树莓派2B使用360随身WiFi2代连接WiFi

首先感谢：

http://www.cnblogs.com/sjqlwy/p/4415935.html

https://github.com/notro/rpi-source/wiki

下面是些操作记录，很简略，抱歉

更新

sudo apt-get update

sudo apt-get upgrade

sudo apt-get dist-upgrade

sudo rpi-update

获取脚本

sudo wgethttps://raw.githubusercontent.com/notro/rpi-source/master/rpi-source -O/usr/bin/rpi-source

sudo chmod +x /usr/bin/rpi-source

/usr/bin/rpi-source -q --tag-update

获取gcc-4.8.4

sudo nano/etc/apt/sources.list.d/jessie.list

http://mirrordirector.raspbian.org/raspbian/jessie main contrib non-free rpi

sudo apt-get update

sudo apt-get install -y gcc-4.8 g++-4.8

<yes>

rpi-source

获取官方驱动http://www.mediatek.com/en/downloads1/downloads/mt7601u-usb/

传输DPO_MT7601U_LinuxSTA_3.0.0.4_20130913.tar.bz2

tar -jxvfDPO_MT7601U_LinuxSTA_3.0.0.4_20130913.tar.bz2

cd DPO_MT7601U_LinuxSTA_3.0.0.4_20130913/

修改common/rtusb_dev_id.c，在 {USB_DEVICE(0x148f,0×7601)}, /* MT 6370 */  下面加入以下内容：

{USB_DEVICE(0x148f,0x760b)}, /* 360 Wifi */

打开 include/os/rt_linux.h，找到

int fsuid;

int fsgid;

并把它改为

kuid_t fsuid;

kgid_t fsgid;

编译

make

sudo make install

sudo modprobe mt7601Usta

试验

ifconfig

sudo iwlist ra0 scan

配置连接

sudo nano /etc/network/interfaces

添加

auto ra0

allow-hotplug ra0

iface ra0 inet dhcp

wpa-conf/etc/wpa_supplicant/wpa_supplicant.conf

iface default inet dhcp

sudo nano/etc/wpa_supplicant/wpa_supplicant.conf

添加

ctrl_interface=DIR=/var/run/wpa_supplicantGROUP=netdev

update_config=1

 

network={

       ssid="WiFi名词"

       key_mgmt=NONE

       group=CCMP

       priority=100

}

重启即可

之后出现bug，不用WiFi的时候，每次需要sudo dhclient eth0，才能用网线连上网