ensp，交换机端口聚合——网络工程

 第一步：创建聚合端口

[Huawei]interface Eth-Trunk 1
[Huawei-Eth-Trunk1]quit

第二步。添加聚合端口，由于我们这里是01和02两个端口互相聚合的，所以要都添加

[Huawei]interface GigabitEthernet 0/0/1
[Huawei-GigabitEthernet0/0/1]et    
[Huawei-GigabitEthernet0/0/1]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei-GigabitEthernet0/0/1]
Oct  3 2022 16:29:09-08:00 Huawei %%01IFNET/4/IF_STATE(l)[0]:Interface Eth-Trunk
1 has turned into UP state.
[Huawei-GigabitEthernet0/0/1]quit
 

[Huawei]interface GigabitEthernet 0/0/2
[Huawei-GigabitEthernet0/0/2]et    
[Huawei-GigabitEthernet0/0/2]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.

同理，在另一个交换机上也要做同样的操作。

都做完之后查看一下SPT状态，