华为设备配置SEP+MSTP混合环

1. 配置SEP基本功能
   （1）配置SEP段和控制VLAN
   [LSW5]sep segment 1
   [LSW5-sep-segment1]control-vlan 10
   [LSW5-sep-segment1]protected-instance all
   [LSW6]sep segment 1
   [LSW6-sep-segment1]control-vlan 10
   [LSW6-sep-segment1]protected-instance all
   [LSW7]sep segment 1
   [LSW7-sep-segment1]control-vlan 10
   [LSW7-sep-segment1]protected-instance all
   （2）将设备加入SEP，并设置端口角色
   [LSW5-GigabitEthernet0/0/1]port link-type hybrid
   [LSW5-GigabitEthernet0/0/1]sep segment 1 edge no-neighbor primary
   [LSW5-GigabitEthernet0/0/2]port link-type hybrid
   [LSW5-GigabitEthernet0/0/2]stp disable
   [LSW5-GigabitEthernet0/0/2]sep segment 1
   [LSW6-GigabitEthernet0/0/1]port link-type hybrid
   [LSW6-GigabitEthernet0/0/1]stp disable
   [LSW6-GigabitEthernet0/0/1]sep segment 1
   [LSW6-GigabitEthernet0/0/2]port link-type hybrid
   [LSW6-GigabitEthernet0/0/2]sep segment 1 edge no-neighbor secondary
   [LSW7-GigabitEthernet0/0/1]port link-type hybrid
   [LSW7-GigabitEthernet0/0/1]stp disable
   [LSW7-GigabitEthernet0/0/1]sep segment 1
   [LSW7-GigabitEthernet0/0/2]port link-type hybrid
   [LSW7-GigabitEthernet0/0/2]stp disable
   [LSW7-GigabitEthernet0/0/2]sep segment 1
   （3）在中无邻居主边缘端口的设备LSW1上配置阻塞端口的方式为依据处于SEP段中间位置的端口为阻塞端口
   [LSW5]sep segment 1
   [LSW5-sep-segment1]block port middle
   （4）在LSW1上配置抢占模式为手工抢占
   [LSW5-sep-segment1]preempt manual
   （5）配置SEP拓扑变化通告
   [LSW5-sep-segment1]tc-notify stp
   [LSW6]sep segment 1
   [LSW6-sep-segment1]tc-notify stp
2. 配置MSTP基本功能
   （1）配置MST域
   [LSW1]stp region-configuration
   [LSW1-mst-region]region-name a1
   [LSW1-mst-region]active region-configuration
   [LSW2]stp region-configuration
   [LSW2-mst-region]region-name a1
   [LSW2-mst-region]active region-configuration
   [LSW3]stp region-configuration
   [LSW3-mst-region]region-name a1
   [LSW3-mst-region]active region-configuration
   [LSW4]stp region-configuration
   [LSW4-mst-region]region-name a1
   [LSW4-mst-region]active region-configuration
   [LSW5]stp region-configuration
   [LSW5-mst-region]region-name a1
   [LSW5-mst-region]active region-configuration
   [LSW6]stp region-configuration
   [LSW6-mst-region]region-name a1
   [LSW6-mst-region]active region-configuration
   （2）创建VLAN，并将环上接口加入VLAN，配置二层转发
   [LSW1]vlan 100
   [LSW1-GigabitEthernet0/0/1]port link-type hybrid
   [LSW1-GigabitEthernet0/0/1]port hybrid tagged vlan 100
   [LSW1-GigabitEthernet0/0/2]port link-type hybrid
   [LSW1-GigabitEthernet0/0/2]port hybrid tagged vlan 100
   [LSW1-GigabitEthernet0/0/3]port link-type hybrid
   [LSW1-GigabitEthernet0/0/3]port hybrid tagged vlan 100
   [LSW2]vlan 100
   [LSW2-GigabitEthernet0/0/1]port link-type hybrid
   [LSW2-GigabitEthernet0/0/1]port hybrid tagged vlan 100
   [LSW2-GigabitEthernet0/0/2]port link-type hybrid
   [LSW2-GigabitEthernet0/0/2]port hybrid tagged vlan 100
   [LSW2-GigabitEthernet0/0/3]port link-type hybrid
   [LSW2-GigabitEthernet0/0/3]port hybrid tagged vlan 100
   [LSW3]vlan 100
   [LSW3-GigabitEthernet0/0/1]port link-type hybrid
   [LSW3-GigabitEthernet0/0/1]port hybrid tagged vlan 100
   [LSW3-GigabitEthernet0/0/2]port link-type hybrid
   [LSW3-GigabitEthernet0/0/2]port hybrid tagged vlan 100
   [LSW3-GigabitEthernet0/0/3]port link-type hybrid
   [LSW3-GigabitEthernet0/0/3]port hybrid tagged vlan 100
   [LSW4]vlan 100
   [LSW4-GigabitEthernet0/0/1]port link-type hybrid
   [LSW4-GigabitEthernet0/0/1]port hybrid tagged vlan 100
   [LSW4-GigabitEthernet0/0/2]port link-type hybrid
   [LSW4-GigabitEthernet0/0/2]port hybrid tagged vlan 100
   [LSW4-GigabitEthernet0/0/3]port link-type hybrid
   [LSW4-GigabitEthernet0/0/3]port hybrid tagged vlan 100
   [LSW5]vlan batch 10 100
   [LSW5-GigabitEthernet0/0/1]port link-type hybrid
   [LSW5-GigabitEthernet0/0/1]port hybrid tagged vlan 10 100
   [LSW5-GigabitEthernet0/0/2]port link-type hybrid
   [LSW5-GigabitEthernet0/0/2]port hybrid tagged vlan 10 100
   [LSW6]vlan batch 10 100
   [LSW6-GigabitEthernet0/0/1]port link-type hybrid
   [LSW6-GigabitEthernet0/0/1]port hybrid tagged vlan 10 100
   [LSW6-GigabitEthernet0/0/2]port link-type hybrid
   [LSW6-GigabitEthernet0/0/2]port hybrid tagged vlan 10 100
   [LSW7]vlan batch 10 100
   [LSW7-GigabitEthernet0/0/1]port link-type hybrid
   [LSW7-GigabitEthernet0/0/1]port hybrid tagged vlan 10 100
   [LSW7-GigabitEthernet0/0/2]port link-type hybrid
   [LSW7-GigabitEthernet0/0/2]port hybrid tagged vlan 10 100
   [LSW7-GigabitEthernet0/0/3]port link-type hybrid
   [LSW7-GigabitEthernet0/0/3]port hybrid tagged vlan 100
   （3）启动MSTP
   [LSW1]stp enable
   [LSW2]stp enable
   [LSW3]stp enable
   [LSW4]stp enable
   [LSW5]stp enable
   [LSW6]stp enable
   （4）配置LSW1为根桥、LSW2为备份根桥
   [LSW1]stp root primary
   [LSW2]stp root secondary
   3.验证配置
   

Shutdown LSW5的G0/0/1接口