LCD1602显示+ds18b20温度测试+ds1302时钟显示

/***********************************************************
功能：LCD1602显示+ds18b20温度测试+ds1302时钟显示
说明：适用于MINI板
时间：2012.12.19
作者：荆轩道
************************************************************/

DS1302.c

 

#include <REG52.H>
#include <intrins.h>
//#include "LCD1602.h"
//#include "DS1302.h"
#define uint unsigned int
#define uchar unsigned char
sbit  DS1302_CLK = P1^5;              //实时时钟时钟线引脚
sbit  DS1302_IO  = P1^4;              //实时时钟数据线引脚
sbit  DS1302_RST = P1^3;              //实时时钟复位线引脚

sbit  wireless_1 = P3^0;
sbit  wireless_2 = P3^1;
sbit  wireless_3 = P3^2;
sbit  wireless_4 = P3^3;

sbit  ACC0 = ACC^0;
sbit  ACC7 = ACC^7;

char hide_sec,hide_min,hide_hour,hide_day,hide_week,hide_month,hide_year;  //秒,分,时到日,月,年位闪的计数
sbit Set = P3^1;       //模式切换键
sbit Up = P3^2;        //加法按钮
sbit Down = P3^3;      //减法按钮
sbit out = P2^3;       //立刻跳出调整模式按钮

sbit DQ = P3^7;        //温度传送数据IO口
char done,count,temp,flag,up_flag,down_flag;
uchar temp_value;      //温度值
uchar TempBuffer[5],week_value[2];

void show_time();   //液晶显示程序
/***********1602液晶显示部分子程序****************/

//Port Definitions**********************************************************
sbit LcdRs  = P1^0;
sbit LcdRw  = P1^1;
sbit LcdEn   = P1^2;
sfr  DBPort  = 0x80;  //P0=0x80,P1=0x90,P2=0xA0,P3=0xB0.数据端口

//内部等待函数**************************************************************************
unsigned char LCD_Wait(void)
{
 LcdRs=0;
 LcdRw=1; _nop_();
 LcdEn=1; _nop_();
      
 LcdEn=0;
 return DBPort;  
}
//向LCD写入命令或数据************************************************************
#define LCD_COMMAND   0      // Command
#define LCD_DATA   1      // Data
#define LCD_CLEAR_SCREEN 0x01      // 清屏
#define LCD_HOMING    0x02      // 光标返回原点
void LCD_Write(bit style, unsigned char input)
{
 LcdEn=0;
 LcdRs=style;
 LcdRw=0;  _nop_();
 DBPort=input; _nop_();//注意顺序
 LcdEn=1;  _nop_();//注意顺序
 LcdEn=0;  _nop_();
 LCD_Wait(); 
}

//设置显示模式************************************************************
#define LCD_SHOW   0x04    //显示开
#define LCD_HIDE   0x00    //显示关  

#define LCD_CURSOR   0x02  //显示光标
#define LCD_NO_CURSOR  0x00    //无光标      

#define LCD_FLASH   0x01    //光标闪动
#define LCD_NO_FLASH  0x00    //光标不闪动

void LCD_SetDisplay(unsigned char DisplayMode)
{
 LCD_Write(LCD_COMMAND, 0x08|DisplayMode); 
}

//设置输入模式************************************************************
#define LCD_AC_UP   0x02
#define LCD_AC_DOWN   0x00      // default

#define LCD_MOVE   0x01      // 画面可平移
#define LCD_NO_MOVE   0x00      //default

void LCD_SetInput(unsigned char InputMode)
{
 LCD_Write(LCD_COMMAND, 0x04|InputMode);
}

//初始化LCD************************************************************
void LCD_Initial()
{
 LcdEn=0;
 LCD_Write(LCD_COMMAND,0x38);           //8位数据端口,2行显示,5*7点阵
 LCD_Write(LCD_COMMAND,0x38);
 LCD_SetDisplay(LCD_SHOW|LCD_NO_CURSOR);    //开启显示, 无光标
 LCD_Write(LCD_COMMAND,LCD_CLEAR_SCREEN);   //清屏
 LCD_SetInput(LCD_AC_UP|LCD_NO_MOVE);       //AC递增, 画面不动
}

//液晶字符输入的位置************************
void GotoXY(unsigned char x, unsigned char y)
{
 if(y==0)
  LCD_Write(LCD_COMMAND,0x80|x);
 if(y==1)
  LCD_Write(LCD_COMMAND,0x80|(x-0x40));
}

//将字符输出到液晶显示
void Print(unsigned char *str)
{
 while(*str!='\0')
 {
  LCD_Write(LCD_DATA,*str);
  str++;
 }
}

 

 

/***********DS1302时钟部分子程序******************/
typedef struct __SYSTEMTIME__
{
 unsigned char Second;
 unsigned char Minute;
 unsigned char Hour;
 unsigned char Week;
 unsigned char Day;
 unsigned char Month;
 unsigned char  Year;
 unsigned char DateString[11];
 unsigned char TimeString[9];
}SYSTEMTIME; //定义的时间类型
SYSTEMTIME CurrentTime;

#define AM(X) X
#define PM(X) (X+12)               // 转成24小时制
#define DS1302_SECOND 0x80          //时钟芯片的寄存器位置,存放时间
#define DS1302_MINUTE 0x82
#define DS1302_HOUR  0x84
#define DS1302_WEEK  0x8A
#define DS1302_DAY  0x86
#define DS1302_MONTH 0x88
#define DS1302_YEAR  0x8C

void DS1302InputByte(unsigned char d)  //实时时钟写入一字节(内部函数)
{
    unsigned char i;
    ACC = d;
    for(i=8; i>0; i--)
    {
        DS1302_IO = ACC0;            //相当于汇编中的 RRC
        DS1302_CLK = 1;
        DS1302_CLK = 0;
        ACC = ACC >> 1;
    }
}

unsigned char DS1302OutputByte(void)  //实时时钟读取一字节(内部函数)
{
    unsigned char i;
    for(i=8; i>0; i--)
    {
        ACC = ACC >>1;            //相当于汇编中的 RRC
        ACC7 = DS1302_IO;
        DS1302_CLK = 1;
        DS1302_CLK = 0;
    }
    return(ACC);
}

void Write1302(unsigned char ucAddr, unsigned char ucDa) //ucAddr: DS1302地址, ucData: 要写的数据
{
    DS1302_RST = 0;
    DS1302_CLK = 0;
    DS1302_RST = 1;
    DS1302InputByte(ucAddr);        // 地址，命令
    DS1302InputByte(ucDa);        // 写1Byte数据
    DS1302_CLK = 1;
    DS1302_RST = 0;
}

unsigned char Read1302(unsigned char ucAddr) //读取DS1302某地址的数据
{
    unsigned char ucData;
    DS1302_RST = 0;
    DS1302_CLK = 0;
    DS1302_RST = 1;
    DS1302InputByte(ucAddr|0x01);        // 地址，命令
    ucData = DS1302OutputByte();         // 读1Byte数据
    DS1302_CLK = 1;
    DS1302_RST = 0;
    return(ucData);
}

 

void DS1302_GetTime(SYSTEMTIME *Time)  //获取时钟芯片的时钟数据到自定义的结构型数组
{
 unsigned char ReadValue;
 ReadValue = Read1302(DS1302_SECOND);
 Time->Second = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
 ReadValue = Read1302(DS1302_MINUTE);
 Time->Minute = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
 ReadValue = Read1302(DS1302_HOUR);
 Time->Hour = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
 ReadValue = Read1302(DS1302_DAY);
 Time->Day = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F); 
 ReadValue = Read1302(DS1302_WEEK);
 Time->Week = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
 ReadValue = Read1302(DS1302_MONTH);
 Time->Month = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
 ReadValue = Read1302(DS1302_YEAR);
 Time->Year = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F); 
}

void DateToStr(SYSTEMTIME *Time)    //将时间年,月,日,星期数据转换成液晶显示字符串,放到数组里DateString[]
{   if(hide_year<2)                 //这里的if,else语句都是判断位闪烁,<2显示数据,>2就不显示,输出字符串为 2007/07/22
    {                              
   Time->DateString[0] = '2';