定义
1.type cursorType is ref cursor;
2.procedure getApolloPortolioAllPortfolios(
p_portfolios out sys_refcursor
);
http://orajc.blog.51cto.com/458434/105931
游标是数据库中一个命名的工作区,当游标被声明后,他就与一个固定的SQL想关联,在编译时刻是已知的,是静态的.它永远指向一个相同的查询工作区.
游标变量可以在运行时刻与不同的SQL语句关联,在运行时可以取不同的SQL语句.它可以引用不同的工作区.
游标和游标变量是不能相互代替的.
TYPE ref_type_name IS REF CURSOR [RETURN return_type];
声明游标变量
cursor_name ref_type_name;
TYPE ref_type_name IS REF CURSOR RETURN employee%TYPE
%TYPE一个列类型
%ROWTYPE行类型
OPEN-FOR(打开游标变量,与多行查询连接起来) FETCH(从结果集中取行数据),close(关闭游标变量)
declare
cursor emp_cur ( p_deptid in number) is
select * from employees where department_id = p_deptid;
open emp_cur(30);
loop
fetch emp_cur into l_emp;
exit when emp_cur%notfound;
dbms_output.put_line('Employee id '|| l_emp.employee_id || ' is ');
dbms_output.put_line(l_emp.first_name || ' ' || l_emp.last_name);
end loop;
close emp_cur;
2.for rec_ptrs in (select * from pvtrs order by pvtrsid asc)
loop
dbms_output.put_line('pvtrsid:'||rec_ptrs.pvtrsid);
--feedOasys
begin
select count(*) into vcount from REPORTS_PORTFOLIOS_MAPPING where REPORTID=1 and PVTRSID=rec_ptrs.pvtrsid;
if (vcount > 0) then
vfeedOasys := 'Y';
else
vfeedOasys := 'N';
end if;
if (vfeedOasys = 'Y') then
--feed config
vMTM := 'N';
vIA := 'N';
vnotionalComitment := 'N';
begin
select MTMFEED,IAFEED,NCFEED into feedRec from OASYS_FEEDS_PORTFOLIOS_CONFIG where PVTRSID=rec_ptrs.pvtrsid;
if (feedRec.MTMFEED = 'Y') then
vMTM := 'Y';
end if;
if (feedRec.IAFEED = 'Y') then
vIA := 'Y';
end if;
if (feedRec.NCFEED = 'Y') then
vnotionalComitment := 'Y';
end if;
exception
when NO_DATA_FOUND then
vMTM := 'N';
vIA := 'N';
vnotionalComitment := 'N';
end;
dbms_output.put_line('vMTM,vIA,vnotionalComitment:'||vMTM||','||vIA||','||vnotionalComitment);
else
vMTM := 'N';
vIA := 'N';
vnotionalComitment := 'N';
end if;
exception
when NO_DATA_FOUND then
vfeedOasys := 'N';
end;
dbms_output.put_line('vfeedOasys:'||vfeedOasys);
end loop;
3. open p_data for
select ASOFDATE, ISSUERNAME, NOTIONALAMOUNTPCCY, WAGCURRENTPRICE,
WAGCURRENTPRICE - nvl(findIssuerDatePrice(dayBefore, ISSUERNAME),nvl(findIssuerDatePrice(dayBeforeminusone, ISSUERNAME), nvl(findIssuerDatePrice(dayBeforeminustwo, ISSUERNAME), findIssuerDatePrice(dayBeforeminusthree, ISSUERNAME)))) DailyChange,
WAGCURRENTPRICE - nvl(findIssuerDatePrice(weekBefore, ISSUERNAME),nvl(findIssuerDatePrice(weekBeforeminusone, ISSUERNAME), nvl(findIssuerDatePrice(weekBeforeminustwo, ISSUERNAME),findIssuerDatePrice(weekBeforeminusthree, ISSUERNAME)))) WeeklyChange,
WAGCURRENTPRICE - nvl(findIssuerDatePrice(monthBefore, ISSUERNAME),nvl(findIssuerDatePrice(monthBeforeminusone, ISSUERNAME), nvl(findIssuerDatePrice(monthBeforeminustwo, ISSUERNAME), findIssuerDatePrice(monthBeforeminusthree, ISSUERNAME)))) MonthlyChange
from (
select ASOFDATE, ISSUERNAME, NOTIONALAMOUNTPCCY, WAGCURRENTPRICE
from Rpt_IssuerNotionalPriceHIST
where ASOFDATE = closeDate
order by NOTIONALAMOUNTPCCY desc, ISSUERNAME
)
where ROWNUM <= 10;
Oracle Cursors语法总结
关于Oracle Cursors的语法总结,Oracle Cursors是用来查询数据库,获取记录集合(结果集)的指针,可以让开发者一次访问一行结果集,在每条结果集上作操作。
一.Oracle的Cursors概念:
游标:用来查询数据库,获取记录集合(结果集)的指针,可以让开发者一次访问一行结果集,在每条结果集上作操作。
二.Oracle的Cursors分类:
1.静态游标:
分为显式游标和隐式游标。
2.REF游标:
是一种引用类型,类似于指针。
三.Oracle的Cursors详细内容:
1.显式游标:
CURSOR游标名(参数) [返回值类型] IS
Select语句
生命周期:
a.打开游标(OPEN)
解析,绑定。。。不会从数据库检索数据
b.从游标中获取记录(FETCH INTO)
执行查询,返回结果集。通常定义局域变量作为从游标获取数据的缓冲区。
c.关闭游标(CLOSE)
完成游标处理,用户不能从游标中获取行。还可以重新打开。
选项:参数和返回类型
set serveroutput on
declare
cursor emp_cur ( p_deptid in number) is
select * from employees where department_id = p_deptid;
l_emp employees%rowtype;
begin
dbms_output.put_line('Getting employees from department 30');
open emp_cur(30);
loop
fetch emp_cur into l_emp;
exit when emp_cur%notfound;
dbms_output.put_line('Employee id '|| l_emp.employee_id || ' is ');
dbms_output.put_line(l_emp.first_name || ' ' || l_emp.last_name);
end loop;
close emp_cur;
dbms_output.put_line('Getting employees from department 90');
open emp_cur(90);
loop
fetch emp_cur into l_emp;
exit when emp_cur%notfound;
dbms_output.put_line('Employee id '|| l_emp.employee_id || ' is ');
dbms_output.put_line(l_emp.first_name || ' ' || l_emp.last_name);
end loop;
close emp_cur;
end;
/
2.隐式游标:
不用明确建立游标变量,分两种:
a.在PL/SQL中使用DML语言,使用ORACLE提供的名为SQL的隐示游标
b.CURSOR FOR LOOP,用于for loop语句
a.举例:
declare
begin
update departments set department_name=department_name;
--where 1=2;
dbms_output.put_line('update '|| sql%rowcount ||' records');
end;
/
b.举例:
declare
begin
for my_dept_rec in ( select department_name, department_id from departments)
loop
dbms_output.put_line(my_dept_rec.department_id || ' : ' || my_dept_rec.department_name);
end loop;
end;
/
c.举例:
单独select
declare
l_empno emp.EMPLOYEE_ID%type;
-- l_ename emp.ename%type;
begin
select EMPLOYEE_ID
into l_empno
from emp;
--where rownum =1;
dbms_output.put_line(l_empno);
end;
/
使用INTO获取值,只能返回一行。
游标属性:
%FOUND:变量最后从游标中获取记录的时候,在结果集中找到了记录。
%NOTFOUND:变量最后从游标中获取记录的时候,在结果集中没有找到记录。
%ROWCOUNT:当前时刻已经从游标中获取的记录数量。
%ISOPEN:是否打开。
Declare
Cursor emps is
Select * from employees where rownum<6 order by 1;
Emp employees%rowtype;
Row number :=1;
Begin
Open emps;
Fetch emps into emp;
Loop
If emps%found then
Dbms_output.put_line('Looping over record '||row|| ' of ' || emps%rowcount);
Fetch emps into emp;
Row := row + 1;
Elsif emps%notfound then
Exit; ---exit loop, not IF
End if;
End loop;
If emps%isopen then
Close emps;
End if;
End;
/
显式和隐式游标的区别:
尽量使用隐式游标,避免编写附加的游标控制代码(声明,打开,获取,关闭),也不需要声明变量来保存从游标中获取的数据。
3.REF CURSOR游标:
动态游标,在运行的时候才能确定游标使用的查询。分类:
1.强类型(限制)REF CURSOR,规定返回类型
2.弱类型(非限制)REF CURSOR,不规定返回类型,可以获取任何结果集。
TYPE ref_cursor_name IS REF CURSOR [RETURN return_type]
Declare
Type refcur_t is ref cursor;
Type emp_refcur_t is ref cursor return employee%rowtype;
Begin
Null;
End;
/
强类型举例:
declare
--声明记录类型
type emp_job_rec is record(
employee_id number,
employee_name varchar2(50),
job_title varchar2(30)
);
--声明REF CURSOR,返回值为该记录类型
type emp_job_refcur_type is ref cursor
return emp_job_rec;
--定义REF CURSOR游标的变量
emp_refcur emp_job_refcur_type;
emp_job emp_job_rec;
begin
open emp_refcur for
select e.employee_id,
e.first_name || ' ' ||e.last_name "employee_name",
j.job_title
from employees e, jobs j
where e.job_id = j.job_id and rownum < 11 order by 1;
fetch emp_refcur into emp_job;
while emp_refcur%found loop
dbms_output.put_line(emp_job.employee_name || '''s job is ');
dbms_output.put_line(emp_job.job_title);
fetch emp_refcur into emp_job;
end loop;
end;
/
本篇文章来源于 PHP资讯 原文链接:http://www.phpq.net/oracle/oracle-cursors-syntax.html
=================
属性
http://www.cnblogs.com/zndavid/archive/2009/06/09/1499601.html
SQL%FOUND和SQL%NOTFOUND
在执行任何DML语句前SQL%FOUND和SQL%NOTFOUND的值都是NULL,在执行DML语句后,SQL%FOUND的属性值将是:
. TRUE :INSERT
. TRUE :DELETE和UPDATE,至少有一行被DELETE或UPDATE.
. TRUE :SELECT INTO至少返回一行
当SQL%FOUND为TRUE时,SQL%NOTFOUND为FALSE。
SQL%ROWCOUNT
在执行任何DML语句之前,SQL%ROWCOUNT的值都是NULL,对于SELECT INTO语句,如果执行成功,SQL%ROWCOUNT的值为1,如果没有成功,SQL%ROWCOUNT的值为0,同时产生一个异常NO_DATA_FOUND.
SQL%ISOPEN
SQL%ISOPEN是一个布尔值,如果游标打开,则为TRUE, 如果游标关闭,则为FALSE.对于隐式游标而言SQL%ISOPEN总是FALSE,这是因为隐式游标在DML语句执行时打开,结束时就立即关闭。