abaqus6.14 帮助 Abaqus Example Problems Guide翻译

• Abaqus Example Problems Guide

2.Dynamic Stress/Displacement Analyses

2.1动态应力分析

2.1.1 Nonlinear dynamic analysis of a structure with local inelastic collapse局部非弹性收缩结构的非线性动力分析

2.1.2 Detroit Edison pipe whip experiment底特律爱迪生管鞭实验

2.1.3 Rigid projectile impacting eroding plate刚性抛射物影响侵蚀板

2.1.5 Tennis racket and ball网球拍和球

2.1.6 Pressurized fuel tank with variable shell thickness可变壳体厚度的压力油箱

2.1.7 Modeling of an automobile suspension汽车悬架的建模

2.1.8 Explosive pipe closure爆炸管关闭

2.1.9 Knee bolster impact with general contact膝盖支撑与一般接触的冲击

2.1.10 Crimp forming with general contact与普通接触进行压接成型

2.1.11 Collapse of a stack of blocks with general contact与一般联系的一堆块的崩溃

2.1.12 Cask drop with foam impact limiter桶与泡沫冲击限制器下降

2.1.13 Oblique impact of a copper rod铜棒的倾斜冲击

2.1.14 Water sloshing in a baffled tank在挡板水箱中晃动水

2.1.15 Seismic analysis of a concrete gravity dam混凝土重力坝抗震分析

2.1.16 Progressive failure analysis of thin-wall aluminum extrusion under quasi-static and dynamic loads准静态和动态载荷下薄壁铝挤压的渐进失效分析

2.1.17 Impact analysis of a pawl-ratchet device棘轮棘轮装置的冲击分析

2.1.18 High-velocity impact of a ceramic target陶瓷靶的高速撞击

2.2 Mode-based dynamic analyses基于模态的动态分析

2.2.1 Analysis of a rotating fan using substructures and cyclic symmetry使用子结构和循环对称分析旋转风扇

2.2.2 Linear analysis of the Indian Point reactor feedwater line印度Point反应器给水管线的线性分析

2.2.3 Response spectra of a three-dimensional frame building三维框架建筑物的响应谱

2.2.4 Brake squeal analysis制动尖叫分析

2.2.5 Dynamic analysis of antenna structure utilizing residual modes利用残差模式的天线结构动态分析

2.2.6 Steady-state dynamic analysis of a vehicle body-in-white model车身白车模型的稳态动态分析

2.3 Eulerian analyses欧拉分析

2.3.1 Rivet forming铆钉成型

2.3.2 Impact of a water-filled bottle充满水的瓶子的影响

2.4 Co-simulation analyses协同仿真分析

2.4.1 Dynamic impact of a scooter with a bump具有凹凸的踏板车的动态影响