嵌入式实验 (实验一)GPIO 口控制 LED 实验
1.新建工程,具体见嵌入式新建工程那篇博客2.连接开发板,设置连接然后点击setting然后点击addadd,然后确定即可3.先编写代码,再编译,再下载#include "stm32f10x.h"void GPIO_Configuration(void){ GPIO_InitTypeDef GPIO_InitStructure; GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4|GPIO_Pin_5|GPIO_Pi..
复制链接