Ceph集群报错解决方案笔记

最新推荐文章于 2024-06-25 16:40:51 发布

SL_World

最新推荐文章于 2024-06-25 16:40:51 发布

阅读量2.6w

点赞数 5

分类专栏： Ceph 文章标签： ceph

本文链接：https://blog.csdn.net/SL_World/article/details/84584366

版权

Ceph 专栏收录该内容

6 篇文章 0 订阅

订阅专栏

文章目录

0 当前Ceph版本和CentOS版本：
1.节点间配置文件内容不一致错误
2.too few PGs per OSD (21 < min 30)警告
- 解决办法：增加pg数
3.集群状态是`HEALTH_WARN application not enabled on 1 pool(s)`
4.删除存储池报错
5.集群节点宕机后恢复节点排错
- **解决方法：**
- **解决方法：**
6.卸载CephFS后再挂载时报错
- 总结：

0 当前Ceph版本和CentOS版本：

[root@ceph1 ceph]# ceph -v
ceph version 13.2.2 (02899bfda814146b021136e9d8e80eba494e1126) mimic (stable)
[root@ceph1 ceph]# cat /etc/redhat-release 
CentOS Linux release 7.5.1804 (Core)

1.节点间配置文件内容不一致错误

输入ceph-deploy mon create-initial命令获取密钥key，会在当前目录(如我的是~/etc/ceph/)下生成几个key，但报错如下。意思是：就是配置失败的两个结点的配置文件的内容于当前节点不一致，提示使用--overwrite-conf参数去覆盖不一致的配置文件。

[root@ceph1 ceph]# ceph-deploy mon create-initial
...
[ceph2][DEBUG ] remote hostname: ceph2
[ceph2][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[ceph_deploy.mon][ERROR ] RuntimeError: config file /etc/ceph/ceph.conf exists with different content; use --overwrite-conf to overwrite
[ceph_deploy][ERROR ] GenericError: Failed to create 2 monitors
...

输入命令如下(此处我共配置了三个结点ceph1~3)：

[root@ceph1 ceph]# ceph-deploy --overwrite-conf mon create ceph{3,1,2}
...
[ceph2][DEBUG ] remote hostname: ceph2
[ceph2][DEBUG ] write cluster configuration to /etc/ceph/{cluster}.conf
[ceph2][DEBUG ] create the mon path if it does not exist
[ceph2][DEBUG ] checking for done path: /var/lib/ceph/mon/ceph-ceph2/done
...

之后配置成功，可继续进行初始化磁盘操作。

2.too few PGs per OSD (21 < min 30)警告

[root@ceph1 ceph]# ceph -s
  cluster:
    id:     8e2248e4-3bb0-4b62-ba93-f597b1a3bd40
    health: HEALTH_WARN
            too few PGs per OSD (21 < min 30)
 
  services:
    mon: 3 daemons, quorum ceph2,ceph1,ceph3
    mgr: ceph2(active), standbys: ceph1, ceph3
    osd: 3 osds: 3 up, 3 in
    rgw: 1 daemon active
 
  data:
    pools:   4 pools, 32 pgs
    objects: 219  objects, 1.1 KiB
    usage:   3.0 GiB used, 245 GiB / 248 GiB avail
    pgs:     32 active+clean

从上面集群状态信息可查，每个osd上的pg数量=21<最小的数目30个。pgs为32，因为我之前设置的是2副本的配置，所以当有3个osd的时候，每个osd上均分了32÷3*2=21个pgs,也就是出现了如上的错误小于最小配置30个。
集群这种状态如果进行数据的存储和操作，会发现集群卡死，无法响应io，同时会导致大面积的osd down。

解决办法：增加pg数

因为我的一个pool有8个pgs，所以我需要增加两个pool才能满足osd上的pg数量=48÷3*2=32>最小的数目30。

[root@ceph1 ceph]# ceph osd pool create mytest 8
pool 'mytest' created
[root@ceph1 ceph]# ceph osd pool create mytest1 8
pool 'mytest1' created
[root@ceph1 ceph]# ceph -s
  cluster:
    id:     8e2248e4-3bb0-4b62-ba93-f597b1a3bd40
    health: HEALTH_OK
 
  services:
    mon: 3 daemons, quorum ceph2,ceph1,ceph3
    mgr: ceph2(active), standbys: ceph1, ceph3
    osd: 3 osds: 3 up, 3 in
    rgw: 1 daemon active
 
  data:
    pools:   6 pools, 48 pgs
    objects: 219  objects, 1.1 KiB
    usage:   3.0 GiB used, 245 GiB / 248 GiB avail
    pgs:     48 active+clean

集群健康状态显示正常。

3.集群状态是`HEALTH_WARN application not enabled on 1 pool(s)`

如果此时，查看集群状态是HEALTH_WARN application not enabled on 1 pool(s)：

[root@ceph1 ceph]# ceph -s
  cluster:
    id:     13430f9a-ce0d-4d17-a215-272890f47f28
    health: HEALTH_WARN
            application not enabled on 1 pool(s)

[root@ceph1 ceph]# ceph health detail
HEALTH_WARN application not enabled on 1 pool(s)
POOL_APP_NOT_ENABLED application not enabled on 1 pool(s)
    application not enabled on pool 'mytest'
    use 'ceph osd pool application enable <pool-name> <app-name>', where <app-name> is 'cephfs', 'rbd', 'rgw', or freeform for custom applications.

运行ceph health detail命令发现是新加入的存储池mytest没有被应用程序标记，因为之前添加的是RGW实例，所以此处依提示将mytest被rgw标记即可：

[root@ceph1 ceph]# ceph osd pool application enable mytest rgw
enabled application 'rgw' on pool 'mytest'

再次查看集群状态发现恢复正常

[root@ceph1 ceph]# ceph health
HEALTH_OK

4.删除存储池报错

以下以删除mytest存储池为例，运行ceph osd pool rm mytest命令报错，显示需要在原命令的pool名字后再写一遍该pool名字并最后加上--yes-i-really-really-mean-it参数

[root@ceph1 ceph]# ceph osd pool rm mytest
Error EPERM: WARNING: this will *PERMANENTLY DESTROY* all data stored in pool mytest.  If you are *ABSOLUTELY CERTAIN* that is what you want, pass the pool name *twice*, followed by --yes-i-really-really-mean-it.

按照提示要求复写pool名字后加上提示参数如下，继续报错：

[root@ceph1 ceph]# ceph osd pool rm mytest mytest --yes-i-really-really-mean-it
Error EPERM: pool deletion is disabled; you must first set the 
mon_allow_pool_delete config option to true before you can destroy a pool

错误信息显示，删除存储池操作被禁止，应该在删除前现在ceph.conf配置文件中增加mon_allow_pool_delete选项并设置为true。所以分别登录到每一个节点并修改每一个节点的配置文件。操作如下：

[root@ceph1 ceph]# vi ceph.conf 
[root@ceph1 ceph]# systemctl restart ceph-mon.target

在ceph.conf配置文件底部加入如下参数并设置为true，保存退出后使用systemctl restart ceph-mon.target命令重启服务。

[mon]
mon allow pool delete = true

其余节点操作同理。

[root@ceph2 ceph]# vi ceph.conf 
[root@ceph2 ceph]# systemctl restart ceph-mon.target
[root@ceph3 ceph]# vi ceph.conf 
[root@ceph3 ceph]# systemctl restart ceph-mon.target

再次删除，即成功删除mytest存储池。

[root@ceph1 ceph]# ceph osd pool rm mytest mytest --yes-i-really-really-mean-it
pool 'mytest' removed

5.集群节点宕机后恢复节点排错

笔者将ceph集群中的三个节点分别关机并重启后，查看ceph集群状态如下：

[root@ceph1 ~]# ceph -s
  cluster:
    id:     13430f9a-ce0d-4d17-a215-272890f47f28
    health: HEALTH_WARN
            1 MDSs report slow metadata IOs
            324/702 objects misplaced (46.154%)
            Reduced data availability: 126 pgs inactive
            Degraded data redundancy: 144/702 objects degraded (20.513%), 3 pgs degraded, 126 pgs undersized
 
  services:
    mon: 3 daemons, quorum ceph2,ceph1,ceph3
    mgr: ceph1(active), standbys: ceph2, ceph3
    mds: cephfs-1/1/1 up  {0=ceph1=up:creating}
    osd: 3 osds: 3 up, 3 in; 162 remapped pgs
 
  data:
    pools:   8 pools, 288 pgs
    objects: 234  objects, 2.8 KiB
    usage:   3.0 GiB used, 245 GiB / 248 GiB avail
    pgs:     43.750% pgs not active
             144/702 objects degraded (20.513%)
             324/702 objects misplaced (46.154%)
             162 active+clean+remapped
             123 undersized+peered
             3   undersized+degraded+peered

查看

[root@ceph1 ~]# ceph health detail
HEALTH_WARN 1 MDSs report slow metadata IOs; 324/702 objects misplaced (46.154%); Reduced data availability: 126 pgs inactive; Degraded data redundancy: 144/702 objects degraded (20.513%), 3 pgs degraded, 126 pgs undersized
MDS_SLOW_METADATA_IO 1 MDSs report slow metadata IOs
    mdsceph1(mds.0): 9 slow metadata IOs are blocked > 30 secs, oldest blocked for 42075 secs
OBJECT_MISPLACED 324/702 objects misplaced (46.154%)
PG_AVAILABILITY Reduced data availability: 126 pgs inactive
    pg 8.28 is stuck inactive for 42240.369934, current state undersized+peered, last acting [0]
    pg 8.2a is stuck inactive for 45566.934835, current state undersized+peered, last acting [0]
    pg 8.2d is stuck inactive for 42240.371314, current state undersized+peered, last acting [0]
    pg 8.2f is stuck inactive for 45566.913284, current state undersized+peered, last acting [0]
    pg 8.32 is stuck inactive for 42240.354304, current state undersized+peered, last acting [0]
    ....
    pg 8.28 is stuck undersized for 42065.616897, current state undersized+peered, last acting [0]
    pg 8.2a is stuck undersized for 42065.613246, current state undersized+peered, last acting [0]
    pg 8.2d is stuck undersized for 42065.951760, current state undersized+peered, last acting [0]
    pg 8.2f is stuck undersized for 42065.610464, current state undersized+peered, last acting [0]
    pg 8.32 is stuck undersized for 42065.959081, current state undersized+peered, last acting [0]
    ....

可见在数据修复中, 出现了inactive和undersized的值, 则是不正常的现象

解决方法：

①处理inactive的pg:
重启一下osd服务即可

[root@ceph1 ~]# systemctl restart ceph-osd.target

继续查看集群状态发现，inactive值的pg已经恢复正常，此时还剩undersized的pg。

[root@ceph1 ~]# ceph -s
  cluster:
    id:     13430f9a-ce0d-4d17-a215-272890f47f28
    health: HEALTH_WARN
            1 filesystem is degraded
            241/723 objects misplaced (33.333%)
            Degraded data redundancy: 59 pgs undersized
 
  services:
    mon: 3 daemons, quorum ceph2,ceph1,ceph3
    mgr: ceph1(active), standbys: ceph2, ceph3
    mds: cephfs-1/1/1 up  {0=ceph1=up:rejoin}
    osd: 3 osds: 3 up, 3 in; 229 remapped pgs
    rgw: 1 daemon active
 
  data:
    pools:   8 pools, 288 pgs
    objects: 241  objects, 3.4 KiB
    usage:   3.0 GiB used, 245 GiB / 248 GiB avail
    pgs:     241/723 objects misplaced (33.333%)
             224 active+clean+remapped
             59  active+undersized
             5   active+clean
 
  io:
    client:   1.2 KiB/s rd, 1 op/s rd, 0 op/s wr

②处理undersized的pg:
在这里插入图片描述

学会出问题先查看健康状态细节，仔细分析发现虽然设定的备份数量是3，但是PG 12.x却只有两个拷贝，分别存放在OSD 0~2的某两个上。

[root@ceph1 ~]# ceph health detail 
HEALTH_WARN 241/723 objects misplaced (33.333%); Degraded data redundancy: 59 pgs undersized
OBJECT_MISPLACED 241/723 objects misplaced (33.333%)
PG_DEGRADED Degraded data redundancy: 59 pgs undersized
    pg 12.8 is stuck undersized for 1910.001993, current state active+undersized, last acting [2,0]
    pg 12.9 is stuck undersized for 1909.989334, current state active+undersized, last acting [2,0]
    pg 12.a is stuck undersized for 1909.995807, current state active+undersized, last acting [0,2]
    pg 12.b is stuck undersized for 1910.009596, current state active+undersized, last acting [1,0]
    pg 12.c is stuck undersized for 1910.010185, current state active+undersized, last acting [0,2]
    pg 12.d is stuck undersized for 1910.001526, current state active+undersized, last acting [1,0]
    pg 12.e is stuck undersized for 1909.984982, current state active+undersized, last acting [2,0]
    pg 12.f is stuck undersized for 1910.010640, current state active+undersized, last acting [2,0]

进一步查看集群osd状态树，发现ceph2和cepn3宕机再恢复后，osd.1 和osd.2进程已不在ceph2和cepn3上。

[root@ceph1 ~]# ceph osd tree
ID CLASS WEIGHT  TYPE NAME               STATUS REWEIGHT PRI-AFF 
-1       0.24239 root default                                    
-9       0.16159     host centos7evcloud                         
 1   hdd 0.08080         osd.1               up  1.00000 1.00000 
 2   hdd 0.08080         osd.2               up  1.00000 1.00000 
-3       0.08080     host ceph1                                  
 0   hdd 0.08080         osd.0               up  1.00000 1.00000 
-5             0     host ceph2                                  
-7             0     host ceph3

分别查看osd.1 和osd.2服务状态。
在这里插入图片描述

解决方法：

分别进入到ceph2和ceph3节点中重启osd.1 和osd.2服务，将这两个服务重新映射到ceph2和ceph3节点中。

[root@ceph1 ~]# ssh ceph2
[root@ceph2 ~]# systemctl restart ceph-osd@1.service
[root@ceph2 ~]# ssh ceph3
[root@ceph3 ~]# systemctl restart ceph-osd@2.service

最后查看集群osd状态树发现这两个服务重新映射到ceph2和ceph3节点中。

[root@ceph3 ~]# ceph osd tree
ID CLASS WEIGHT  TYPE NAME               STATUS REWEIGHT PRI-AFF 
-1       0.24239 root default                                    
-9             0     host centos7evcloud                         
-3       0.08080     host ceph1                                  
 0   hdd 0.08080         osd.0               up  1.00000 1.00000 
-5       0.08080     host ceph2                                  
 1   hdd 0.08080         osd.1               up  1.00000 1.00000 
-7       0.08080     host ceph3                                  
 2   hdd 0.08080         osd.2               up  1.00000 1.00000

集群状态也显示了久违的HEALTH_OK。

[root@ceph3 ~]# ceph -s
  cluster:
    id:     13430f9a-ce0d-4d17-a215-272890f47f28
    health: HEALTH_OK
 
  services:
    mon: 3 daemons, quorum ceph2,ceph1,ceph3
    mgr: ceph1(active), standbys: ceph2, ceph3
    mds: cephfs-1/1/1 up  {0=ceph1=up:active}
    osd: 3 osds: 3 up, 3 in
    rgw: 1 daemon active
 
  data:
    pools:   8 pools, 288 pgs
    objects: 241  objects, 3.6 KiB
    usage:   3.1 GiB used, 245 GiB / 248 GiB avail
    pgs:     288 active+clean

6.卸载CephFS后再挂载时报错

挂载命令如下：

mount -t ceph 10.0.86.246:6789,10.0.86.221:6789,10.0.86.253:6789:/ /mnt/mycephfs/ -o name=admin,secret=AQBAI/JbROMoMRAAbgRshBRLLq953AVowLgJPw==

卸载CephFS后再挂载时报错：mount error(2): No such file or directory
说明：首先检查/mnt/mycephfs/目录是否存在并可访问，我的是存在的但依然报错No such file or directory。但是我重启了一下osd服务意外好了，可以正常挂载CephFS。

[root@ceph1 ~]# systemctl restart ceph-osd.target
[root@ceph1 ~]# mount -t ceph 10.0.86.246:6789,10.0.86.221:6789,10.0.86.253:6789:/ /mnt/mycephfs/ -o name=admin,secret=AQBAI/JbROMoMRAAbgRshBRLLq953AVowLgJPw==

可见挂载成功~！

[root@ceph1 ~]# df -h
Filesystem                                            Size  Used Avail Use% Mounted on
/dev/vda2                                              48G  7.5G   41G  16% /
devtmpfs                                              1.9G     0  1.9G   0% /dev
tmpfs                                                 2.0G  8.0K  2.0G   1% /dev/shm
tmpfs                                                 2.0G   17M  2.0G   1% /run
tmpfs                                                 2.0G     0  2.0G   0% /sys/fs/cgroup
tmpfs                                                 2.0G   24K  2.0G   1% /var/lib/ceph/osd/ceph-0
tmpfs                                                 396M     0  396M   0% /run/user/0
10.0.86.246:6789,10.0.86.221:6789,10.0.86.253:6789:/  249G  3.1G  246G   2% /mnt/mycephfs

积累中。。。

=========================================================================

总结：

查看集群状态发现报错或警告后，往往通过ceph health detail命令可以查看到系统给出的处理建议。通过这些建议一般可以处理大多数集群出现的问题。

SL_World

关注

5
点赞
踩
42

收藏

觉得还不错? 一键收藏
打赏
3
评论
Ceph集群报错解决方案笔记

当前Ceph版本和CentOS版本：[root@ceph1 ceph]# ceph -vceph version 13.2.2 (02899bfda814146b021136e9d8e80eba494e1126) mimic (stable)[root@ceph1 ceph]# cat /etc/redhat-release CentOS Linux release 7.5.1804 (C...
复制链接

扫一扫