ngrep 是grep(在文本中搜索字符串的工具)的网络版,他力求更多的grep特征,
用于搜寻指定的数据包。正由于安装ngrep需用到libpcap库, 所以支持大量的
操作系统和网络协议。能识别TCP、UDP和ICMP包,理解bpf的过滤机制。
ngrep搜寻数据包
ngrep 是grep(在文本中搜索字符串的工具)的网络版,他力求更多的grep特征,
用于搜寻指定的数据包。正由于安装ngrep需用到libpcap库, 所以支持大量的
操作系统和网络协议。能识别TCP、UDP和ICMP包,理解bpf的过滤机制。
ngrep下载地址:http://ngrep.sourceforge.net/;
libpcap下载地址:http://www.tcpdump.org/。
使用方法:()
usage: ngrep <-LhNXViwqpevxlDtTRM> <-IO pcap_dump> <-n num> <-d dev> <-A num>
<-s snaplen> <-S limitlen> <-W normal|byline|single|none> <-c cols>
<-P char> <-F file> <match expression> <bpf filter>
-h is help/usage
-V is version information
-q is be quiet (don't print packet reception hash marks)静默模式,如果没有此开关,未匹配的数据包都以“#”显示
-e is show empty packets 显示空数据包
-i is ignore case 忽略大小写
-v is invert match 反转匹配
-R is don't do privilege revocation logic
-x is print in alternate hexdump format 以16进制格式显示
-X is interpret match expression as hexadecimal 以16进制格式匹配
-w is word-regex (expression must match as a word) 整字匹配
-p is don't go into promiscuous mode 不使用混杂模式
-l is make stdout line buffered
-D is replay pcap_dumps with their recorded time intervals
-t is print timestamp every time a packet is matched在每个匹配的包之前显示时间戳
-T is print delta timestamp every time a packet is matched显示上一个匹配的数据包之间的时间间隔
-M is don't do multi-line match (do single-line match instead)仅进行单行匹配
-I is read packet stream from pcap format file pcap_dump 从文件中读取数据进行匹配
-O is dump matched packets in pcap format to pcap_dump 将匹配的数据保存到文件
-n is look at only num packets 仅捕获指定数目的数据包进行查看
-A is dump num packets after a match匹配到数据包后Dump随后的指定数目的数据包
-s is set the bpf caplen
-S is set the limitlen on matched packets
-W is set the dump format (normal, byline, single, none) 设置显示格式byline将解析包中的换行符
-c is force the column width to the specified size 强制显示列的宽度
-P is set the non-printable display char to what is specified
-F is read the bpf filter from the specified file 使用文件中定义的bpf(Berkeley Packet Filter)
-N is show sub protocol number 显示由IANA定义的子协议号
-d is use specified device (index) instead of the pcap default 使用哪个网卡,可以用-L选项查询
-L is show the winpcap device list index 查询网卡接口
举例:
C:\ngrep>ngrep.exe -d2 -N -q PASS
interface: \Device\NPF_{ADAAEBF4-46FA-485E-B3EB-4ACB56285D80} (192.168.1.0/255.2
55.255.0)
match: PASS
T(6) 192.168.1.111:1717 -> 123.125.50.29:110 [AP]
PASS 123456..