需求:R1-R2-R3-R4-R5运行RIPV2
R6-R7运行RIPV1
1,使用合理IP地址规划网络,各自创建环回接口
2,R1创建环回172.16.1.1/24 172.16.2.1/24 172.16.3.1/24
3,要求R3使用R2访问R1环回
4,减少路由条目数量,增加路由传递安全性
5,R5创建一个环回模拟运营商,不能宣告
6,R1 telnet R2环回实际telnet到R7上
7,R6-R7路由器不能学习到达R1环回路由
8,全网可达
r1配置
[r1]int l0
[r1-LoopBack0]ip a 1.1.1.1 24
[r1-LoopBack0]int l1
[r1-LoopBack1]ip a 172.16.1.1 24
[r1-LoopBack1]int l2
[r1-LoopBack2]ip a 172.16.2.1 24
[r1-LoopBack2]int l3
[r1-LoopBack3]ip a 172.16.3.1 24
[r1-LoopBack3]int g0/0/0
[r1-GigabitEthernet0/0/0]ip a 192.168.2.1 24
[r1-GigabitEthernet0/0/0]int g0/0/1
[r1-GigabitEthernet0/0/1]ip a 192.168.1.1 24
r2配置
[r2]int l0
[r2-LoopBack0]ip a 2.2.2.2 24
[r2-LoopBack0]int g0/0/0
[r2-GigabitEthernet0/0/0]ip a 192.168.2.2 24
[r2-GigabitEthernet0/0/0]int g0/0/1
[r2-GigabitEthernet0/0/1]ip a 192.168.3.1 24
r3
[r3]int l0
[r3-LoopBack0]ip a 3.3.3.3 24
[r3-LoopBack0]int g0/0/0
[r3-GigabitEthernet0/0/0]ip a 192.168.3.2 24
[r3-Giga