AC+AP漫游实验

实验拓扑

实验要求

1.AP1服务vlan10，AP2服务vlan20，实现三层漫游

2.AP1与AP2为不同AP组，直接转发

实验步骤

1.配置VLAN放行相关流量

交换机与AP接口为trunk口并修改PVID为30

2.配置相关业务使得ap上线

3.配置vap上线，AP可用

[AC6005-wlan-view]security-profile name HW  
[AC6005-wlan-sec-prof-HW]security wpa-wpa2 psk pass-phrase huawei123 aes
[AC6005-wlan-sec-prof-HW]q

[AC6005-wlan-view]vap-profile name HW
[AC6005-wlan-vap-prof-HW]forward-mode direct-forward 

[AC6005-wlan-vap-prof-HW]service-vlan vlan-id 10
Info: This operation may take a few seconds, please wait.done.
[AC6005-wlan-vap-prof-HW]security-profile HW
Info: This operation may take a few seconds, please wait.done.
[AC6005-wlan-vap-prof-HW]ssid HW

[AC6005-wlan-view]vap-profile name HW2
[AC6005-wlan-vap-prof-HW2]forward-mode direct-forward 
[AC6005-wlan-vap-prof-HW2]service-vlan vlan-id 20
Info: This operation may take a few seconds, please wait.done.
[AC6005-wlan-vap-prof-HW2]security-profile HW
Info: This operation may take a few seconds, please wait.done.
[AC6005-wlan-vap-prof-HW2]ssid-profile HW
Info: This operation may take a few seconds, please wait.done.

 
[AC6005-wlan-ap-group-1]vap-profile HW wlan 1 radio 0
Info: This operation may take a few seconds, please wait...done.
[AC6005-wlan-ap-group-2]vap-profile HW2 wlan 1 radio 0

5.修改信道防止其重复受到干扰

[AC6005-wlan-view] ap-id 0
配置2.4G射频（radio 0）：

[AC6005-wlan-ap-0] radio 0
设置信道和频宽：

[AC6005-wlan-radio-0/0] channel 20mhz 6
设置功率值：

[AC6005-wlan-radio-0/0] eirp 127

实验效果

接入AP1IP拿到vlan10

移动至AP2范围再次查看

可以看到IP未发生改变，我们在AC上查看此STA的漫游路径

可以看见属于三层漫游

我们在拿一台接入AP2查看IP，应该是属于vlan20的