DSP28335烧写程序到FLASH

最新推荐文章于 2024-10-19 18:11:25 发布

纳千溪而澄百湖

最新推荐文章于 2024-10-19 18:11:25 发布

阅读量4.8k

点赞数 2

文章标签： 28335 FLASH 程序烧写 CMD文件

本文链接：https://blog.csdn.net/SSW_2017A/article/details/95053201

版权

在烧写程序到DSP28335的FLASH时遇到错误：Verification failed，提示地址0x04000不匹配。通过注释掉内存分配中的ZONE0，成功将程序烧写进去。问题可能与FLASH内存分配的CMD文件有关，正确配置CMD文件以确保程序断电后能自动运行。

摘要由CSDN通过智能技术生成

最近烧写程序到FLASH中。出现下面错误：

Verification failed: Values at address 0x04000@Program do not match Please verify target memory and memory map.

检查内存分配，起始地址0X04000为XINTF Zone 0。

而只是把ZONE0这一行注释掉，就能把程序烧写进去了。

MEMORY
{
PAGE 0: /* Program Memory */
/* Memory (RAM/FLASH/OTP) blocks can be moved to PAGE1 for data allocation */

//ZONE0 : origin = 0x004000, length = 0x001000 /* XINTF zone 0 */
RAML0 : origin = 0x008000, length = 0x001000 /* on-chip RAM block L0 */
RAML1 : origin = 0x009000, length = 0x001000 /* on-chip RAM block L1 */
RAML2 : origin = 0x00A000, length = 0x001000 /* on-chip RAM block L2 */
RAML3 : origin = 0x00B000, length = 0x001000 /* on-chip RAM block L3 */
ZONE6 : origin = 0x0100000, length = 0x100000 /* XINTF zone 6 */
ZONE7A : origin = 0x0200000, length = 0x00FC00 /* XINTF zone 7 - program space */
FLASHH : origin = 0x300000, length = 0x008000 /* on-chip FLASH */
FLASHG : origin = 0x308000, length = 0x008000 /* on-chip FLASH */
FLASHF : origin = 0x310000, length = 0x008000 /* on-chip FLASH */
FLASHE : origin = 0x318000, length = 0x008000 /* on-chip FLASH */
FLASHD : origin = 0x320000, length = 0x008000 /* on-chip FLASH */
FLASHC : origin = 0x328000, length = 0x0