Allen-Bradley 1797-IRT8 热电偶输入模块 Thermocouple input module

Allen-Bradley 1797-IRT8驱动器是Flex Ex热电偶输入模块。Allen-Bradley设计了这种输入模块，使用8个通道进行输入，其信号范围为0至485欧姆和-40至100毫伏。驱动器的额定功率具有1.6瓦特的模块现场侧功耗，并且它需要小于9.5伏特DC的电源电压用于Ui，并且电流消耗小于1安培用于Li。1797-IRT8配有IP20外壳。外壳不防水。它只能在工厂的室内使用，并防止水的喷射和飞溅。它使用12 AWG绞合电缆进行连接。为了将输入模块安装在不同的位置，该驱动器配备了DIN导轨安装选项和面板安装选项。该模块的尺寸为长3.7英寸，宽2.95英寸，高1.8英寸。

The Allen-Bradley 1797-IRT8 driver is a Flex Ex thermocouple input module. Allen-Bradley designed the input module, which uses eight channels for input with a signal range of 0 to 485 ohms and -40 to 100 millivolts. The driver's power rating has a module field side power consumption of 1.6 watts, and it requires a supply voltage of less than 9.5 volts DC for Ui and a current consumption of less than 1 amp for Li. The 1797-IRT8 comes with an IP20 housing. The case is not waterproof. It can only be used indoors in the factory and prevents the spray and splashing of water. It is connected using 12 AWG stranded cable. In order to mount the input module in different positions, the driver is equipped with DIN rail mounting options and panel mounting options. The dimensions of the module are 3.7 inches long, 2.95 inches wide and 1.8 inches high. 

Allen-Bradley 1797-IRT8输入模块只能在-4至158华氏度的室温范围内运行。它还要求相对潮湿的环境，非冷凝湿度为5%至95%。输入模块的建立时间已设置为最终值的99%，时间范围为8毫秒。1797-IRT8变频器配有不同的状态指示灯，包括8个红色故障指示灯和1个绿色模块电源指示灯。该模块支持可配置的通道，允许该模块用于各种传感器。它还可以选择输入滤波器，降低滤波器设置以提供更好的降噪和分辨率，以及选择更高的滤波器设置以获得更快的性能。1797-IRT8变频器已通过C/US、UL、C-Tick和marine-GL认证。在这种类型的驱动器中，导线电阻补偿小于15瓦。它的总功耗为1.6瓦

The Allen-Bradley 1797-IRT8 input module can only operate in a room temperature range of -4 to 158 degrees Fahrenheit. It also requires a relatively humid environment with a non-condensing humidity of 5% to 95%. The setup time of the input module has been set to 99% of the final value, with a time range of 8 milliseconds. The 1797-IRT8 inverter is equipped with different status indicators, including 8 red fault indicators and 1 green module power indicator. The module supports configurable channels that allow the module to be used for a variety of sensors. It can also select input filters, lower filter Settings to provide better noise reduction and resolution, and select higher filter Settings for faster performance. The 1797-IRT8 inverter has been certified by C/US, UL, C-TICK and marine-GL. In this type of driver, the wire resistance compensation is less than 15 watts. It has a total power consumption of 1.6 watts