华为设备配置静态ARP

1. 在Switch上创建VLAN，并配置各接口的IP地址
   [LSW1]vlan batch 10 20 30 40 100
   [LSW1-GigabitEthernet0/0/1]port link-type access
   [LSW1-GigabitEthernet0/0/1]port default vlan 10
   [LSW1-Vlanif10]ip add 10.1.1.10 24
   [LSW1-GigabitEthernet0/0/4]port link-type access
   [LSW1-GigabitEthernet0/0/4]port default vlan 100
   [LSW1-Vlanif100]ip add 10.1.10.10 24
   [LSW1-GigabitEthernet0/0/5]port link-type access
   [LSW1-GigabitEthernet0/0/5]port default vlan 40
   [LSW1-Vlanif40]ip add 10.1.4.1 24
   [LSW1-GigabitEthernet0/0/2]port link-type access
   [LSW1-GigabitEthernet0/0/2]port default vlan 20
   [LSW1-Vlanif20]ip add 10.1.2.10 24
   [LSW1-GigabitEthernet0/0/3]port link-type access
   [LSW1-GigabitEthernet0/0/3]port default vlan 30
   [LSW1-Vlanif30]ip add 10.1.3.10 24
2. 在Switch上配置静态ARP表项
   [LSW1]arp static 10.1.10.1 5489-983F-13E6 vid 100 interface GigabitEthernet 0/0/4
   [LSW1]arp static 10.1.1.1 5489-987E-4A36 vid 10 interface GigabitEthernet 0/0/1
   3.配置基于接口DHCP
   [LSW1]dhcp enable
   [LSW1]int Vlanif 20
   [LSW1-Vlanif20]dhcp select interface
   [LSW1-Vlanif20]int Vlanif 30
   [LSW1-Vlanif30]dhcp select interface
   [LSW1]dhcp snooping enable
   4.配置连通性
   [AR1-GigabitEthernet0/0/0]ip add 10.1.4.2 24
   [AR1]ospf 1
   [AR1-ospf-1-area-0.0.0.0]network 10.1.4.0 0.0.0.255
   [LSW1]ospf 1
   [LSW1-ospf-1]area 0
   [LSW1-ospf-1-area-0.0.0.0]network 10.1.10.0 0.0.0.255
   [LSW1-ospf-1-area-0.0.0.0]network 10.1.4.0 0.0.0.255
   [LSW1-ospf-1-area-0.0.0.0]network 10.1.1.0 0.0.0.255
   [LSW1-ospf-1-area-0.0.0.0]network 10.1.2.0 0.0.0.255
   [LSW1-ospf-1-area-0.0.0.0]network 10.1.3.0 0.0.0.255
   5.配置终端IP地址
   
   

PC1和PC2选择以DHCP模式获取IP地址
6.验证配置