" Vimball Archiver by Charles E. Campbell, Jr., Ph.D.
UseVimball
finish
doc/supertab.txt [[[1
308
*supertab.txt*
Authors:
Original: Gergely Kontra <kgergely@mcl.hu>
Current: Eric Van Dewoestine <ervandew@gmail.com> (as of version 0.4)
Contributors:
Christophe-Marie Duquesne <chm.duquesne@gmail.com> (documentation)
Please direct all correspondence to Eric.
This plugin is licensed under the terms of the BSD License. Please see
supertab.vim for the license in its entirety.
==============================================================================
Supertab *supertab*
1. Introduction |supertab-intro|
2. Supertab Usage |supertab-usage|
3. Supertab Options |supertab-options|
Default completion type |supertab-defaultcompletion|
Secondary default completion type |supertab-contextdefault|
Completion contexts |supertab-completioncontexts|
Context text |supertab-contexttext|
Context Discover |supertab-contextdiscover|
Example |supertab-contextexample|
Completion Duration |supertab-duration|
Midword completion |supertab-midword|
Changing default mapping |supertab-forwardbackward|
Inserting true tabs |supertab-mappingtabliteral|
Preselecting the first entry |supertab-longesthighlight|
==============================================================================
1. Introduction *supertab-intro*
Supertab is a plugin which allows you to perform all your insert completion
(|ins-completion|) using the tab key.
Supertab requires Vim version 7.0 or above.
==============================================================================
2. Supertab usage *supertab-usage*
Using Supertab is as easy as hitting <Tab> or <S-Tab> (shift+tab) while in
insert mode, with at least one non whitespace character before the cursor, to
start the completion and then <Tab> or <S-Tab> again to cycle forwards or
backwards through the available completions.
Example ('|' denotes the cursor location):
bar
baz
b|<Tab> Hitting <Tab> here will start the completion, allowing you to
then cycle through the suggested words ('bar' and 'baz').
==============================================================================
3. Supertab Options *supertab-options*
Supertab is configured via several global variables that you can set in your
|vimrc| file according to your needs. Below is a comprehensive list of
the variables available.
g:SuperTabDefaultCompletionType |supertab-defaultcompletion|
The default completion type to use. If you program in languages that support
omni or user completions, it is highly recommended setting this to
'context'.
For help about built in completion types in vim, see |i_CTRL-X_index|.
g:SuperTabContextDefaultCompletionType |supertab-contextdefault|
The default completion type to use when 'context' is the global default, but
context completion has determined that neither omni, user, or file
completion should be used in the current context.
g:SuperTabCompletionContexts |supertab-completioncontexts|
Used to configure a list of function names which are used when the global
default type is 'context'. These functions will be consulted in order to
determine which completion type to use. Advanced users can plug in their own
functions here to customize their 'context' completion.
g:SuperTabRetainCompletionDuration |supertab-duration|
This setting determines how long a non-default completion type should be
retained as the temporary default. By default supertab will retain the
alternate completion type until you leave insert mode.
g:SuperTabMidWordCompletion |supertab-midword|
This can be used to turn off completion if you are in the middle of a word
(word characters immediately preceding and following the cursor).
g:SuperTabMappingForward |supertab-forwardbackward|
g:SuperTabMappingBackward |supertab-forwardbackward|
If using the tab key for completion isn't for you, then you can use these to
set an alternate key to be used for your insert completion needs.
g:SuperTabMappingTabLiteral |supertab-mappingtabliteral|
For those rare cases where supertab would normal want to start insert
completion, but you just want to insert a tab, this setting is used to
define the key combination to use to do just that. By default Ctrl-Tab is
used.
g:SuperTabLongestHighlight |supertab-longesthighlight|
When enabled and you have the completion popup enable and 'longest' in your
completeopt, supertab will auto highlight the first selection in the popup.
Default Completion Type *supertab-defaultcompletion*
*g:SuperTabDefaultCompletionType*
g:SuperTabDefaultCompletionType (default value: "<c-p>")
Used to set the default completion type. There is no need to escape this
value as that will be done for you when the type is set.
Example: setting the default completion to 'user' completion:
let g:SuperTabDefaultCompletionType = "<c-x><c-u>"
Note: a special value of 'context' is supported which will result in
super tab attempting to use the text preceding the cursor to decide which
type of completion to attempt. Currently super tab can recognize method
calls or attribute references via '.', '::' or '->', and file path
references containing '/'.
let g:SuperTabDefaultCompletionType = "context"
/usr/l<tab> # will use filename completion
myvar.t<tab> # will use user completion if completefunc set,
# or omni completion if omnifunc set.
myvar-><tab> # same as above
When using context completion, super tab will fall back to a secondary default
completion type set by |g:SuperTabContextDefaultCompletionType|.
Note: once the buffer has been initialized, changing the value of this setting
will not change the default complete type used. If you want to change the
default completion type for the current buffer after it has been set, perhaps
in an ftplugin, you'll need to call SuperTabSetDefaultCompletionType like so,
supplying the completion type you wish to switch to:
call SuperTabSetDefaultCompletionType("<c-x><c-u>")
Secondary default completion type *supertab-contextdefault*
*g:SuperTabContextDefaultCompletionType*
g:SuperTabContextDefaultCompletionType (default value: "<c-p>")
Sets the default completion type used when g:SuperTabDefaultCompletionType is
set to 'context' and no completion type is returned by any of the configured
contexts.
Completion contexts *supertab-completioncontexts*
*g:SuperTabCompletionContexts*
g:SuperTabCompletionContexts (default value: ['s:ContextText'])
Sets the list of contexts used for context completion. This value should
be a list of function names which provide the context implementation.
When supertab starts the default completion, each of these contexts will be
consulted, in the order they were supplied, to determine the completion type
to use. If a context returns a completion type, that type will be used,
otherwise the next context in the list will be consulted. If after executing
all the context functions, no completion type has been determined, then the
value of g:SuperTabContextDefaultCompletionType will be used.
Built in completion contexts:
s:ContextText *supertab-contexttext*
The text context will examine the text near the cursor to decide which type
of completion to attempt. Currently the text context can recognize method
calls or attribute references via '.', '::' or '->', and file path
references containing '/'.
/usr/l<tab> # will use filename completion
myvar.t<tab> # will use user completion if completefunc set, or
# omni completion if omnifunc set.
myvar-><tab> # same as above
Supported configuration attributes:
g:SuperTabContextTextFileTypeExclusions
List of file types for which the text context will be skipped.
g:SuperTabContextTextOmniPrecedence
List of omni completion option names in the order of precedence that they
should be used if available. By default, user completion will be given
precedence over omni completion, but you can use this variable to give
omni completion higher precedence by placing it first in the list.
s:ContextDiscover *supertab-contextdiscover*
This context will use the 'g:SuperTabContextDiscoverDiscovery' variable to
determine the completion type to use. It will evaluate each value, in the
order they were defined, until a variable evaluates to a non-zero or
non-empty value, then the associated completion type is used.
Supported configuration properties:
g:SuperTabContextDiscoverDiscovery
List of variable:completionType mappings.
Example context configuration: *supertab-contextexample*
let g:SuperTabCompletionContexts = ['s:ContextText', 's:ContextDiscover']
let g:SuperTabContextTextOmniPrecedence = ['&omnifunc', '&completefunc']
let g:SuperTabContextDiscoverDiscovery =
/ ["&completefunc:<c-x><c-u>", "&omnifunc:<c-x><c-o>"]
In addition to the default completion contexts, you can plug in your own
implementation by creating a globally accessible function that returns
the completion type to use (eg. "/<c-x>/<c-u>").
function MyTagContext()
if filereadable(expand('%:p:h') . '/tags')
return "/<c-x>/<c-]>"
endif
" no return will result in the evaluation of the next
" configured context
endfunction
let g:SuperTabCompletionContexts =
/ ['MyTagContext', 's:ContextText', 's:ContextDiscover']
Note: supertab also supports the b:SuperTabCompletionContexts variable
allowing you to set the list of contexts separately for the current buffer,
like from an ftplugin for example.
Completion Duration *supertab-duration*
*g:SuperTabRetainCompletionDuration*
g:SuperTabRetainCompletionDuration (default value: 'insert')
Determines if, and for how long, the current completion type is retained.
The possible values include:
'completion' - The current completion type is only retained for the
current completion. Once you have chosen a completion
result or exited the completion mode, the default
completion type is restored.
'insert' - The current completion type is saved until you exit insert
mode (via ESC). Once you exit insert mode the default
completion type is restored. (supertab default)
'session' - The current completion type is saved for the duration of
your vim session or until you enter a different completion
mode.
Midword completion *supertab-midword*
*g:SuperTabMidWordCompletion*
g:SuperTabMidWordCompletion (default value: 1)
Sets whether or not mid word completion is enabled. When enabled, <tab> will
kick off completion when ever a non whitespace character is to the left of the
cursor. When disabled, completion will only occur if the char to the left is
non whitespace char and the char to the right is not a keyword character (you
are at the end of the word).
Changing the default mapping *supertab-forwardbackward*
*g:SuperTabMappingForward*
*g:SuperTabMappingBackward*
g:SuperTabMappingForward (default value: '<tab>')
g:SuperTabMappingBackward (default value: '<s-tab>')
These two variables allow you to set the keys used to kick off the current
completion. By default this is <tab> and <s-tab>. To change to something
like <c-space> and <s-c-space>, you can add the following to your |vimrc|.
let g:SuperTabMappingForward = '<c-space>'
let g:SuperTabMappingBackward = '<s-c-space>'
Note: if the above does not have the desired effect (which may happen in
console version of vim), you can try the following mappings. Although the
backwards mapping still doesn't seem to work in the console for me, your
milage may vary.
let g:SuperTabMappingForward = '<nul>'
let g:SuperTabMappingBackward = '<s-nul>'
Inserting true tabs *supertab-mappingtabliteral*
*g:SuperTabMappingTabLiteral*
g:SuperTabMappingTabLiteral (default value: '<c-tab>')
Sets the key mapping used to insert a literal tab where supertab would
otherwise attempt to kick off insert completion. The default is '<c-tab>'
(ctrl-tab) which unfortunately might not work at the console. So if you are
using a console vim and want this functionality, you may have to change it to
something that is supported. Alternatively, you can escape the <tab> with
<c-v> (see |i_CTRL-V| for more infos).
Preselecting the first entry *supertab-longesthighlight*
*g:SuperTabLongestHighlight*
g:SuperTabLongestHighlight (default value: 0)
Sets whether or not to pre-highlight the first match when completeopt has the
popup menu enabled and the 'longest' option as well. When enabled, <tab> will
kick off completion and pre-select the first entry in the popup menu, allowing
you to simply hit <enter> to use it.
vim:tw=78:ts=8:ft=help:norl:
plugin/supertab.vim [[[1
510
" Author:
" Original: Gergely Kontra <kgergely@mcl.hu>
" Current: Eric Van Dewoestine <ervandew@gmail.com> (as of version 0.4)
" Please direct all correspondence to Eric.
" Version: 1.0
" GetLatestVimScripts: 1643 1 :AutoInstall: supertab.vim
"
" Description: {{{
" Use your tab key to do all your completion in insert mode!
" You can cycle forward and backward with the <Tab> and <S-Tab> keys
" Note: you must press <Tab> once to be able to cycle back
"
" http://www.vim.org/scripts/script.php?script_id=1643
" }}}
"
" License: {{{
" Software License Agreement (BSD License)
"
" Copyright (c) 2002 - 2009
" All rights reserved.
"
" Redistribution and use of this software in source and binary forms, with
" or without modification, are permitted provided that the following
" conditions are met:
"
" * Redistributions of source code must retain the above
" copyright notice, this list of conditions and the
" following disclaimer.
"
" * Redistributions in binary form must reproduce the above
" copyright notice, this list of conditions and the
" following disclaimer in the documentation and/or other
" materials provided with the distribution.
"
" * Neither the name of Gergely Kontra or Eric Van Dewoestine nor the names
" of its contributors may be used to endorse or promote products derived
" from this software without specific prior written permission of Gergely
" Kontra or Eric Van Dewoestine.
"
" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
" IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
" THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
" CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
" EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
" PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
" PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
" LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
" NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
" SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
" }}}
"
" Testing Info: {{{
" Running vim + supertab with the absolute bar minimum settings:
" $ vim -u NONE -U NONE -c "set nocp | runtime plugin/supertab.vim"
" }}}
if v:version < 700
finish
endif
if exists('complType') " Integration with other completion functions.
finish
endif
let s:save_cpo=&cpo
set cpo&vim
" Global Variables {{{
if !exists("g:SuperTabDefaultCompletionType")
let g:SuperTabDefaultCompletionType = "<c-p>"
endif
if !exists("g:SuperTabContextDefaultCompletionType")
let g:SuperTabContextDefaultCompletionType = "<c-p>"
endif
if !exists("g:SuperTabCompletionContexts")
let g:SuperTabCompletionContexts = ['s:ContextText']
endif
if !exists("g:SuperTabRetainCompletionDuration")
let g:SuperTabRetainCompletionDuration = 'insert'
endif
if !exists("g:SuperTabMidWordCompletion")
let g:SuperTabMidWordCompletion = 1
endif
if !exists("g:SuperTabMappingForward")
let g:SuperTabMappingForward = '<tab>'
endif
if !exists("g:SuperTabMappingBackward")
let g:SuperTabMappingBackward = '<s-tab>'
endif
if !exists("g:SuperTabMappingTabLiteral")
let g:SuperTabMappingTabLiteral = '<c-tab>'
endif
if !exists("g:SuperTabLongestHighlight")
let g:SuperTabLongestHighlight = 0
endif
" }}}
" Script Variables {{{
" construct the help text.
let s:tabHelp =
/ "Hit <CR> or CTRL-] on the completion type you wish to switch to./n" .
/ "Use :help ins-completion for more information./n" .
/ "/n" .
/ "|<c-n>| - Keywords in 'complete' searching down./n" .
/ "|<c-p>| - Keywords in 'complete' searching up (SuperTab default)./n" .
/ "|<c-x><c-l>| - Whole lines./n" .
/ "|<c-x><c-n>| - Keywords in current file./n" .
/ "|<c-x><c-k>| - Keywords in 'dictionary'./n" .
/ "|<c-x><c-t>| - Keywords in 'thesaurus', thesaurus-style./n" .
/ "|<c-x><c-i>| - Keywords in the current and included files./n" .
/ "|<c-x><c-]>| - Tags./n" .
/ "|<c-x><c-f>| - File names./n" .
/ "|<c-x><c-d>| - Definitions or macros./n" .
/ "|<c-x><c-v>| - Vim command-line./n" .
/ "|<c-x><c-u>| - User defined completion./n" .
/ "|<c-x><c-o>| - Omni completion./n" .
/ "|<c-x>s| - Spelling suggestions."
" set the available completion types and modes.
let s:types =
/ "/<c-e>/<c-y>/<c-l>/<c-n>/<c-k>/<c-t>/<c-i>/<c-]>" .
/ "/<c-f>/<c-d>/<c-v>/<c-n>/<c-p>/<c-u>/<c-o>/<c-n>/<c-p>s"
let s:modes = '/^E/^Y/^L/^N/^K/^T/^I/^]/^F/^D/^V/^P/^U/^O/s'
let s:types = s:types . "np"
let s:modes = s:modes . '/n/p'
" }}}
" SuperTabSetDefaultCompletionType(type) {{{
" Globally available function that users can use to set the default
" completion type for the current buffer, like in an ftplugin.
function! SuperTabSetDefaultCompletionType(type)
" init hack for <c-x><c-v> workaround.
let b:complCommandLine = 0
let b:SuperTabDefaultCompletionType = a:type
" set the current completion type to the default
call SuperTabSetCompletionType(b:SuperTabDefaultCompletionType)
endfunction " }}}
" SuperTabSetCompletionType(type) {{{
" Globally available function that users can use to create mappings to quickly
" switch completion modes. Useful when a user wants to restore the default or
" switch to another mode without having to kick off a completion of that type
" or use SuperTabHelp. Note, this function only changes the current
" completion type, not the default, meaning that the default will still be
" restored once the configured retension duration has been met (see
" g:SuperTabRetainCompletionDuration). To change the default for the current
" buffer, use SuperTabDefaultCompletionType(type) instead. Example mapping to
" restore SuperTab default:
" nmap <F6> :call SetSuperTabCompletionType("<c-p>")<cr>
function! SuperTabSetCompletionType(type)
exec "let b:complType = /"" . escape(a:type, '<') . "/""
endfunction " }}}
" SuperTabAlternateCompletion(type) {{{
" Function which can be mapped to a key to kick off an alternate completion
" other than the default. For instance, if you have 'context' as the default
" and want to map ctrl+space to issue keyword completion.
" Note: due to the way vim expands ctrl characters in mappings, you cannot
" create the alternate mapping like so:
" imap <c-space> <c-r>=SuperTabAlternateCompletion("<c-p>")<cr>
" instead, you have to use /<lt> to prevent vim from expanding the key
" when creating the mapping.
" gvim:
" imap <c-space> <c-r>=SuperTabAlternateCompletion("/<lt>c-p>")<cr>
" console:
" imap <nul> <c-r>=SuperTabAlternateCompletion("/<lt>c-p>")<cr>
function! SuperTabAlternateCompletion(type)
call SuperTabSetCompletionType(a:type)
" end any current completion before attempting to start the new one.
" use feedkeys to prevent possible remapping of <c-e> from causing issues.
"call feedkeys("/<c-e>", 'n')
" ^ since we can't detect completion mode vs regular insert mode, we force
" vim into keyword completion mode and end that mode to prevent the regular
" insert behavior of <c-e> from occurring.
call feedkeys("/<c-x>/<c-p>/<c-e>", 'n')
call feedkeys(b:complType)
return ''
endfunction " }}}
" s:Init {{{
" Global initilization when supertab is loaded.
function! s:Init()
augroup supertab_init
autocmd!
autocmd BufEnter * call <SID>InitBuffer()
augroup END
" ensure InitBuffer gets called for the first buffer, after the ftplugins
" have been called.
augroup supertab_init_first
autocmd!
autocmd FileType <buffer> call <SID>InitBuffer()
augroup END
" Setup mechanism to restore orignial completion type upon leaving insert
" mode if configured to do so
if g:SuperTabRetainCompletionDuration == 'insert'
augroup supertab_retain
autocmd!
autocmd InsertLeave * call s:SetDefaultCompletionType()
augroup END
endif
endfunction " }}}
" s:InitBuffer {{{
" Per buffer initilization.
function! s:InitBuffer()
if exists("b:complType")
return
endif
" init hack for <c-x><c-v> workaround.
let b:complCommandLine = 0
let b:SuperTabDefaultCompletionType = g:SuperTabDefaultCompletionType
" set the current completion type to the default
call SuperTabSetCompletionType(b:SuperTabDefaultCompletionType)
endfunction " }}}
" s:ManualCompletionEnter() {{{
" Handles manual entrance into completion mode.
function! s:ManualCompletionEnter()
if &smd
echo '' | echohl ModeMsg | echo '-- ^X++ mode (' . s:modes . ')' | echohl None
endif
let complType = nr2char(getchar())
if stridx(s:types, complType) != -1
if stridx("/<c-e>/<c-y>", complType) != -1 " no memory, just scroll...
return "/<c-x>" . complType
elseif stridx('np', complType) != -1
let complType = nr2char(char2nr(complType) - 96)
else
let complType = "/<c-x>" . complType
endif
if index(['insert', 'session'], g:SuperTabRetainCompletionDuration) != -1
let b:complType = complType
endif
" Hack to workaround bug when invoking command line completion via <c-r>=
if complType == "/<c-x>/<c-v>"
return s:CommandLineCompletion()
endif
return complType
endif
echohl "Unknown mode"
return complType
endfunction " }}}
" s:SetCompletionType() {{{
" Sets the completion type based on what the user has chosen from the help
" buffer.
function! s:SetCompletionType()
let chosen = substitute(getline('.'), '.*|/(.*/)|.*', '/1', '')
if chosen != getline('.')
let winnr = b:winnr
close
exec winnr . 'winc w'
call SuperTabSetCompletionType(chosen)
endif
endfunction " }}}
" s:SetDefaultCompletionType() {{{
function! s:SetDefaultCompletionType()
if exists('b:SuperTabDefaultCompletionType') &&
/ (!exists('b:complCommandLine') || !b:complCommandLine)
call SuperTabSetCompletionType(b:SuperTabDefaultCompletionType)
endif
endfunction " }}}
" s:SuperTab(command) {{{
" Used to perform proper cycle navigation as the user requests the next or
" previous entry in a completion list, and determines whether or not to simply
" retain the normal usage of <tab> based on the cursor position.
function! s:SuperTab(command)
if s:WillComplete()
" rare case where no autocmds have fired for this buffer to initialize the
" supertab vars.
call s:InitBuffer()
let key = ''
" highlight first result if longest enabled
if g:SuperTabLongestHighlight && !pumvisible() && &completeopt =~ 'longest'
let key = (b:complType == "/<c-p>") ? "/<c-p>" : "/<c-n>"
endif
" exception: if in <c-p> mode, then <c-n> should move up the list, and
" <c-p> down the list.
if a:command == 'p' &&
/ (b:complType == "/<c-p>" ||
/ (b:complType == 'context' &&
/ tolower(g:SuperTabContextDefaultCompletionType) == '<c-p>'))
return "/<c-n>"
elseif a:command == 'p' &&
/ (b:complType == "/<c-n>" ||
/ (b:complType == 'context' &&
/ tolower(g:SuperTabContextDefaultCompletionType) == '<c-n>'))
return "/<c-p>"
endif
" handle 'context' completion.
if b:complType == 'context'
let complType = s:ContextCompletion()
if complType == ''
exec "let complType = /"" .
/ escape(g:SuperTabContextDefaultCompletionType, '<') . "/""
endif
return complType . key
endif
" Hack to workaround bug when invoking command line completion via <c-r>=
if b:complType == "/<c-x>/<c-v>"
return s:CommandLineCompletion()
endif
return b:complType . key
endif
return "/<tab>"
endfunction " }}}
" s:SuperTabHelp() {{{
" Opens a help window where the user can choose a completion type to enter.
function! s:SuperTabHelp()
let winnr = winnr()
if bufwinnr("SuperTabHelp") == -1
botright split SuperTabHelp
setlocal noswapfile
setlocal buftype=nowrite
setlocal bufhidden=delete
let saved = @"
let @" = s:tabHelp
silent put
call cursor(1, 1)
silent 1,delete
call cursor(4, 1)
let @" = saved
exec "resize " . line('$')
syntax match Special "|./{-}|"
setlocal readonly
setlocal nomodifiable
nmap <silent> <buffer> <cr> :call <SID>SetCompletionType()<cr>
nmap <silent> <buffer> <c-]> :call <SID>SetCompletionType()<cr>
else
exec bufwinnr("SuperTabHelp") . "winc w"
endif
let b:winnr = winnr
endfunction " }}}
" s:WillComplete() {{{
" Determines if completion should be kicked off at the current location.
function! s:WillComplete()
let line = getline('.')
let cnum = col('.')
" Start of line.
let prev_char = strpart(line, cnum - 2, 1)
if prev_char =~ '^/s*$'
return 0
endif
" Within a word, but user does not have mid word completion enabled.
let next_char = strpart(line, cnum - 1, 1)
if !g:SuperTabMidWordCompletion && next_char =~ '/k'
return 0
endif
" In keyword completion mode and no preceding word characters.
"if (b:complType == "/<c-n>" || b:complType == "/<c-p>") && prev_char !~ '/k'
" return 0
"endif
return 1
endfunction " }}}
" s:CommandLineCompletion() {{{
" Hack needed to account for apparent bug in vim command line mode completion
" when invoked via <c-r>=
function! s:CommandLineCompletion()
" This hack will trigger InsertLeave which will then invoke
" s:SetDefaultCompletionType. To prevent default completion from being
" restored prematurely, set an internal flag for s:SetDefaultCompletionType
" to check for.
let b:complCommandLine = 1
return "/<c-/>/<c-o>:call feedkeys('/<c-x>/<c-v>/<c-v>', 'n') | " .
/ "let b:complCommandLine = 0/<cr>"
endfunction " }}}
" s:ContextCompletion() {{{
function! s:ContextCompletion()
let contexts = exists('b:SuperTabCompletionContexts') ?
/ b:SuperTabCompletionContexts : g:SuperTabCompletionContexts
for context in contexts
try
let Context = function(context)
let complType = Context()
unlet Context
if type(complType) == 1 && complType != ''
return complType
endif
catch /E700/
echohl Error
echom 'supertab: no context function "' . context . '" found.'
echohl None
endtry
endfor
return ''
endfunction " }}}
" s:ContextDiscover() {{{
function! s:ContextDiscover()
let discovery = exists('g:SuperTabContextDiscoverDiscovery') ?
/ g:SuperTabContextDiscoverDiscovery : []
" loop through discovery list to find the default
if !empty(discovery)
for pair in discovery
let var = substitute(pair, '/(.*/):.*', '/1', '')
let type = substitute(pair, '.*:/(.*/)', '/1', '')
exec 'let value = ' . var
if value !~ '^/s*$' && value != '0'
exec "let complType = /"" . escape(type, '<') . "/""
return complType
endif
endfor
endif
endfunction " }}}
" s:ContextText() {{{
function! s:ContextText()
let exclusions = exists('g:SuperTabContextTextFileTypeExclusions') ?
/ g:SuperTabContextTextFileTypeExclusions : []
if index(exclusions, &ft) == -1
let curline = getline('.')
let cnum = col('.')
let synname = synIDattr(synID(line('.'), cnum - 1, 1), 'name')
if curline =~ '.*//w*/%' . cnum . 'c' ||
/ ((has('win32') || has('win64')) && curline =~ '.*///w*/%' . cnum . 'c')
return "/<c-x>/<c-f>"
elseif curline =~ '.*/(/w/|[/])]/)/(/./|::/|->/)/w*/%' . cnum . 'c' &&
/ synname !~ '/(String/|Comment/)'
let omniPrecedence = exists('g:SuperTabContextTextOmniPrecedence') ?
/ g:SuperTabContextTextOmniPrecedence : ['&completefunc', '&omnifunc']
for omniFunc in omniPrecedence
if omniFunc !~ '^&'
let omniFunc = '&' . omniFunc
endif
if getbufvar(bufnr('%'), omniFunc) != ''
return omniFunc == '&omnifunc' ? "/<c-x>/<c-o>" : "/<c-x>/<c-u>"
endif
endfor
endif
endif
endfunction " }}}
" Key Mappings {{{
" map a regular tab to ctrl-tab (note: doesn't work in console vim)
exec 'inoremap ' . g:SuperTabMappingTabLiteral . ' <tab>'
imap <c-x> <c-r>=<SID>ManualCompletionEnter()<cr>
" From the doc |insert.txt| improved
exec 'imap ' . g:SuperTabMappingForward . ' <c-n>'
exec 'imap ' . g:SuperTabMappingBackward . ' <c-p>'
" After hitting <Tab>, hitting it once more will go to next match
" (because in XIM mode <c-n> and <c-p> mappings are ignored)
" and wont start a brand new completion
" The side effect, that in the beginning of line <c-n> and <c-p> inserts a
" <Tab>, but I hope it may not be a problem...
inoremap <c-n> <c-r>=<SID>SuperTab('n')<cr>
inoremap <c-p> <c-r>=<SID>SuperTab('p')<cr>
" }}}
" Command Mappings {{{
if !exists(":SuperTabHelp")
command SuperTabHelp :call <SID>SuperTabHelp()
endif
" }}}
call s:Init()
let &cpo = s:save_cpo
" vim:ft=vim:fdm=marker
655
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
