centos7 squid 代理设置

实验环境：centos7.6，ip 10.2.7.100 ，squid 3.5.20，https 网站 https://10.2.20.150

1、安装 squid

yum install -y squid

2、配置 squid.conf

主要修改 3 个地方

注释掉 http_access deny all

添加 http_access allow all

修改端口 http_port 3030

[root@ansible002 ~]# cat /etc/squid/squid.conf
#
# Recommended minimum configuration:
#

# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 10.0.0.0/8	# RFC1918 possible internal network
acl localnet src 172.16.0.0/12	# RFC1918 possible internal network
acl localnet src 192.168.0.0/16	# RFC1918 possible internal network
acl localnet src fc00::/7       # RFC 4193 local private network range
acl localnet src fe80::/10      # RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443
acl Safe_ports port 80		# http
acl Safe_ports port 21		# ftp
acl Safe_ports port 443		# https
acl Safe_ports port 70		# gopher
acl Safe_ports port 210		# wais
acl Safe_ports port 1025-65535	# unregistered ports
acl Safe_ports port 280		# http-mgmt
acl Safe_ports port 488		# gss-http
acl Safe_ports port 591		# filemaker
acl Safe_ports port 777		# multiling http
acl CONNECT method CONNECT

#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
#http_access deny !Safe_ports

# Deny CONNECT to other than secure SSL ports
#http_access deny CONNECT !SSL_ports

# Only allow cachemgr access from localhost
#http_access allow localhost manager
#http_access deny manager

# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#

# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
#http_access allow localnet
#http_access allow localhost

# And finally deny all other access to this proxy
#http_access deny all
http_access allow all

# Squid normally listens to port 3128
http_port 3030

# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/spool/squid 100 16 256

# Leave coredumps in the first cache dir
coredump_dir /var/spool/squid

#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp:		1440	20%	10080
refresh_pattern ^gopher:	1440	0%	1440
refresh_pattern -i (/cgi-bin/|\?) 0	0%	0
refresh_pattern .		0	20%	4320

3、启动 squid

systemctl start squid

4、关闭防火墙（或者开启端口 3030），

systemctl stop firewalld

5、验证

curl -x http://10.2.7.100:3030 https://10.2.20.150

6、如果需要设置代理用户密码

参考文章 使用Squid搭建CentOS7代理服务器上网