PROT-302: Failed to initialize ocrdump

[root@r2 bin]# pwd
/u01/app/oracle/product/10.2.0/crs_1/bin
[root@r2 bin]# ls
cemutlo             crs_getperm         dbhome             evmwatch      kgmgrO        ocrconfig          racgmain
cemutlo.bin         crs_getperm.bin     diagcollection.pl  evmwatch.bin  kgpmon        ocrconfig.bin      racgons
cemutls             crs_profile         echodo             evt.sh        lbuilder      ocrData_r2.tar.gz  racgons.bin
cemutls.bin         crs_profile.bin     evmd               extjob        lcsscan       ocrdump            racgvip
clscfg              crs_register        evmd.bin           extjobo       linkshlib     ocrdump.bin        racgwrap
clscfg.bin          crs_register.bin    evminfo            extjobO       lmsgen        ocssd              racgwrap.sbs
clsfmt              crs_relocate        evminfo.bin        extjoboO      loadpsp       ocssd.bin          rawutl
clsfmt.bin          crs_relocate.bin    evmlogger          genagtsh      loadpspO      oerr               sclsspawn
clsid               crs_setperm         evmlogger.bin      genclntsh     localconfig   oifcfg             srvctl
clsid.bin           crs_setperm.bin     evmmkbin           genclntst     lsdb          oifcfg.bin         unzip
cluutil             crs_start           evmmkbin.bin       genezi        lsnodes       olsadmintool       usrvip
cluvfy              crs_start.bin       evmmklib           gennfgt       lsnodes.bin   olsnodes           vipca
coraenv             crs_stat            evmmklib.bin       gennttab      lxchknlb      olsnodes.bin       xmlwf
coreData_r2.tar.gz  crs_stat.bin        evmpost            genorasdksh   lxegen        olsoidsync         zip
crsctl              crs_stop            evmpost.bin        gensyslib     lxinst        onsctl
crsctl.bin          crs_stop.bin        evmshow            gsd           oclsmon       oraenv
crsd                crstmpl.scr         evmshow.bin        gsdctl        oclsmon.bin   osdbagrp
crsData_r2.tar.gz   crs_unregister      evmsort            gsd.sh        ocrcheck      racgeut
crsd.bin            crs_unregister.bin  evmsort.bin        kgmgr         ocrcheck.bin  racgevtf
[root@r2 bin]# ./ocrdump -backupfile mybackupocr
PROT-302: Failed to initialize ocrdump
[root@r2 bin]#

 

 

 

OCRDUMP -BACKUPFILE Is Failing With PROT-302 [ID 782233.1]
		Modified 27-MAY-2009     Type PROBLEM     Status PUBLISHED

In this Document
  Symptoms
  Cause
  Solution
  References

---

 

 

Applies to:

Oracle Server - Enterprise Edition - Version: 10.2.0.1 to 10.2.0.4
This problem can occur on any platform.

Symptoms

The command : ocrdump -backupfile <filename> ; used to dump contents of a backup Oracle Cluster Registry (OCR) file will fail with error PROT-302: Failed to initialize ocrdump.

Eg.
$ORA_CRS_HOME/bin/ocrdump  -backupfile /scratch/oracle-10.2.0/crs/cdata/crs/day.ocr
PROT-302: Failed to initialize ocrdump

$ORA_CRS_HOME/log/<hostname>/client/ocrdump_<pid>.log shows:
-----------------------------------------------------------------------------------------------

Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005
Oracle. All rights reserved.
2005-12-08 08:46:03.836: [ OCRDUMP][3086874304]ocrdump starts...
2005-12-08 08:46:03.838: [ OCROSD][3086874304]utstoragetype:
/scratch/oracle-10.2.0/crs/cdata/crs/day.ocr is on FS type 61267. Not supported.
2005-12-08 08:46:03.838: [ OCROSD][3086874304]utopen:6'': OCR location
/scratch/oracle-10.2.0/crs/cdata/crs/day.ocr configured is not valid storage type. Return code [37].
2005-12-08 08:46:03.838: [ OCRRAW][3086874304]proprinit: Could not open raw device
2005-12-08 08:46:03.838: [ OCRAPI][3086874304]a_init:7!: Backend init unsuccessful : [37]
2005-12-08 08:46:03.838: [ OCRDUMP][3086874304]Failed to initailized OCR context. Error [PROC-37: Oracle Cluster Registry does not support the storage type configured] [37].
2005-12-08 08:46:03.838: [ OCRDUMP][3086874304]Failed to initialize ocrdump stage 2
2005-12-08 08:46:03.838: [ OCRDUMP][3086874304]Exiting [status=failed]...

Cause

The command "ocrdump -backupfile filename" fails to dump the content of the specified backup file if the backup file is not placed on an OCR-compatible device, which can be used to configure as an OCR device.

This issue was reported in Bug 4966320, Bug 7421563, Bug 5893432, Bug 5654475, Bug 7698962 fixed via internal unpublished Bug 4870817

Solution

This bug is known to have been fixed in latest CRS bundle patch for 10.2.0.4.  For more information, please consult Note 405820.1

Workaround :
---------------------

Move the backup file to a compatible deivce. A compatible device is the type of device that can be used to configure OCR. For example, the backup file can be placed on the same device where OCR device is configured.

References

BUG:4966320 - OCRDUMP -BACKUPFILE FAILED WITH PROT-302
BUG:5654475 - OCRDUMP -BACKUPFILE IS FAILING WITH PROT-302
BUG:5893432 - OCRDUMP -BACKUPFILE BACKUP.OCR FAILS WITH PROT-302: FAILED TO INITIALIZE OCRDUMP
BUG:7421563 - OCRDUMP -BACKUPFILE IS FAILING WITH PROT-302

Related Products Oracle Database Products > Oracle Database > Oracle Database > Oracle Server - Enterprise Edition Keywords OCR; RAW DEVICE Errors PROT-302

 

 

 

 

 

 

 

 

 

[root@h1 ~]# su - oracle
h1-> ls
a.txt  bak.html  Desktop  ocr.dmp
h1-> mv ocr.dmp  ocrdumpbak
h1-> ls
a.txt  bak.html  Desktop  ocrdumpbak
h1-> ocrdump -h
Name:
        ocrdump - Dump contents of Oracle Cluster Registry to a file.

Synopsis:
        ocrdump [<filename>|-stdout] [-backupfile <backupfilename>] [-keyname <keyname>] [-xml] [-noheader]

Description:
        Default filename is OCRDUMPFILE. Examples are:

        prompt> ocrdump
        writes cluster registry contents to OCRDUMPFILE in the current directory

        prompt> ocrdump MYFILE
        writes cluster registry contents to MYFILE in the current directory

        prompt> ocrdump -stdout -keyname SYSTEM
        writes the subtree of SYSTEM in the cluster registry to stdout

        prompt> ocrdump -stdout -xml
        writes cluster registry contents to stdout in xml format

Notes:
        The header information will be retrieved based on best effort basis.
        A log file will be created in
        $ORACLE_HOME/log/<hostname>/client/ocrdump_<pid>.log. Make sure
        you have file creation privileges in the above directory before
        running this tool.

h1-> ocrdump ocrdmpbackup
h1-> ls
a.txt  bak.html  Desktop  ocrdmpbackup  ocrdumpbak
h1-> ocrdump -backupfile ocrdmpbackup.bak
PROT-302: Failed to initialize ocrdump
h1-> ocrconfig -showbackup

h1     2010/07/13 22:13:12     /u01/app/oracle/product/10.2.0/crs_1/cdata/crs

h1     2010/07/12 22:24:00     /u01/app/oracle/product/10.2.0/crs_1/cdata/crs

h2     2010/07/09 02:10:40     /u01/app/oracle/product/10.2.0/crs_1/cdata/crs

h1     2010/07/12 22:24:00     /u01/app/oracle/product/10.2.0/crs_1/cdata/crs

h2     2010/07/09 02:10:40     /u01/app/oracle/product/10.2.0/crs_1/cdata/crs
h1-> cd /u01/app/oracle/product/10.2.0/crs_1/cdata/crs
h1-> ll
total 16816
-rw-r--r--  1 root root 4292608 Jul 13 22:13 backup00.ocr
-rw-r--r--  1 root root 4292608 Jul 12 22:24 backup01.ocr
-rw-r--r--  1 root root 4292608 Jul 13 22:13 day_.ocr
-rw-r--r--  1 root root 4292608 Jul 12 22:24 day.ocr
h1-> ocrdump -backupfile /u01/app/oracle/product/10.2.0/crs_1/cdata/crs/backup01.ocr
PROT-302: Failed to initialize ocrdump
h1-> ls
backup00.ocr  backup01.ocr  day_.ocr  day.ocr
h1-> cd
h1-> ls
a.txt  bak.html  Desktop  ocrdmpbackup  ocrdumpbak
h1-> ocrdump -backupfile thisdump
PROT-302: Failed to initialize ocrdump
h1-> ls
a.txt  bak.html  Desktop  ocrdmpbackup  ocrdumpbak
h1->