1.she
*element* Find element
2.SEARCH command searches a file or set of files for a pattern and displays the lines containing that pattern.
格式:search string filename //Search for string in element
3.LIST command displays information about the elements of a configuration.
list element List children of element
list/parent element List parent of element
list/parent/all List all parents of element
4.HISTORY command displays information from the history file of the current configuration,or from the globle history file.
history/since[=date_value]
date_value must be specified according to the international format”YYYY-MMM-DD”.
history/user_name[=user_name]
例子:>HISTORY/USER_NAME=F_GAGNON
例子:>CONFIG DEMO >HISTORY COM_*.COM
5.VIEW command ??????????????????
6.HELP command:The help command displays information on the purpose,syntax,and use of a SIMex-PLUS command.Additional information can be obtained by indicating a command name,parameter name,or qualifier name to the “Topics?”prompt of the HELP command.
格式:help[command_name]
ex1:SIMex-PLUS>help
ex2:SIMex-PLUS>help ls
CCU:C-Bus Check Utility page31
The C-Bus Utility(CCU) is a diagnostic software utility that runs on the host computer.CCU’s prime function is to help locate faulty I/O cards in the standard interface throuth tolerance tests.
Interface Assignment:address file get from configuration which named “*adr*” or ”*dmc*”.
To begin a session with CCU ,the user must log on a terminal and type CCU.
list(lis)命令:is used to display information to the users.
ASSIGNMENT(ass)选项:This qualifier is used to display a list of interface assignments that the user can use in the Report command.
ex:CCU>lis ass dip
CCU>lis ass dop
CCU>lis ass /chas=01/slot=02
CCU>lis ass /chas=01
CCU>lis ass /slot=02
CHASSIS(cha)选项:This qualifer is used to display the chassis that are on-line and off-line.
CCU>lis cha 检查chassis是否在线。
REPORT命令:It can be used to request a test to be made on a specific card independently of the current test being performed by the host.The simulation is not effected in any way.The results of a test are displayed on the user terminal.The report command can also be used to check the power level to each chassis.
CCU>rep di002
POWER(power)选项:If the POWER option is selected,a POWER test will be performed on every chassis configured in the interface.The test performed will refer to the +24V,+15V,and the -15V source.
CCU>rep power
CCU>x or exit
ethertst:Ehternet Off-line Diagnostic Test
The Ethertst Utility is a program designed specifically to test the Ethernet Link for Standard Interface and DN1 DMCs.Two files constitute this utility(ethertst,ethertst.hlp).
To run this utility simply enter the following command at the prompt.
>ethertst
before the user can access these commands,a device must be allocated(分配,指定,配置).Ethertst prompts the user to allocate devices such as:cae_ent0,cae_ent1,cae_ent2,etc.
常用命令:
audit which provides the user with a list of all the DMCs that are configured properly on the system.这个命令可以简写为a .
The user can only allocate one device at a time.The device can be de-allocated with the de-allocate command.
de-allocate:This command de-allocates a previously allocated device.
quit:This command allowes the user to quit.
如何查看配置网卡情况:
>ls /dev/cae*
/dev/cae_ent0 /dev/cae_ent1
>sme
/cae/simex_plus/element
>ls ether*
ethernet_location.dat.20 ethertst.exe.1*
>more ethernet_location.dat.20
1.CAE DMC_IO
2.CAE DMC1_IO
3....
The letter x to the right of the DMC number indicates which DMCs are configured.
ex:
首先要保证模拟机处于卸载状态。
>ethertst
>/dev/cae_ent1 or cae_ent1 or ent1
>a or audit
>de
>/dev/cae_ent2 or cae_ent2 or ent2
>a
>quit or q
Monitoring Computer Resource Utilization page225
Monitor computer resource utilization using the Program Performance Utility(PFU).
The Program Performance Utility(PFU) provides an accurate set of execution times of real-time programs.It allows the user to do individual time measurements for specific programs or group of programs during a pre-selected number of iterations.A summary containing timing information on all programs can also be requested.Programs can be linked/unlinked from the real-time process and moved from on execution band to another.
%pfu
PFU>
Examine your Errors Utility(EYE)
EYE is a diagnostic software utility graphically oriented that runs on the host computer.EYE examines hardware errors from different simulator components such as interface,visual,motion control,instructor operator system,host computer,etc.
>eye