Hi8155 is a synchronous rectifier for switch mode power supplies,which combines an N-Channel MOSFET and a driver circuit designed for synchronous rectification in DCM ,QR and CCM operation. The synchronous rectification can effectively reduce the secondary side rectifier power dissipation and provide high performance solution. By sensing MOSFET SW-to-source voltage, Hi8155 can output ideal drive signal with less external components. It can provide high performance solution for 5V output voltage application. HI8155
Operation
The Hi8155 supports operation in CCM, DCM and Quasi-Resonant topologies. Operating in either a DCM or Quasi-Resonant topology, the control circuitry controls the gate in forward mode and will turn the gate off when the MOSFET current is fairly low. In CCM operation, the control circuitry turns off the gate when very fast transients occur.
VCC Under voltage lockout(UVLO)
When the Vcc is below UVLO threshold, the part is in sleep mode and the internal N-MOS will be turn off.
Turn ON phase HI8155
When the synchronous MOSFET is conducting, current will flow through its body diode which generates a negative Vds across it. Because this body diode voltage drop is much smaller than the turn on threshold of the control circuitry (-170mV), which will then turn on the N-MOS(60V 10mR).