smart config
最近淘了块 了乐鑫的WiFi板,反正闲着也是闲着,那就用起来。环境搭建什么的百度已有,官网也有,不要花把时间搭建环境,没意思。配网成功那就没得啥好玩的了,os学习还不够深入,加油,希望自己一天比一天进步。后面想研究下声波配网。MARK
WiFi主要用来网络通信,连接不上网络就是废铁一堆,我研究了下乐鑫的smart config.详细原理可以看我的另外一篇博客,讲了自动配网原理。这里我只粘贴他们的代码了,很好看懂。底层已经被封装了,但是原理一样。提供了APP给我们,APP开源,那协议也已经看得出来了。代码可以从乐鑫官网上面下载。
/* FreeRTOS event group to signal when we are connected & ready to make a request */
static EventGroupHandle_t wifi_event_group;
/* The event group allows multiple bits for each event,
but we only care about one event - are we connected
to the AP with an IP? */
static const int CONNECTED_BIT = BIT0;
static const int ESPTOUCH_DONE_BIT = BIT1;
static const char *TAG = "sc";
void smartconfig_example_task(void * parm);
static esp_err_t event_handler(void *ctx, system_event_t *event)
{
switch(event->event_id) {
case SYSTEM_EVENT_STA_START:
xTaskCreate(smartconfig_example_task, "smartconfig_example_task", 4096, NULL, 3, NULL);
break;
case SYSTEM_EVENT_STA_GOT_IP:
xEventGroupSetBits(wifi_event_group, CONNECTED_BIT);
break;
case SYSTEM_EVENT_STA_DISCONNECTED:
esp_wifi_connect();
xEventGroupClearBits(wifi_event_group, CONNECTED_BIT);
break;
default:
break;
}
return ESP_OK;
}
static void initialise_wifi(void)
{
tcpip_adapter_init();
wifi_event_group = xEventGroupCreate();
ESP_ERROR_CHECK( esp_event_loop_init(event_handler, NULL) );
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
ESP_ERROR_CHECK( esp_wifi_init(&cfg) );
ESP_ERROR_CHECK( esp_wifi_set_mode(WIFI_MODE_STA) );
ESP_ERROR_CHECK( esp_wifi_start() );
}
static void sc_callback(smartconfig_status_t status, void *pdata)
{
switch (status) {
case SC_STATUS_WAIT:
ESP_LOGI(TAG, "SC_STATUS_WAIT");
break;
case SC_STATUS_FIND_CHANNEL:
ESP_LOGI(TAG, "SC_STATUS_FINDING_CHANNEL");
break;
case SC_STATUS_GETTING_SSID_PSWD:
ESP_LOGI(TAG, "SC_STATUS_GETTING_SSID_PSWD");
break;
case SC_STATUS_LINK:
ESP_LOGI(TAG, "SC_STATUS_LINK");
wifi_config_t *wifi_config = pdata;
ESP_LOGI(TAG, "SSID:%s", wifi_config->sta.ssid);
ESP_LOGI(TAG, "PASSWORD:%s", wifi_config->sta.password);
ESP_ERROR_CHECK( esp_wifi_disconnect() );
ESP_ERROR_CHECK( esp_wifi_set_config(ESP_IF_WIFI_STA, wifi_config) );
ESP_ERROR_CHECK( esp_wifi_connect() );
break;
case SC_STATUS_LINK_OVER:
ESP_LOGI(TAG, "SC_STATUS_LINK_OVER");
if (pdata != NULL) {
uint8_t phone_ip[4] = { 0 };
memcpy(phone_ip, (uint8_t* )pdata, 4);
ESP_LOGI(TAG, "Phone ip: %d.%d.%d.%d\n", phone_ip[0], phone_ip[1], phone_ip[2], phone_ip[3]);
}
xEventGroupSetBits(wifi_event_group, ESPTOUCH_DONE_BIT);
break;
default:
break;
}
}
void smartconfig_example_task(void * parm)
{
EventBits_t uxBits;
ESP_ERROR_CHECK( esp_smartconfig_set_type(SC_TYPE_ESPTOUCH) );
ESP_ERROR_CHECK( esp_smartconfig_start(sc_callback) );
while (1) {
uxBits = xEventGroupWaitBits(wifi_event_group, CONNECTED_BIT | ESPTOUCH_DONE_BIT, true, false, portMAX_DELAY);
if(uxBits & CONNECTED_BIT) {
ESP_LOGI(TAG, "WiFi Connected to ap");
}
if(uxBits & ESPTOUCH_DONE_BIT) {
ESP_LOGI(TAG, "smartconfig over");
esp_smartconfig_stop();
vTaskDelete(NULL);
}
}
}
log
I (372) wifi: mode : sta (24:0a:c4:00:44:86)
I (422) smartconfig: SC version: V2.6.6
I (3802) wifi: ic_enable_sniffer
I (3802) sc: SC_STATUS_FIND_CHANNEL
I (234592) smartconfig: TYPE: ESPTOUCH
I (234592) smartconfig: T|PHONE MAC:68:3e:34:88:59:bf
I (234592) smartconfig: T|AP MAC:a4:56:02:47:30:07
I (234592) sc: SC_STATUS_GETTING_SSID_PSWD
I (239922) smartconfig: T|pswd: 123456789
I (239922) smartconfig: T|ssid: IOT_DEMO_TEST
I (239922) smartconfig: T|bssid: a4:56:02:47:30:07
I (239922) wifi: ic_disable_sniffer
I (239922) sc: SC_STATUS_LINK
I (239932) sc: SSID:IOT_DEMO_TEST
I (239932) sc: PASSWORD:123456789
I (240062) wifi: n:1 0, o:1 0, ap:255 255, sta:1 0, prof:1
I (241042) wifi: state: init -> auth (b0)
I (241042) wifi: state: auth -> assoc (0)
I (241052) wifi: state: assoc -> run (10)
I (241102) wifi: connected with IOT_DEMO_TEST, channel 1
I (244892) event: ip: 192.168.0.152, mask: 255.255.255.0, gw: 192.168.0.1
I (244892) sc: WiFi Connected to ap
I (247952) sc: SC_STATUS_LINK_OVER
I (247952) sc: Phone ip: 192.168.0.31
I (247952) sc: smartconfig over