stm32编程配置一个I/O为EXTI中断的步骤

最新推荐文章于 2022-06-18 23:53:24 发布

ccsu_ms

最新推荐文章于 2022-06-18 23:53:24 发布

阅读量1.5k

点赞数

分类专栏：综合项目开发

本文链接：https://blog.csdn.net/ccsu_mz/article/details/9197835

版权

综合项目开发专栏收录该内容

7 篇文章 0 订阅

订阅专栏

配置一个I/O为EXTI中断的步骤：
        GPIO_InitTypeDef GPIO_InitStructure;
	EXTI_InitTypeDef EXTI_InitStructure;
	NVIC_InitTypeDef NVIC_InitStructure;
	//1.使能EXTIx线的时钟和第二功能AFIO时钟
    RCC_APB2PeriphClockCmd( RCC_APB2Periph_AFIO | RCC_APB2Periph_GPIOA,ENABLE);

//	NVIC_CONFIG();
	//2.配置EXTIx线的中断优先级
	NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
	
	NVIC_InitStructure.NVIC_IRQChannel = EXTI3_IRQn;
	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
	NVIC_Init(&NVIC_InitStructure);
   //3.配置EXTIx中断线的I/O口
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD;
	GPIO_Init(GPIOA,&GPIO_InitStructure);
	
	GPIO_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource3);//4.选定要配置为EXTI的I/O口线
   //5.EXTIx中断线的工作模式的配置
	EXTI_InitStructure.EXTI_Line = EXTI_Line3;
	EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
	EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;
	EXTI_InitStructure.EXTI_LineCmd = ENABLE;
	
	EXTI_Init(&EXTI_InitStructure);