Woodward PEAK 200 9905-864 数字控制单阀和机架汽轮机 Digital control of single valve and rack turbine

9905-864是伍德沃德峰150低成本数字控制单阀和单阀机架汽轮机。该模型在系列中作为交流/直流、NeMA4x定级模型。这意味着,除了防水和防尘之外,这个模型的设计是为了在腐蚀性环境中运行,这与许多其他数字控制不同。这个单元和系列中的其他单元一样,是使用单独的手持程序员单元来设置的,以减少系统中不必要的更改。

The 9905-864 is the Woodward Peak 150 low cost digital control single valve and single valve rack steam turbine. This model is used in the series as an AC/DC, NeMA4x grading model. This means that, in addition to being water and dust resistant, this model is designed to operate in corrosive environments, unlike many other digital controls. This unit, like the others in the series, is set up using a separate handheld programmer unit to reduce unnecessary changes in the system. 

单位特征

Unit feature 

该单元具有系列标准功能,如带6个开关的前键和LED指示器,使操作员能够快速读取和与系统交互。这9905-864有一个内马D型电动机,以帮助更严格地控制涡轮速度。该单元具有双转速控制动力学和超光速旅行试验。这个单元的CPU是一个16位,12兆赫微处理器,这个处理器的状态可以通过前面板上的指示灯检查。其他指示器显示2个磁卡的状态,超速测试,远程速度设置信号,和关闭。 

The unit has a range of standard features, such as a front key with 6 switches and an LED indicator, allowing the operator to quickly read and interact with the system. The 9905-864 has a Nema Type D motor to help control the turbine speed more tightly. The unit has dual speed control dynamics and faster-than-light travel tests. The unit's CPU is a 16-bit, 12-megahertz microprocessor, the status of which can be checked by indicators on the front panel. Other indicators show the status of 2 magnetic cards, overspeed test, remote speed setting signal, and off. 

附加规格

Additional specification 

9905-864的交流/直流输入量为90-150VDC或88-132VAC(47-63赫兹)。9905-864的尺寸是19英寸(483毫米)宽12.2英寸(310毫米)高4.1英寸(105毫米)深。

The 9905-864 has AC/DC inputs of 90-150VDC or 88-132VAC(47-63 Hz). The 9905-864 measures 19 inches (483 mm) wide 12.2 inches (310 mm) high 4.1 inches (105 mm) deep. 

模拟输入 / Analog input	4-20马或1-5VDC远程速度设定信号   4-20 ma or 1-5VDC remote speed setting signal
实际速度输出 / Actual speed output	Scalable, 4-20/0-1mA
可配置读取输出 / Configurable read output	Scalable, 4-20/0-1mA