网络工程笔记

access接口和trunk接口

1.pc配置ip
2.划分vlan
3.交换机配置
[Huawei]vlan batch 10 20

[Huawei]interface GigabitEthernet 0/0/1      //交换机之间
[Huawei-GigabitEthernet0/0/1]port link-type trunk
[Huawei-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20   //所有vlan

[Huawei]interface Ethernet0/0/1            //交换机与PC之间
[Huawei-Ethernet0/0/1]port link-type access
[Huawei-Ethernet0/0/1]port default vlan 10

hybrid接口

1.pc配置ip
2.划分vlan
3.交换机配置
[Huawei]vlan batch 10 20 100

[Huawei]interface GigabitEthernet 0/0/1    //交换机之间
[Huawei-GigabitEthernet0/0/1]port link-type hybrid
[Huawei-GigabitEthernet0/0/1]port hybrid tagged vlan 10 20 100  //所有vlan

[Huawei]interface Ethernet0/0/1				//交换机与PC之间
[Huawei-Ethernet0/0/1]port link-type hybrid
[Huawei-Ethernet0/0/1]port hybrid pvid vlan 20   //信息vlan 20可以进入交换机
[Huawei-Ethernet0/0/1]port hybrid untagged vlan 20 100 //信息vlan 20 100可以出去交换机

单臂路由实现VLAN间通信

1.pc配置ip
2.划分vlan
3.单臂路由配置


//在路由上配置子路由，有几个vlan配置几个
[Huawei]interface GigabitEthernet 0/0/0.1            
[Huawei-GigabitEthernet0/0/0.1]ip address 192.168.1.254 24
[Huawei-GigabitEthernet0/0/0.1]dot1q termination vid 10
[Huawei-GigabitEthernet0/0/0.1]arp broadcast enable 

[Huawei]interface GigabitEthernet 0/0/0.2
[Huawei-GigabitEthernet0/0