VLAN实验

最新推荐文章于 2024-11-11 16:34:31 发布

Lcbynro

最新推荐文章于 2024-11-11 16:34:31 发布

阅读量60

点赞数

文章标签：网络 Powered by 金山文档

本文链接：https://blog.csdn.net/Lcbynro/article/details/129110717

版权

该文详细描述了如何配置三个交换机sw1、sw2和sw3的VLAN设置，包括接入端口、Hybrid端口和Trunk端口的配置，以及VLAN2到VLAN6的标签处理规则。同时，配置了路由器r1的接口IP地址、VLAN子接口及DHCP服务，以提供两个不同网段的IP地址分配。

摘要由CSDN通过智能技术生成

先配置交换机sw1

[sw1]vlan batch  2 to 6
[sw1-Ethernet0/0/1]port link-type access 
[sw1-Ethernet0/0/1]port default vlan 2
[sw1-Ethernet0/0/2]port hybrid pvid vlan 3
[sw1-Ethernet0/0/2]port hybrid untagged vlan 3  to 6
[sw1-GigabitEthernet0/0/2]port link-type trunk 
[sw1-GigabitEthernet0/0/2]port trunk allow-pass vlan all

配置交换机sw2

[sw2]vlan batch 2 to 6
[sw2-Ethernet0/0/1]port link-type access 
[sw2]vlan batch 2 to 6
[sw2-Ethernet0/0/2]port hybrid pvid vlan 4
[sw2-Ethernet0/0/2]port hybrid untagged  vlan 3 to 5
[sw2-GigabitEthernet0/0/1]port link-type trunk
[sw2-GigabitEthernet0/0/1]port trunk allow-pass vlan all 
[sw2-GigabitEthernet0/0/2]port link-type trunk 
[sw2-GigabitEthernet0/0/2]port trunk allow-pass vlan  all

配置交换机sw3

[sw3]vlan batch 2 to 6
[sw3-Ethernet0/0/1]port hybrid pvid vlan 5
[sw3-Ethernet0/0/1]port hybrid untagged vlan 3 to 5
[sw3-Ethernet0/0/2]port hybrid pvid vlan 6
[sw3-Ethernet0/0/2]port hybrid untagged vlan 3 6
[sw3-GigabitEthernet0/0/2]port hybrid tagged vlan 2 to 6

完善该网络的规则

#vlan2可以带着标签访问r1
#valn3——vlan6需要脱下标签
[sw1-GigabitEthernet0/0/1]port hybrid tagged vlan 2
[sw1-GigabitEthernet0/0/1]port hybrid untagged vlan 3 to 6

#配置路由器
[r1-GigabitEthernet0/0/0]ip address 192.168.2.1 24
[r1-GigabitEthernet0/0/0.1]dot1q termination vid 2
[r1-GigabitEthernet0/0/0.1]arp broadcast enable 
#配置dhcp
[r1]ip pool a
[r1-ip-pool-a]network 192.168.1.0 ma 24
[r1-ip-pool-a]gateway-list 192.168.1.1
[r1]ip pool b  
[r1-ip-pool-b]network 192.168.2.0 mask 24   
[r1-ip-pool-b]gateway-list 192.168.2.1
[r1-GigabitEthernet0/0/0]dhcp select global 
[r1-GigabitEthernet0/0/0.1]dhcp select global

然后让所有pc端获取ip地址