软件磁盘阵列RAID的设置

最新推荐文章于 2024-08-07 22:39:18 发布

猫上的树

最新推荐文章于 2024-08-07 22:39:18 发布

阅读量1.3k

点赞数

分类专栏： linux 文章标签：磁盘

本文链接：https://blog.csdn.net/a18829898663/article/details/70666828

版权

linux 专栏收录该内容

87 篇文章 1 订阅

订阅专栏

磁盘阵列全名是『 Redundant Arrays of Inexpensive Disks, RAID 』，容错式廉价磁盘阵列。 RAID 可以通过一些技术(软件或硬件)，将多个较小的磁盘整合成为一个较大的磁盘设备；而这个较大的磁盘功能可不止是储存而已，他还具有数据保护的功能呢。整个 RAID 由亍选择的等级 (level) 不同，而使得整合后的磁盘具有不同的功能，基本常见的等级有这几种：
RAID=0(等量模式,stripe):性能最佳
RAID-1 (映像模式, mirror)：完整备份
RAID 0+1，RAID 1+0
RAID 5：性能与数据备份的均衡考虑

以下构建一个RAID1的软件磁盘阵列
首先删除掉之前的分区
[root@localhost ~]# fdisk /dev/vdb 建立三个分区，类型为fd（Linux raid auto）
[root@localhost ~]# partprobe
root@localhost ~]# mdadm -C /dev/md0 -a yes -l 1 -n 2 -x 1 /dev/vdb{1..3} ##建立磁盘阵列，命名为/dev/md0 ，由两块分区组成，一块候补

 -C --create ：为创建 RAID 的选项；
 -a --auto=yes ：决定创建后面接的软件磁盘阵列装置，亦即 /dev/md0, /dev/md1...
--raid-devices=N ：使用几个磁碟 (partition) 作为磁盘阵列的装置
--spare-devices=N ：使用几个磁碟作为备用 (spare) 装置
--level=[015] ：配置这组磁盘阵列的等级。支持很多，不过建议只要用 0, 1, 5 即可
--detail ：后面所接的那个磁盘阵列装置的详细资讯

[root@localhost ~]# mkfs.xfs /dev/md0 ##格式化
[root@localhost ~]# mount /dev/md0 /mnt/
[root@localhost ~]# df -h

具体代码块如下：

监控方
[root@localhost ~]# watch -n 1 cat /proc/mdstat
操作方
第一：先清空之前的分区设定
第二：建立三个1G大小的分区，类型为fd（Linux raid auto）
[root@localhost ~]# fdisk /dev/vdb
Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.


Command (m for help): n
Partition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
Select (default p): p
Partition number (1-4, default 1): 
First sector (2048-20971519, default 2048): 
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-20971519, default 20971519): +1G
Partition 1 of type Linux and of size 1 GiB is set

Command (m for help): n
Partition type:
   p   primary (1 primary, 0 extended, 3 free)
   e   extended
Select (default p): p
Partition number (2-4, default 2): 
First sector (2099200-20971519, default 2099200): 
Using default value 2099200
Last sector, +sectors or +size{K,M,G} (2099200-20971519, default 20971519): +1G
Partition 2 of type Linux and of size 1 GiB is set

Command (m for help): n
Partition type:
   p   primary (2 primary, 0 extended, 2 free)
   e   extended
Select (default p): p
Partition number (3,4, default 3): 
First sector (4196352-20971519, default 4196352): 
Using default value 4196352
Last sector, +sectors or +size{K,M,G} (4196352-20971519, default 20971519): +1G
Partition 3 of type Linux and of size 1 GiB is set

Command (m for help): t
Partition number (1-3, default 3): 1
1e  Hidden W95 FAT1 80  Old Minix      
Hex code (type L to list all codes): fd
Changed type of partition 'Linux' to 'Linux raid autodetect'

Command (m for help): t
Partition number (1-3, default 3): 2
Hex code (type L to list all codes): fd
Changed type of partition 'Linux' to 'Linux raid autodetect'

Command (m for help): t
Partition number (1-3, default 3): 3
Hex code (type L to list all codes): fd
Changed type of partition 'Linux' to 'Linux raid autodetect'

Command (m for help): wq
The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@localhost ~]# partprobe 
Error: Partition(s) 1 on /dev/vdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use.  As a result, the old partition(s) will remain in use.  You should reboot now before making further changes.
[root@localhost ~]# fdisk -l

Disk /dev/vda: 10.7 GB, 10737418240 bytes, 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x00013f3e

   Device Boot      Start         End      Blocks   Id  System
/dev/vda1   *        2048    20970332    10484142+  83  Linux

Disk /dev/vdb: 10.7 GB, 10737418240 bytes, 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x9d727787

   Device Boot      Start         End      Blocks   Id  System
/dev/vdb1            2048     2099199     1048576   fd  Linux raid autodetect
/dev/vdb2         2099200     4196351     1048576   fd  Linux raid autodetect
/dev/vdb3         4196352     6293503     1048576   fd  Linux raid autodetect
第三：建立磁盘阵列
[root@localhost ~]# mdadm -C /dev/md0 -a yes -l 1 -n 2 -x 1 /dev/vdb{1..3}
mdadm: cannot open /dev/vdb1: Device or resource busy  ##因为没有把挂载去掉
[root@localhost ~]# df
Filesystem     1K-blocks    Used Available Use% Mounted on
/dev/vda1       10473900 3151228   7322672  31% /
devtmpfs          927072       0    927072   0% /dev
tmpfs             942660      80    942580   1% /dev/shm
tmpfs             942660   17048    925612   2% /run
tmpfs             942660       0    942660   0% /sys/fs/cgroup
/dev/vdb1          98988   25776     73212  27% /pub
[root@localhost ~]# umount /pub
[root@localhost ~]# mdadm -C /dev/md0 -a yes -l 1 -n 2 -x 1 /dev/vdb{1..3} ##建立磁盘阵列，命名为/dev/md0 ，由两块分区组成，一块候补
mdadm: Note: this array has metadata at the start and
    may not be suitable as a boot device.  If you plan to
    store '/boot' on this device please ensure that
    your boot-loader understands md/v1.x metadata, or use
    --metadata=0.90
mdadm: largest drive (/dev/vdb2) exceeds size (102272K) by more than 1%
Continue creating array? y
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
[root@localhost ~]# mkfs.xfs /dev/md0   ##格式化文件系统为xfs
meta-data=/dev/md0               isize=256    agcount=4, agsize=6392 blks
         =                       sectsz=512   attr=2, projid32bit=1
         =                       crc=0
data     =                       bsize=4096   blocks=25568, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0 ftype=0
log      =internal log           bsize=4096   blocks=853, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0
[root@localhost ~]# mount /dev/md0 /mnt/
[root@localhost ~]# df
Filesystem     1K-blocks    Used Available Use% Mounted on
/dev/vda1       10473900 3124168   7349732  30% /
devtmpfs          927072       0    927072   0% /dev
tmpfs             942660      84    942576   1% /dev/shm
tmpfs             942660   17032    925628   2% /run
tmpfs             942660       0    942660   0% /sys/fs/cgroup
/dev/md0         1044588   32928   1011660   4% /mnt
[root@localhost ~]# df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/vda1        10G  3.0G  7.1G  30% /
devtmpfs        906M     0  906M   0% /dev
tmpfs           921M   84K  921M   1% /dev/shm
tmpfs           921M   17M  904M   2% /run
tmpfs           921M     0  921M   0% /sys/fs/cgroup
/dev/md0       1021M   33M  988M   4% /mnt
                            以最小的显示

[root@localhost ~]# fdisk -l

Disk /dev/vda: 10.7 GB, 10737418240 bytes, 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x00013f3e

   Device Boot      Start         End      Blocks   Id  System
/dev/vda1   *        2048    20970332    10484142+  83  Linux

Disk /dev/vdb: 10.7 GB, 10737418240 bytes, 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x9d727787

   Device Boot      Start         End      Blocks   Id  System
/dev/vdb1            2048     2099199     1048576   fd  Linux raid autodetect
/dev/vdb2         2099200     4196351     1048576   fd  Linux raid autodetect
/dev/vdb3         4196352     6293503     1048576   fd  Linux raid autodetect

Disk /dev/md0: 104 MB, 104726528 bytes, 204544 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
``