雷凌 Ralink RT2070 RT3070 RT2870系列芯片驱动移植到LPC3250Demo板的ifconfig ra0 up问题解决方案~~

平台：

Wifi模块：雷凌RT2070(芯片其实和3070一样，只是去掉了802.11n的功能)

Linux内核：Linux 2.6.27

UI:Android 1.5

MCU:NXP LPC3250

 

问题：

从官网上下载最新的Ralink3070的驱动，编译后，加载rt3070sta.k正常，ifconfig ra0 up时出现

 / # ifconfig ra0 up ifconfig: page allocation failure. order:6, mode:0x0 [<c002e12c>] (dump_stack+0x0/0x14) from [<c006f5f4>] (__alloc_pages_internal+0x3e8/0x400) [<c006f20c>] (__alloc_pages_internal+0x0/0x400) from [<c002f988>] (__dma_alloc+0x160/0x3b0) [<c002f828>] (__dma_alloc+0x0/0x3b0) from [<c002fc60>] (dma_alloc_coherent+0x58/0x64) [<c002fc08>] (dma_alloc_coherent+0x0/0x64) from [<c02002d0>] (hcd_buffer_alloc+0x9c/0xa4) r7:00000000 r6:c4861000 r5:c033559c r4:00000020 [<c0