PL3366C

Product Description
PL3366C is a high efficiency Primary Side Regulator and highly integrated PWM Power Switch for AC/DC power supply applications. PL3366C It simplifies conventional CC/CV charger/adaptor designs by eliminating the opto-coupler and secondary control circuitry. Constant output voltage and current regulation is realized .
Multi-mode operations are utilized to achieve low standby power, high efficiency and audio & noise free. PL3366C operates in PFM mode at large load condition, with the load becomes medium or light, the chip operates in Green mode to achieve high efficiency.
PL3366C also offers rich protection features including Cycle-by-Cycle peak current limiting, UVLO, OTP, load OVP, and VDD over voltage.

 

Key Features
• Built-in Integrated Power BJT
• Accurate Constant Current Regulation at Universal AC input
• Eliminates Opto-coupler and all Secondary CC/CV Control Circuitry
• Built-in Line Compensation for Tighter CC/CV Regulation
• Built-in Compensation for
Transformer Inductance Tolerances
• Adjustable Output Cable Compensation
• Adaptive Multi-mode PFM Control for Improving Efficiency
• Low Start-up Current
• Built-in Leading Edge Blanking (LEB)
• Cycle-by-Cycle Current Limiting
• VDD Under Voltage Lockout and VDD over voltage protection
• Built-in Short Circuit Protection and Output Overvoltage Protection
• Over temperature protection
Applications
AC/DC power supply applications
• Cell Phone Charger
• Small Power Adaptor/Charger
• LED Driver
• Standby Supply for Consumer Electronics

Application Notes
PL3366C provides a very effective solution for low power adaptor/charger applications. The innovative CV and CC control can remove the need for secondary feedback circuitry while achieving excellent CC/CV performance and meeting very strict requirements.
   Startup & Operating Current
PL3366C has very slight startup current , thus the larger value startup resistor and smaller VDD capacitor can be used to minimize the power loss in application. The operating current of PL3366C is also very low. Together with PFM control features we could get high efficiency especially in light load.
   Under Voltage Lockout (UVLO)
An UVLO detector is implemented in it to detect the voltage on the VDD pin. It would assure the supply voltage enough to turn on the PWM controller and further to drive the power BJT. a hysteresis is built in to prevent the shutdown from the voltage dip during startup. The turn-on and turn-off threshold level are set at 15 V and 4.5 V, typically.