ROS2 驱动思岚G4雷达（ydlidar）- Rviz显示

记录G4雷达的配置

---

系统环境为：Ubuntu22.04

配置步骤

1、安装雷达SDK
2、构建 G4 雷达 ROS2 项目工程文件
3、使用Rviz可视化界面显示

---

1、安装雷达SDK

1.1 安装CMake

YDLidar SDK需要CMake 2.8.2+作为依赖项

• Ubuntu 18.04或者Ubuntu 22.04

sudo apt install cmake pkg-config

如果使用python API，您需要安装python和swig（3.0或更高版本）

sudo apt-get install python swig
sudo apt-get install python-pip

1.2 构建YDLidar SDK

在YDLidar SDK目录中，运行以下命令来编译项目：

git clone https://github.com/YDLIDAR/YDLidar-SDK.git
cd YDLidar-SDK/build
cmake ..
make
sudo make install

注意：如果已经安装了python和swig，sudo make install命令也将安装python API，而无需执行以下操作，在这里建议大家还是使用一次 sudo make install 确认安装成功

至此，若在编译过程中未出现错误，即为SDK安装成功

2、构建 G4 雷达 ROS2 项目工程文件

2.1 编译和安装YDLidar SDK

ydlidar_ros2_driver依赖于ydlidar SDK库。如果从未安装过YDLidar SDK库，则必须首先安装YDLidar SDK库，具体的可以参考上一点：

2.2 Cylinder_ros2_driver克隆

（1）为github克隆ydlidar_ros2_driver包：

git clone https://github.com/YDLIDAR/ydlidar_ros2_driver.git ydlidar_ros2_ws/src/ydlidar_ros2_driver

（2）构建ydlidar_ros2_driver包

cd ydlidar_ros2_ws
colcon build --symlink-install

（3）程序包环境设置：
将工作空间添加到环境变量里面

source ./install/setup.bash

同样可以使用比较长久的方法：

echo "source ~/ydlidar_ros2_ws/install/setup.bash" >> ~/.bashrc
source ~/.bashrc

在这里 “~/ydlidar_ros2_ws/install/setup.bash路径要对应上自己的工作空间当中的setup.bash位置。

（4）确认要确认包路径已设置，请打印grep-i ROS变量

printenv | grep -i ROS

应该看到类似的内容：OLDPWD=/home/tony/ydlidar_ros2_ws/install
（5）创建串行端口别名[可选]

sudo chmod 0777 src/ydlidar_ros2_driver/startup/*
sudo sh src/ydlidar_ros2_driver/startup/initenv.sh

3、使用Rviz可视化界面显示

使用启动文件运行ydlidar_ros2_driver

3.1 运行雷达启动launch文件

ros2 launch ydlidar_ros2_driver ydlidar_launch.py 

或者

ros2 launch $(ros2 pkg prefix ydlidar_ros2_driver)/share/ydlidar_ros2_driver/launch/ydlidar.py 

3.2运行可视化界面

如果想要运行可视化界面的话可以使用一下命令，单独在终端里运行即可

ros2 launch ydlidar_ros2_driver ydlidar_launch_view.py 

3、查看一下雷达扫描话题信息

ros2 run ydlidar_ros2_driver ydlidar_ros2_driver_client or ros2 topic echo /scan

问题解决

1、launch文件修改

在编译过程当中，出现了ydlidar_launch_view.py文件或者ydlidar_launch.py文件中的
[ERROR] [launch]: Caught exception in launch LifecycleNode: __init__() missing 1 required keyword-only argument: 'node_executable'
这样的错误警告，将两个文件当中含有node_[后缀名称]更改为[后缀名称即可]
例如，在本次报错当中，需要将LifecycleNode这个节点的node_executable更改为executable即可，其他的node_name同样的更改为 name

#!/usr/bin/python3
# Copyright 2020, EAIBOT
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

from ament_index_python.packages import get_package_share_directory

from launch import LaunchDescription
from launch_ros.actions import LifecycleNode
from launch_ros.actions import Node
from launch.actions import DeclareLaunchArgument
from launch.substitutions import LaunchConfiguration
from launch.actions import LogInfo

import lifecycle_msgs.msg
import os


def generate_launch_description():
    share_dir = get_package_share_directory('ydlidar_ros2_driver')
    rviz_config_file = os.path.join(share_dir, 'config','ydlidar.rviz')
    parameter_file = LaunchConfiguration('params_file')
    # node_name = 'ydlidar_ros2_driver_node'

    params_declare = DeclareLaunchArgument('params_file',
                                           default_value=os.path.join(
                                               share_dir, 'params', 'ydlidar.yaml'),
                                           description='FPath to the ROS2 parameters file to use.')

    driver_node = LifecycleNode(package='ydlidar_ros2_driver',
                                executable='ydlidar_ros2_driver_node',
                                name='ydlidar_ros2_driver_node',
                                output='screen',
                                emulate_tty=True,
                                parameters=[parameter_file],
                                namespace='/',
                                )
    tf2_node = Node(package='tf2_ros',
                    executable='static_transform_publisher',
                    name='static_tf_pub_laser',
                    arguments=['0', '0', '0.02','0', '0', '0', '1','base_link','laser_frame'],
                    )
    rviz2_node = Node(package='rviz2',
                    executable='rviz2',
                    name='rviz2',
                    arguments=['-d', rviz_config_file],
                    )

    return LaunchDescription([
        params_declare,
        driver_node,
        tf2_node,
        rviz2_node,
    ])

上图对应的是 "ydlidar_launch_view.py"文件，然后ydlidar_launch.py文件中对应的两个参数，也就是node_executable和node_name 两个变量名字做出修改，修改后如下代码所示：

#!/usr/bin/python3
# Copyright 2020, EAIBOT
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

from ament_index_python.packages import get_package_share_directory

from launch import LaunchDescription
from launch_ros.actions import LifecycleNode
from launch_ros.actions import Node
from launch.actions import DeclareLaunchArgument
from launch.substitutions import LaunchConfiguration
from launch.actions import LogInfo

import lifecycle_msgs.msg
import os


def generate_launch_description():
    share_dir = get_package_share_directory('ydlidar_ros2_driver')
    parameter_file = LaunchConfiguration('params_file')
    # node_name = 'ydlidar_ros2_driver_node'

    params_declare = DeclareLaunchArgument('params_file',
                                           default_value=os.path.join(
                                               share_dir, 'params', 'ydlidar.yaml'),
                                           description='FPath to the ROS2 parameters file to use.')

    driver_node = LifecycleNode(package='ydlidar_ros2_driver',
                                executable='ydlidar_ros2_driver_node',
                                name='ydlidar_ros2_driver_node',
                                output='screen',
                                emulate_tty=True,
                                parameters=[parameter_file],
                                namespace='/',
                                )
    tf2_node = Node(package='tf2_ros',
                    executable='static_transform_publisher',
                    name='static_tf_pub_laser',
                    arguments=['0', '0', '0.02','0', '0', '0', '1','base_link','laser_frame'],
                    )

    return LaunchDescription([
        params_declare,
        driver_node,
        tf2_node,
    ])

建议使用 vscode 编辑器对文本进行更改，以便可以重复撤回和更加便携式的文本切换

2、如果出现node节点链接错误

然后就是在编译过程（colcon build --symlink-install）中，如果出现node节点链接错误的情况，需要更改当前目录下的
ydlidar_ros2_driver/src/ydlidar_ros2_driver_node.cpp 这个文件内容（直接复制替换即可）

/*
 *  YDLIDAR SYSTEM
 *  YDLIDAR ROS 2 Node
 *
 *  Copyright 2017 - 2020 EAI TEAM
 *  http://www.eaibot.com
 *
 */

/* Modified for Humble by @lghrainbow  10/2022 */

#ifdef _MSC_VER
#ifndef _USE_MATH_DEFINES
#define _USE_MATH_DEFINES
#endif
#endif

#include "src/CYdLidar.h"
#include <math.h>
#include <chrono>
#include <iostream>
#include <memory>

#include "rclcpp/clock.hpp"
#include "rclcpp/rclcpp.hpp"
#include "rclcpp/time_source.hpp"
#include "sensor_msgs/msg/laser_scan.hpp"
#include "std_srvs/srv/empty.hpp"
#include <vector>
#include <iostream>
#include <string>
#include <signal.h>

#define ROS2Verision "1.0.2"   /* 1.0.1 modified */


int main(int argc, char *argv[]) {
  rclcpp::init(argc, argv);

  auto node = rclcpp::Node::make_shared("ydlidar_ros2_driver_node");

  RCLCPP_INFO(node->get_logger(), "[YDLIDAR INFO] Current ROS Driver Version: %s\n", ((std::string)ROS2Verision).c_str());

  CYdLidar laser;
  std::string str_optvalue = "/dev/ydlidar";
  node->declare_parameter<std::string>("port");
  node->get_parameter("port", str_optvalue);
  ///lidar port
  laser.setlidaropt(LidarPropSerialPort, str_optvalue.c_str(), str_optvalue.size());

  ///ignore array
  str_optvalue = "";
  node->declare_parameter<std::string>("ignore_array");
  node->get_parameter("ignore_array", str_optvalue);
  laser.setlidaropt(LidarPropIgnoreArray, str_optvalue.c_str(), str_optvalue.size());

  std::string frame_id = "laser_frame";
  node->declare_parameter<std::string>("frame_id");
  node->get_parameter("frame_id", frame_id);

  //int property/
  /// lidar baudrate
  int optval = 230400;
  node->declare_parameter<int>("baudrate");
  node->get_parameter("baudrate", optval);
  laser.setlidaropt(LidarPropSerialBaudrate, &optval, sizeof(int));
  /// tof lidar
  optval = TYPE_TRIANGLE;
  node->declare_parameter<int>("lidar_type");
  node->get_parameter("lidar_type", optval);
  laser.setlidaropt(LidarPropLidarType, &optval, sizeof(int));
  /// device type
  optval = YDLIDAR_TYPE_SERIAL;
  node->declare_parameter<int>("device_type");
  node->get_parameter("device_type", optval);
  laser.setlidaropt(LidarPropDeviceType, &optval, sizeof(int));
  /// sample rate
  optval = 9;
  node->declare_parameter<int>("sample_rate");
  node->get_parameter("sample_rate", optval);
  laser.setlidaropt(LidarPropSampleRate, &optval, sizeof(int));
  /// abnormal count
  optval = 4;
  node->declare_parameter<int>("abnormal_check_count");
  node->get_parameter("abnormal_check_count", optval);
  laser.setlidaropt(LidarPropAbnormalCheckCount, &optval, sizeof(int));
     

  //bool property/
  /// fixed angle resolution
  bool b_optvalue = false;
  node->declare_parameter<bool>("fixed_resolution");
  node->get_parameter("fixed_resolution", b_optvalue);
  laser.setlidaropt(LidarPropFixedResolution, &b_optvalue, sizeof(bool));
  /// rotate 180
  b_optvalue = true;
  node->declare_parameter<bool>("reversion");
  node->get_parameter("reversion", b_optvalue);
  laser.setlidaropt(LidarPropReversion, &b_optvalue, sizeof(bool));
  /// Counterclockwise
  b_optvalue = true;
  node->declare_parameter<bool>("inverted");
  node->get_parameter("inverted", b_optvalue);
  laser.setlidaropt(LidarPropInverted, &b_optvalue, sizeof(bool));
  b_optvalue = true;
  node->declare_parameter<bool>("auto_reconnect");
  node->get_parameter("auto_reconnect", b_optvalue);
  laser.setlidaropt(LidarPropAutoReconnect, &b_optvalue, sizeof(bool));
  /// one-way communication
  b_optvalue = false;
  node->declare_parameter<bool>("isSingleChannel");
  node->get_parameter("isSingleChannel", b_optvalue);
  laser.setlidaropt(LidarPropSingleChannel, &b_optvalue, sizeof(bool));
  /// intensity
  b_optvalue = false;
  node->declare_parameter<bool>("intensity");
  node->get_parameter("intensity", b_optvalue);
  laser.setlidaropt(LidarPropIntenstiy, &b_optvalue, sizeof(bool));
  /// Motor DTR
  b_optvalue = false;
  node->declare_parameter<bool>("support_motor_dtr");
  node->get_parameter("support_motor_dtr", b_optvalue);
  laser.setlidaropt(LidarPropSupportMotorDtrCtrl, &b_optvalue, sizeof(bool));

  //float property/
  /// unit: °
  float f_optvalue = 180.0f;
  node->declare_parameter<float>("angle_max");
  node->get_parameter("angle_max", f_optvalue);
  laser.setlidaropt(LidarPropMaxAngle, &f_optvalue, sizeof(float));
  f_optvalue = -180.0f;
  node->declare_parameter<float>("angle_min");
  node->get_parameter("angle_min", f_optvalue);
  laser.setlidaropt(LidarPropMinAngle, &f_optvalue, sizeof(float));
  /// unit: m
  f_optvalue = 64.f;
  node->declare_parameter<float>("range_max");
  node->get_parameter("range_max", f_optvalue);
  laser.setlidaropt(LidarPropMaxRange, &f_optvalue, sizeof(float));
  f_optvalue = 0.1f;
  node->declare_parameter<float>("range_min");
  node->get_parameter("range_min", f_optvalue);
  laser.setlidaropt(LidarPropMinRange, &f_optvalue, sizeof(float));
  /// unit: Hz
  f_optvalue = 10.f;
  node->declare_parameter<float>("frequency");
  node->get_parameter("frequency", f_optvalue);
  laser.setlidaropt(LidarPropScanFrequency, &f_optvalue, sizeof(float));

  bool invalid_range_is_inf = false;
  node->declare_parameter<bool>("invalid_range_is_inf");
  node->get_parameter("invalid_range_is_inf", invalid_range_is_inf);


  bool ret = laser.initialize();
  if (ret) {
    ret = laser.turnOn();
  } else {
    RCLCPP_ERROR(node->get_logger(), "%s\n", laser.DescribeError());
  }
  
  auto laser_pub = node->create_publisher<sensor_msgs::msg::LaserScan>("scan", rclcpp::QoS(rclcpp::SensorDataQoS()));

  auto stop_scan_service =
    [&laser](const std::shared_ptr<rmw_request_id_t> request_header,
  const std::shared_ptr<std_srvs::srv::Empty::Request> req,
  std::shared_ptr<std_srvs::srv::Empty::Response> response) -> bool
  {
    return laser.turnOff();
  };

  auto stop_service = node->create_service<std_srvs::srv::Empty>("stop_scan",stop_scan_service);

  auto start_scan_service =
    [&laser](const std::shared_ptr<rmw_request_id_t> request_header,
  const std::shared_ptr<std_srvs::srv::Empty::Request> req,
  std::shared_ptr<std_srvs::srv::Empty::Response> response) -> bool
  {
    return laser.turnOn();
  };

  auto start_service = node->create_service<std_srvs::srv::Empty>("start_scan",start_scan_service);

  rclcpp::WallRate loop_rate(20);

  while (ret && rclcpp::ok()) {

    LaserScan scan;//

    if (laser.doProcessSimple(scan)) {

      auto scan_msg = std::make_shared<sensor_msgs::msg::LaserScan>();

      scan_msg->header.stamp.sec = RCL_NS_TO_S(scan.stamp);
      scan_msg->header.stamp.nanosec =  scan.stamp - RCL_S_TO_NS(scan_msg->header.stamp.sec);
      scan_msg->header.frame_id = frame_id;
      scan_msg->angle_min = scan.config.min_angle;
      scan_msg->angle_max = scan.config.max_angle;
      scan_msg->angle_increment = scan.config.angle_increment;
      scan_msg->scan_time = scan.config.scan_time;
      scan_msg->time_increment = scan.config.time_increment;
      scan_msg->range_min = scan.config.min_range;
      scan_msg->range_max = scan.config.max_range;
      
      int size = (scan.config.max_angle - scan.config.min_angle)/ scan.config.angle_increment + 1;
      scan_msg->ranges.resize(size);
      scan_msg->intensities.resize(size);
      for(size_t i=0; i < scan.points.size(); i++) {
        int index = std::ceil((scan.points[i].angle - scan.config.min_angle)/scan.config.angle_increment);
        if(index >=0 && index < size) {
          scan_msg->ranges[index] = scan.points[i].range;
          scan_msg->intensities[index] = scan.points[i].intensity;
        }
      }

      laser_pub->publish(*scan_msg);


    } else {
      RCLCPP_ERROR(node->get_logger(), "Failed to get scan");
    }
    if(!rclcpp::ok()) {
      break;
    }
    rclcpp::spin_some(node);
    loop_rate.sleep();
  }


  RCLCPP_INFO(node->get_logger(), "[YDLIDAR INFO] Now YDLIDAR is stopping .......");
  laser.turnOff();
  laser.disconnecting();
  rclcpp::shutdown();

  return 0;
}

---

🌸🌸🌸完结撒花🌸🌸🌸

---

🌈🌈Redamancy🌈🌈

---