华为eNSP路由单区域，多区域步骤对比

最新推荐文章于 2023-08-02 22:14:45 发布

tanwenlong01

最新推荐文章于 2023-08-02 22:14:45 发布

阅读量1.1k

点赞数 1

本文链接：https://blog.csdn.net/boyuser/article/details/107544477

版权

AR2
undo terminal monitor
Info: Current terminal monitor is off.
sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys R2
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 12.1.1.2 24
[R2-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[R2-GigabitEthernet0/0/0]int g0/0/1
[R2-GigabitEthernet0/0/1]ip add 20.1.1.1 24
[R2-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[R2-GigabitEthernet0/0/1]quit
[R2]int loop 0
[R2-LoopBack0]ip add 2.2.2.2 32
[R2-LoopBack0]quit
[R2]ospf 1 router-id 2.2.2.2
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
[R2-ospf-1-area-0.0.0.0]network 12.1.1.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]network 20.1.1.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]quit
[R2-ospf-1]return

AR4
undo terminal monitor
Info: Current terminal monitor is off.
sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys R4
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ip add 20.1.1.3 24
[R4-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[R4-GigabitEthernet0/0/0]int g0/0/1
[R4-GigabitEthernet0/0/1]ip add 45.1.1.1 24
[R4-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[R4-GigabitEthernet0/0/1]quit
[R4]int loop 0
[R4-LoopBack0]ip add 4.4.4.4 32
[R4]ospf 1 router-id 4.4.4.4
[R4-ospf-1]area 0
[R4-ospf-1-area-0.0.0.0]network 4.4.4.4 0.0.0.0
[R4-ospf-1-area-0.0.0.0]network 20.1.1.0 0.0.0.255
[R4-ospf-1-area-0.0.0.0]network 45.1.1.0 0.0.0.255
[R4-ospf-1-area-0.0.0.0]return

AR5
undo terminal monitor
Info: Current terminal monitor is off.
sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys R5
[R5]user-interface console 0
[R5-ui-console0]idle-timeout 0 0
[R5-ui-console0]quit
[R5]int g0/0/0
[R5-GigabitEthernet0/0/0]ip add 45.1.1.2 24
[R5-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[R5-GigabitEthernet0/0/0]int loop 0
[R5-LoopBack0]ip add 5.5.5.5 32
[R5-LoopBack0]quit
[R5]ospf 1 router-id 5.5.5.5
[R5-ospf-1]area 0
[R5-ospf-1-area-0.0.0.0]network 5.5.5.5 0.0.0.0
[R5-ospf-1-area-0.0.0.0]network 45.1.1.0 0.0.0.255
[R5-ospf-1-area-0.0.0.0]return

在这里插入图片描述
AR1
undo terminal monitor
Info: Current terminal monitor is off.
sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys R1
[R1]user-interface console 0
[R1-ui-console0]idle-timeout 0 0
[R1-ui-console0]quit
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 10.1.1.1 24
[R1-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[R1-GigabitEthernet0/0/0]int loop 0
[R1-LoopBack0]ip add 1.1.1.1 32
[R1-LoopBack0]quit
[R1]router id 1.1.1.1
Info: Router ID has been modified, please reset the relative protocols manually
to update the Router ID.
[R1]ospf
[R1-ospf-1]area 1
[R1-ospf-1-area-0.0.0.1]network 1.1.1.1 0.0.0.0
[R1-ospf-1-area-0.0.0.1]network 10.1.1.0 0.0.0.255
[R1-ospf-1-area-0.0.0.1]return
AR2
undo terminal monitor
Info: Current terminal monitor is off.
sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys R2
[R2]user-interface console 0
[R2-ui-console0]idle-timeout 0 0
[R2-ui-console0]quit
[R2]int 10.1.1.2 24
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 10.1.1.2 24
[R2-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[R2-GigabitEthernet0/0/0]int g0/0/1
[R2-GigabitEthernet0/0/1]ip add 10.1.2.1 24
[R2-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[R2-GigabitEthernet0/0/1]int loop 0
[R2-LoopBack0]ip add 2.2.2.2 32
[R2-LoopBack0]quit
[R2]router id 2.2.2.2
Info: Router ID has been modified, please reset the relative protocols manually
to update the Router ID.
[R2]ospf
[R2-ospf-1]area 1
[R2-ospf-1-area-0.0.0.1]network 10.1.1.0 0.0.0.255
[R2-ospf-1-area-0.0.0.1]area 0
[R2-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
[R2-ospf-1-area-0.0.0.0]network 10.1.2.0 0.0.0.255

AR3
undo terminal monitor
Info: Current terminal monitor is off.
sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys R3
[R3]user-interface console 0
[R3-ui-console0]idle-timeout 0 0
[R3-ui-console0]quit
[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 10.1.2.2 24
[R3-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[R3-GigabitEthernet0/0/0]int loop 0
[R3-LoopBack0]ip add 3.3.3.3 32
[R3-LoopBack0]int g0/0/1
[R3-GigabitEthernet0/0/1]ip add 10.1.3.1 24
[R3-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[R3-GigabitEthernet0/0/1]quit
[R3]router id 2.2.2.2
Info: Router ID has been modified, please reset the relative protocols manually
to update the Router ID.
[R3]ospf
[R3-ospf-1]area 0
[R3-ospf-1-area-0.0.0.0]network 10.1.2.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]network 3.3.3.3 0.0.0.0
[R3-ospf-1-area-0.0.0.0]area 2
[R3-ospf-1-area-0.0.0.2]network 10.1.3.0 0.0.0.255

AR4
undo terminal monitor
Info: Current terminal monitor is off.
sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys R4
[R4]user-interface console 0
[R4-ui-console0]idle-timeout 0 0
[R4-ui-console0]quit
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ip add 10.1.3.2 24
[R4-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[R4-GigabitEthernet0/0/0]int loop 0
[R4-LoopBack0]ip add 4.4.4.4 32
[R4-LoopBack0]quit
[R4]router id 4.4.4.4
Info: Router ID has been modified, please reset the relative protocols manually
to update the Router ID.
[R4]ospf
[R4-ospf-1]area 2
[R4-ospf-1-area-0.0.0.2]network 10.1.3.0 0.0.0.255
[R4-ospf-1-area-0.0.0.2]network 4.4.4.4 0.0.0.0

tanwenlong01

关注

1
点赞
踩
1

收藏

觉得还不错? 一键收藏
0
评论
华为eNSP路由单区域，多区域步骤对比

AR1undo terminal monitorInfo: Current terminal monitor is off.sysEnter system view, return user view with Ctrl+Z.[Huawei]sys R1[R1]user-interface console 0[R1-ui-console0]idle-timeout 0 0[R1-ui-console0]quit[R1]int g0/0/0[R1-GigabitEthernet0/0/0.
复制链接

扫一扫