BGP综合实验

1.配置IP地址

2、AS2中启动OSPF

[R2]ospf 1 router-id 2.2.2.2
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255 

[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1]area 0
[R3-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255
 
[R4]ospf 1 router-id 4.4.4.4
[R4-ospf-1]area 0
[R4-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255
 
[R5]ospf 1 router-id 5.5.5.5
[R5-ospf-1]area 0
[R5-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255
 
[R6]ospf 1 router-id 6.6.6.6
[R6-ospf-1]area 0
[R6-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255
 
[R7]ospf 1 router-id 7.7.7.7
[R7-ospf-1]area 0
[R7-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255

3.启动BGP协议

4.发布路由信息

5、破除水平分割

6.配置空接口破坏、汇总路由

7.建立GRE隧道

[R1]int t 0/0/0
[R1-Tunnel0/0/0]ip address 192.168.18.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre 
[R1-Tunnel0/0/0]source 10.0.0.1
[R1-Tunnel0/0/0]destination 11.0.0.1
[R1]ip route-static 192.168.2.0 24 192.168.18.2
[R8]int t 0/0/0
[R8-Tunnel0/0/0]ip address 192.168.18.2 24
[R8-Tunnel0/0/0]tunnel-protocol gre 
[R8-Tunnel0/0/0]source 11.0.0.1
[R8-Tunnel0/0/0]destination 10.0.0.1
[R8]ip route-static 192.168.1.0 24 192.168.18.1