配IP+ospf宣告
<r1>system-view
[r1]interface g0/0/1
[r1-GigabitEthernet0/0/1]ip address 172.16.97.1 19
[r1-GigabitEthernet0/0/1]quit
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ip address 172.16.1.1 19
[r1-GigabitEthernet0/0/0]quit
[r1]interface LoopBack 0
[r1-LoopBack0]ip address 1.1.1.1 32
[r1-LoopBack0]quit
[r1]ospf 1 router-id 1.1.1.1
[r1-ospf-1]area 0
[r1-ospf-1-area-0.0.0.0]network 1.1.1.1 0.0.0.0
[r1-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.0.0
[r1-ospf-1-area-0.0.0.0]quit
[r1-ospf-1]area 1
[r1-ospf-1-area-0.0.0.1]network 0.0.0.0 255.255.255.255
[r1-ospf-1-area-0.0.0.1]quit
[r1-ospf-1]area 0
[r1-ospf-1-area-0.0.0.0]net
[r1-ospf-1-area-0.0.0.0]network 172.16.1.0 0.0.0.255
[r1-ospf-1-area-0.0.0.0]quit
[r1-ospf-1]area 1
[r1-ospf-1-area-0.0.0.1]network 172.16.97.0 0.0.0.255
<r2>system-view
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip address 172.16.33.1 19
[r2-GigabitEthernet0/0/0]quit
[r2]interface g0/0/1
[r2-GigabitEthernet0/0/1]ip address 172.16.129.1 19
[r2-GigabitEthernet0/0/1]quit
[r2]interface LoopBack 0
[r2-LoopBack0]ip address 2.2.2.2 32
[r2-LoopBack0]quit
[r2]ospf 1 rou
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]area 0
[r2-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
[r2-ospf-1-area-0.0.0.0]network 0.0.0.0 255.255.255.255
[r2-ospf-1-area-0.0.0.0]quit
[r2-ospf-1]quit
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]area 2
[r2-ospf-1-area-0.0.0.2]network 172.16.0.0 0.0.255.255
[r2-ospf-1-area-0.0.0.2]network 172.16.0.0 0.0.0.255
[r2-ospf-1-area-0.0.0.2]network 172.16.33.0 0.0.0.255
[r2-ospf-1-area-0.0.0.2]quit
[r2-ospf-1]area 2
[r2-ospf-1-area-0.0.0.2]network 172.16.129.0 0.0.0.0
[r2-ospf-1-area-0.0.0.2]quit
[r2-ospf-1]area 0
[r2-ospf-1-area-0.0.0.0]network 172.16.33.0 0.0.0.0
<r3>system-view
Enter system view, return user view with Ctrl+Z.
[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]ip address 172.16.65.1 19
[r3-GigabitEthernet0/0/0]quit
[r3]interface g0/0/1
[r3-GigabitEthernet0/0/1]ip address 172.16.161.1 19
[r3-GigabitEthernet0/0/1]quit
[r3]interface lo
[r3]interface LoopBack 0
[r3-LoopBack0]ip address 3.3.3.3 32
[r3-LoopBack0]q
[r3]ospf 1 route-id 3.3.3.3
[r3-ospf-1]area 0
[r3-ospf-1-area-0.0.0.0]network 3.3.3.3 0.0.0.0
[r3-ospf-1-area-0.0.0.0]network 172.16.65.0 0.0.0.255
[r3-ospf-1-area-0.0.0.0]quit
[r3-ospf-1]area 3
[r3-ospf-1-area-0.0.0.3]network 172.16.161.0 0.0.0.0
[r3-ospf-1-area-0.0.0.3]quit
[r3-ospf-1]quit
<r4>system-view
[r4]interface g0/0/0
[r4-GigabitEthernet0/0/0]ip address 172.16.161.2 19
[r4-GigabitEthernet0/0/0]q
[r4]interface LoopBack 0
[r4-LoopBack0]ip address 4.4.4.4 32
[r4-LoopBack0]quit
[r4]ospf 1 router-id 4.4.4.4
[r4-ospf-1]area 3
[r4-ospf-1-area-0.0.0.3]network 4.4.4.4 0.0.0.0
[r4-ospf-1-area-0.0.0.3]network 172.16.161.0 0.0.0.255
[r4-ospf-1-area-0.0.0.3]network 172.16.255.0 0.0.0.255
<r5>system-view
Enter system view, return user view with Ctrl+Z.
[r5]interface g0/0/0
[r5-GigabitEthernet0/0/0]ip address 172.16.193.2 19
[r5-GigabitEthernet0/0/0]q
[r5]interface LoopBack 0
[r5-LoopBack0]ip address 5.5.5.5 32
[r5-LoopBack0]quit
[r5]ospf 1 router-id 5.5.5.5
[r5-ospf-1]area 2
[r5-ospf-1-area-0.0.0.2]network 172.16.129.0 0.0.0.255
[r5-ospf-1-area-0.0.0.2]network 5.5.5.5 0.0.0.0
[r5-ospf-1-area-0.0.0.2]network 172.16.193.0 0.0.0.255<r6>system-view
Enter system view, return user view with Ctrl+Z.
[r6]interface LoopBack 0
[r6-LoopBack0]ip address 6.6.6.6 32
[r6-LoopBack0]quit
[r6]ospf 1 router-id 6.6.6.6
[r6-ospf-1]area 1
[r6-ospf-1-area-0.0.0.1]network 172.16.97.0 0.0.0.255
[r6-ospf-1-area-0.0.0.1]network 6.6.6.6 0.0.0.0
[r6-ospf-1-area-0.0.0.1]network 10.1.1.0 0.0.0.255
[r6-ospf-1-area-0.0.0.1]network 0.0.0.0 255.255.255.255
<r7>system-view n
[r7]dhcp enable
[r7]ip pool 1
Info: It's successful to create an IP address pool.
[r7-ip-pool-1]network 11.1.1.0 mask 24
[r7-ip-pool-1]gateway-list 11.1.1.1
[r7-ip-pool-1]dns-list 8.8.8.8
[r7-ip-pool-1]quit
[r7]interface g0/0/1
[r7-GigabitEthernet0/0/1]dhcp select global
[r7-GigabitEthernet0/0/1]quit
3.加快收敛速度
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ospf timer hello 5
[r1-GigabitEthernet0/0/0]quit
[r1]interface g0/0/1
[r1-GigabitEthernet0/0/1]ospf timer hello 5
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ospf timer hello 5
[r2-GigabitEthernet0/0/0]q
[r2]interface g0/0/1
[r2-GigabitEthernet0/0/1]ospf timer hello 5
[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]ospf timer hello 5
[r3-GigabitEthernet0/0/0]q
[r3]int
[r3]interface g0/0/1
[r3-GigabitEthernet0/0/1]ospf timer hello 5
[r4]int
[r4]interface g0/0/0
[r4-GigabitEthernet0/0/0]ospf timer hello 5
[r4-GigabitEthernet0/0/0]q
[r4]interface g0/0/1
[r4-GigabitEthernet0/0/1]ospf timer hello 5
[r5]interface g0/0/0
[r5-GigabitEthernet0/0/0]ospf timer hello 5
[r5-GigabitEthernet0/0/0]q
[r5]interface g0/0/1
[r5-GigabitEthernet0/0/1]ospf timer hello 5
[r6]interface g0/0/0
[r6-GigabitEthernet0/0/0]ospf timer hello 5
[r6-GigabitEthernet0/0/0]quit
[r6]interface g0/0/1
[r6-GigabitEthernet0/0/1]ospf timer hello 5
4.
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ospf dr-priority 0
[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]ospf dr-priority 0
5.
<Huawei>system-view
[Huawei]sysname sw2
[sw2]
Nov 29 2022 13:29:17-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 4, the c
hange loop count is 0, and the maximum number of records is 4095.vl
[sw2]vlan batch 2 3
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw2]
Nov 29 2022 13:29:27-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 5, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw2]interface e0/0/2
[sw2-Ethernet0/0/2]port link-type access
[sw2-Ethernet0/0/2]port default vlan 2
[sw2-Ethernet0/0/2]quit
[sw2]interface e0/0/3
[sw2-Ethernet0/0/3]port link-type access
[sw2-Ethernet0/0/3]port default vlan 3
[sw2-Ethernet0/0/3]q
[sw2]interface e0/0/1
[sw2-Ethernet0/0/1]port link-type trunk
[sw2-Ethernet0/0/1]port trunk allow-pass vlan all
<r5>system-view
Enter system view, return user view with Ctrl+Z.
[r5]interface g0/0/1.1
[r5-GigabitEthernet0/0/1.1]ip address 172.16.193.1 19
[r5-GigabitEthernet0/0/1.1]dot1q termination vid 2
Nov 29 2022 13:32:48-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/1.1 has entered the UP state.
[r5-GigabitEthernet0/0/1.1]q
[r5]interface g0/0/1.2
[r5-GigabitEthernet0/0/1.2]dot1q termination vid 3
[r5-GigabitEthernet0/0/1.2]ip address 192.168.2.1 24
Nov 29 2022 13:36:39-08:00 r5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1.2 has entered the UP state.
[r5-GigabitEthernet0/0/1.2]q
[r5]interface g0/0/1.1
[r5-GigabitEthernet0/0/1.1]ip address 192.168.1.1 24
[r5-GigabitEthernet0/0/1.1]quit
[r5]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[r5]ip pool 1
Info: It's successful to create an IP address pool.
[r5-ip-pool-1]network 192.168.1.0 mask 24
[r5-ip-pool-1]gateway-list 192.168.1.1
[r5-ip-pool-1]dns-list 8.8.8.8
[r5-ip-pool-1]q
[r5]ip pool 2
Info: It's successful to create an IP address pool.
[r5-ip-pool-2]network 192.168.2.0 mask 24
[r5-ip-pool-2]gateway-list 192.168.2.1
[r5-ip-pool-2]dns-list 8.8.8.8
[r5-ip-pool-2]q
[r5]int
[r5]interface g0/0/1.1
[r5-GigabitEthernet0/0/1.1]dhcp select global
[r5-GigabitEthernet0/0/1.1]q
[r5]interface g0/0/1.2
[r5-GigabitEthernet0/0/1.2]dhcp select global
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname sw3
[sw3]vlan batch 4 5
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw3]
Nov 29 2022 16:05:23-08:00 sw3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 5, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw3]interface e0/0/2
[sw3-Ethernet0/0/2]port link-type access
[sw3-Ethernet0/0/2]port default vlan 4
[sw3-Ethernet0/0/2]
Nov 29 2022 16:06:33-08:00 sw3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 7, the c
hange loop count is 0, and the maximum number of records is 4095.q
[sw3]interface e0/0/3
[sw3-Ethernet0/0/3]port link-type access
[sw3-Ethernet0/0/3]port default vlan 5
[sw3-Ethernet0/0/3]
Nov 29 2022 16:07:03-08:00 sw3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 9, the c
hange loop count is 0, and the maximum number of records is 4095.q
[sw3]interface e0/0/1
[sw3-Ethernet0/0/1]port link-type trunk
[sw3-Ethernet0/0/1]port trunk allow-pass vlan all
<r4>system-view
Enter system view, return user view with Ctrl+Z.
[r4]interface g0/0/1.1
[r4-GigabitEthernet0/0/1.1]ip address 192.168.3.1 24
[r4-GigabitEthernet0/0/1.1]dot1q termination vid 4
Nov 29 2022 16:08:48-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/1.1 has entered the UP state.
[r4-GigabitEthernet0/0/1.1]q
[r4]interface g0/0/1.2
[r4-GigabitEthernet0/0/1.2]ip address 192.168.4.1 24
[r4-GigabitEthernet0/0/1.2]dot1q termination vid 5
[r4-GigabitEthernet0/0/1.2]q
[r4]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[r4]ip pool 1
Info: It's successful to create an IP address pool.
[r4-ip-pool-1]network 192.168.3.0 mask 24
[r4-ip-pool-1]gateway-list 192.168.3.1
[r4-ip-pool-1]dns-list 8.8.8.8
[r4-ip-pool-1]q
[r4]ip pool 2
[r4-ip-pool-2]network 192.168.4.0 mask 24
[r4-ip-pool-2]gateway-list 192.168.4.1
[r4-ip-pool-2]dns-list 8.8.8.8
[r4-ip-pool-2]q
[r4]interface g0/0/1.1
[r4-GigabitEthernet0/0/1.1]dhcp select global
[r4-GigabitEthernet0/0/1.1]q
[r4]int
[r4]interface g0/0/1.2
[r4-GigabitEthernet0/0/1.2]dhcp select global
[r6]acl 2000
[r6-acl-basic-2000]rule permit source any
[r6-acl-basic-2000]q
[r6]interface g0/0/1
[r6-GigabitEthernet0/0/1]nat outbound 2000
6.
7.
[r6]user-interface vty 0 4
[r6-ui-vty0-4]authentication-mode password
Please configure the login password (maximum length 16):123
8.
[r4]acl 3000
[r4-acl-adv-3000]rule deny tcp source 192.168.3.1 0.0.0.0 destination-port172.16.97.1 0.0.0.0 desyination-port eq 23
[r4-GigabitEthernet0/0/1]traffic-filter inbound acl 3000
[r5-acl-adv-3000]rule deny icmp source 192.168.2.1 0.0.0.0 destination 192.168.4.1 0.0.0.0 icmp-type echo-reply
[r5-GigabitEthernet0/0/1]traffic-filter inbound acl 3000