进入中断次数为40次时，改变数码管显示
	if(aa == 40)
	{
		aa = 0;
		num++;
		if (num == 16)
		{
			num = 0;
		}
		dula = 1;
		P0 = table[num];
		dula = 0;
	}
}