http协议教程

1、HTTP Overview

HTTP stands for Hypertext Transfer Protocol. It is an TCP/IP based communication protocol which is used to deliver virtually all files and other data, collectively called resources, on the World Wide Web. These resources could be HTML files, image files, query results, or anything else.

A browser is works as an HTTP client because it sends requests to an HTTP server which is called Web server. The Web Server then sends responses back to the client. The standard and default port for HTTP servers to listen on is 80 but it can be changed to any other port like 8080 etc.

There are three important things about HTTP of which you should be aware:

• HTTP is connectionless: After a request is made, the client disconnects from the server and waits for a response. The server must re-establish the connection after it process the request.

• HTTP is media independent: Any type of data can be sent by HTTP as long as both the client and server know how to handle the data content. How content is handled is determined by the MIME specification.

• HTTP is stateless: This is a direct result of HTTP's being connectionless. The server and client are aware of each other only during a request. Afterwards, each forgets the other. For this reason neither the client nor the browser can retain information between different request across the web pages.

  Following diagram shows where HTTP Protocol fits in communication:
  

2、HTTP Message Structure

Like most network protocols, HTTP uses the client-server model: An HTTP client opens a connection and sends a request message to an HTTP server; the server then returns a response message, usually containing the resource that was requested. After delivering the response, the server closes the connection.

The format of the request and response messages are similar and will have following structure:

An initial line CRLF Zero or more header lines CRLF A blank line ie. a CRLF An optional message body like file, query data or query output.

Initial lines and headers should end in CRLF. Though you should gracefully handle lines ending in just LF. More exactly, CR and LF here mean ASCII values 13 and 10.

Initial Line : Request

The initial line is different for the request than for the response. A request line has three parts, separated by spaces:

• An HTTP Method Name

• The local path of the requested resource.

• The version of HTTP being used.

Here is an exampple of initial line for Request Message.

GET /path/to/file/index.html HTTP/1.0

• GET is the most common HTTP method. Other methods could be POST, HEAD etc.

• The path is the part of the URL after the host name. This path is also called the request Uniform Resource Identifier (URI). A URI is like a URL, but more general.

• The HTTP version always takes the form "HTTP/x.x", uppercase.

Initial Line : Response

The initial response line, called the status line, also has three parts separated by spaces:

• The version of HTTP being used.

• A response status code that gives the result of the request.

• An English reason phrase describing the status code.

Here is an exampple of initial line for Response Message.

HTTP/1.0 200 OK or HTTP/1.0 404 Not Found

Header Lines

Header lines provide information about the request or response, or about the object sent in the message body.

The header lines are in the usual text header format, which is: one line per header, of the form "Header-Name: value", ending with CRLF. It's the same format used for email and news postings, defined in RFC 822.

• A header line should end in CRLF, but you should handle LF correctly.

• The header name is not case-sensitive.

• Any number of spaces or tabs may be between the ":" and the value.

• Header lines beginning with space or tab are actually part of the previous header line, folded into multiple lines for easy reading.

Here is an exampple of ione header line

User-agent: Mozilla/3.0Gold or Last-Modified: Fri, 31 Dec 1999 23:59:59 GMT

The Message Body

An HTTP message may have a body of data sent after the header lines. In a response, this is where the requested resource is returned to the client (the most common use of the message body), or perhaps explanatory text if there's an error. In a request, this is where user-entered data or uploaded files are sent to the server.

If an HTTP message includes a body, there are usually header lines in the message that describe the body. In particular:

• The Content-Type: header gives the MIME-type of the data in the body, such astext/html or image/gif.

• The Content-Length: header gives the number of bytes in the body.

3、HTTP Header Fields

Header lines provide information about the request or response, or about the object sent in the message body. This section will list out all the header fields available in HTTP Version 1.0

Allow

The Allow entity-header field lists the set of methods supported by the resource identified by the Request-URI. The purpose of this field is strictly to inform the recipient of valid methods associated with the resource.

Example

Allow: GET, HEAD

Authorization

The Authorization field value consists of credentials containing the authentication information of the user agent for the realm of the resource being requested.

Example

Authorization : credentials

Content-Encoding

The Content-Encoding entity-header field is used as a modifier to the media-type. When present, its value indicates what additional content coding has been applied to the resource, and thus what decoding mechanism must be applied in order to obtain the media-type referenced by the Content-Type header field. The Content-Encoding is primarily used to allow a document to be compressed without losing the identity of its underlying media type.

Example

Content-Encoding: x-gzip

Content-Length

The Content-Length entity-header field indicates the size of the Entity-Body, in decimal number of octets, sent to the recipient or, in the case of the HEAD method, the size of the Entity-Body that would have been sent had the request been a GET.

Example

Content-Length: 3495

Content-Type

The Content-Type entity-header field indicates the media type of the Entity-Body sent to the recipient or, in the case of the HEAD method, the media type that would have been sent had the request been a GET.

Example

Content-Type: text/html

Date

The Date general-header field represents the date and time at which the message was originated, having the same semantics as orig-date in RFC 822.

Example

Date: Tue, 15 Nov 1994 08:12:31 GMT

Expires

The Expires entity-header field gives the date/time after which the entity should be considered stale. This allows information providers to suggest the volatility of the resource, or a date after which the information may no longer be valid.

Example

Expires: Thu, 01 Dec 1994 16:00:00 GMT

From

The From request-header field, if given, should contain an Internet e-mail address for the human user who controls the requesting user agent. The address should be machine-usable, as defined by mailbox in RFC 822.

Example

From: webmaster@w3.org

If-Modified-Since

The If-Modified-Since request-header field is used with the GET method to make it conditional: if the requested resource has not been modified since the time specified in this field, a copy of the resource will not be returned from the server; instead, a 304 (not modified) response will be returned without any Entity-Body.

Example

If-Modified-Since: Sat, 29 Oct 1994 19:43:31 GMT

Last-Modified

The Last-Modified entity-header field indicates the date and time at which the sender believes the resource was last modified.

Example

Last-Modified: Tue, 15 Nov 1994 12:45:26 GMT

Location

The Location response-header field defines the exact location of the resource that was identified by the Request-URI. For 3xx responses, the location must indicate the server's preferred URL for automatic redirection to the resource. Only one absolute URL is allowed.

Example

Location: http://www.w3.org/hypertext/WWW/NewLocation.html

Pragma

The Pragma general-header field is used to include implementation-specific directives that may apply to any recipient along the request/response chain. All pragma directives specify optional behavior from the viewpoint of the protocol; however, some systems may require that behavior be consistent with the directives.

Example

Pragma = "Pragma" ":" 1#pragma-directive

pragma-directive = "no-cache" | extension-pragma

extension-pragma = token [ "=" word ]

Referer

The Referer request-header field allows the client to specify, for the server's benefit, the address (URI) of the resource from which the Request-URI was obtained.

Example

Referer: http://www.w3.org/hypertext/DataSources/Overview.html

Server

The Server response-header field contains information about the software used by the origin server to handle the request. The field can contain multiple product tokens and comments identifying the server and any significant subproducts.

Example

Server: CERN/3.0 libwww/2.17

User-Agent

The User-Agent request-header field contains information about the user agent originating the request. This is for statistical purposes, the tracing of protocol violations, and automated recognition of user agents for the sake of tailoring responses to avoid particular user agent limitations.

Example

User-Agent: CERN-LineMode/2.15 libwww/2.17b3

WWW-Authenticate

The WWW-Authenticate response-header field must be included in 401 (unauthorized) response messages. The field value consists of at least one challenge that indicates the authentication scheme(s) and parameters applicable to the Request-URI.

Example

WWW-Authenticate = "WWW-Authenticate" ":" 1#challenge

4、HTTP Status Codes

This is a list of HTTP status messages that might be returned: 1xx: Information Message: Description: 100 Continue Only a part of the request has been received by the server, but as long as it has not been rejected, the client should continue with the request 101 Switching Protocols The server switches protocol 2xx: Successful Message: Description: 200 OK The request is OK 201 Created The request is complete, and a new resource is created  202 Accepted The request is accepted for processing, but the processing is not complete 203 Non-authoritative Information   204 No Content   205 Reset Content   206 Partial Content   3xx: Redirection Message: Description: 300 Multiple Choices A link list. The user can select a link and go to that location. Maximum five addresses   301 Moved Permanently The requested page has moved to a new url  302 Found The requested page has moved temporarily to a new url  303 See Other The requested page can be found under a different url  304 Not Modified   305 Use Proxy   306 Unused This code was used in a previous version. It is no longer used, but the code is reserved 307 Temporary Redirect The requested page has moved temporarily to a new url 4xx: Client Error Message: Description: 400 Bad Request The server did not understand the request 401 Unauthorized The requested page needs a username and a password 402 Payment Required You can not use this code yet 403 Forbidden Access is forbidden to the requested page 404 Not Found The server can not find the requested page 405 Method Not Allowed The method specified in the request is not allowed 406 Not Acceptable The server can only generate a response that is not accepted by the client 407 Proxy Authentication Required You must authenticate with a proxy server before this request can be served 408 Request Timeout The request took longer than the server was prepared to wait 409 Conflict The request could not be completed because of a conflict 410 Gone The requested page is no longer available  411 Length Required The "Content-Length" is not defined. The server will not accept the request without it  412 Precondition Failed The precondition given in the request evaluated to false by the server 413 Request Entity Too Large The server will not accept the request, because the request entity is too large 414 Request-url Too Long The server will not accept the request, because the url is too long. Occurs when you convert a "post" request to a "get" request with a long query information  415 Unsupported Media Type The server will not accept the request, because the media type is not supported  416    417 Expectation Failed   5xx: Server Error Message: Description: 500 Internal Server Error The request was not completed. The server met an unexpected condition 501 Not Implemented The request was not completed. The server did not support the functionality required 502 Bad Gateway The request was not completed. The server received an invalid response from the upstream server 503 Service Unavailable The request was not completed. The server is temporarily overloading or down 504 Gateway Timeout The gateway has timed out 505 HTTP Version Not Supported The server does not support the "http protocol" version

5、HTTP Message Example

To retrieve the file at the URL

http://www.somehost.com/path/file.html

first open a socket to the host www.somehost.com, port 80 (use the default port of 80 because none is specified in the URL). Then, send something like the following through the socket:

GET /path/file.html HTTP/1.0 From: someuser@tutorialspoint.com User-Agent: HTTPTool/1.0 [blank line here]

The server should respond with something like the following, sent back through the same socket:

HTTP/1.0 200 OK Date: Fri, 31 Dec 1999 23:59:59 GMT Content-Type: text/html Content-Length: 1354 <html> <body> <h1>Happy New Millennium!</h1> (more file contents) . . . </body> </html>

After sending the response, the server closes the socket.

To familiarize yourself with requests and responses, do manually experiment with HTTP using telnet.

Manually Experimenting with HTTP

Using telnet, you can open an interactive socket to an HTTP server. This lets you manually enter a request, and see the response written to your screen. It's a great help when learning HTTP, to see exactly how a server responds to a particular request. It also helps when troubleshooting.

From a Unix prompt, open a connection to an HTTP server with something like

telnet www.somehost.com 80

Then enter your request line by line, like

GET /path/file.html HTTP/1.0
[headers here, if any]
[blank line here]

After you finish your request with the blank line, you'll see the raw response from the server, including the status line, headers, and message body.