经典rac和存储的系统构架拓扑图
本工程的系统构架,由于IP地址均采用192.168开头,下面系统拓扑图省略了192.168,eth0,eth1,eth2……代表设备上的网卡名称,由于VMware没有光纤交换机的虚拟,我才用了直连模式,同样可以实现存储阵列的多路径选择。
RAC规划环境
需要搭建3台主机,centos linux为rac1和rac2,加上1台主机作为共享存储(采用Openfiler)
节点/主机名 | IP address | interface name | 地址类型 | 设备中的网卡 | 虚拟软件的网卡 |
rac1 | 192.168.5.111 | rac1 | 公共IP (public)对外服务网 | eth0 | vmnet8(nat模式) |
rac1 | 192.168.5.113 | rac1-vip | 虚拟IP (virtual) | eth0 | vmnet8(nat模式) |
rac1 | 192.168.2.1 | rac1-priv | 私有IP (private)心跳网 | eth1 | vmnet1(host only) |
rac1 | 192.168.3.11 | rac1-disk1 | 存储连接IP 1 存储网1 | eth2 | vmnet1(host only) |
rac1 | 192.168.3.33 | rac1-disk2 | 存储连接IP 2 存储网2 | eth3 | vmnet1(host only) |
rac2 | 192.168.5.112 | rac2 | 公共IP (public)对外服务网 | eth0 | vmnet8(nat模式) |
rac2 | 192.168.5.114 | rac2-vip | 虚拟IP (virtual) | eth0 | vmnet8(nat模式) |
rac2 | 192.168.2.2 | rac2-priv | 私有IP (private)心跳网 | eth1 | vmnet1(host only) |
rac2 | 192.168.3.22 | rac2-disk1 | 存储连接IP 1 存储网1 | eth2 | vmnet1(host only) |
rac2 | 192.168.3.44 | rac2-disk2 | 存储连接IP 2 存储网2 | eth3 | vmnet1(host only) |
共享存储(Openfiler) | 192.168.5.115 | 公共IP (public)对外服务网 | eth0 | vmnet8(nat模式) | |
共享存储(Openfiler) | 192.168.3.55 | share1 | 存储连接IP 1 存储网1 | eth1 | vmnet1(host only) |
共享存储(Openfiler) | 192.168.3.66 | share2 | 存储连接IP 2 存储网2 | eth2 | vmnet1(host only) |
scan | 192.168.5.222 | scan-ip | 真正对外服务IP地址 |
|
hosts文件
这是将要存放到主机上的文件,路径是/etc/hosts。
192.168.5.111 rac1 |
此部分是整个工程的重要资料,我们就是按照这个规划来实现的,在项目管理中,再加一点语言描述,就叫做实施方案。