Hi8155 耐压60V3.5A同步整流

Hi8155 is a synchronous rectifier for switch mode power supplies,which combines an N-Channel MOSFET and a driver circuit designed for synchronous rectification in DCM ,QR and CCM operation. The HI8155 synchronous rectification can effectively reduce the secondary side rectifier power dissipation and provide high performance solution. By sensing MOSFET SW-to-source voltage, Hi8155 can output ideal drive signal with less external components. Hi8155 can provide high performance solution for 5V output voltage application.

Hi8155 Turn ON phase
When the synchronous MOSFET is conducting, current will flow through its body diode which generates a negative Vds across it. Because this body diode voltage drop is much smaller than the turn on threshold of the control circuitry (-170mV), which will then turn on the
N-MOS.
Hi8155 ConductingPhase 
When the synchronous N-MOS is turned on, Vds becomes to rise according to its on resistance, as the current become smaller Vds rises above the Driver Voltage Regulator (-37mV), the circuitry starts pulling down the gate driver which leads to the VDS be regulated to a fixed voltage (the internal reference).
Hi8155 Turn OFF phase 
When the Vds rises to trigger the turn off threshold(-20mV), the N-MOS gate voltage is pulled to low after about 30nS delay by the control circuitry, a 1.7uS blanking time is added after the synchronous N-MOS is turn off to avoid error trigger because of the ringing.
 Hi8155: 60V 3.5A;  Hi8153: 60V3A;  Hi8223 :100V 3A.