linux驱动开发：重力传感器的了解

最新推荐文章于 2024-10-09 21:11:30 发布

changliang7731

最新推荐文章于 2024-10-09 21:11:30 发布

阅读量1.5k

点赞数 1

分类专栏： linux编程内核学习文章标签： linux驱动开发传感器驱动开发

本文链接：https://blog.csdn.net/changliang7731/article/details/53149823

版权

板子上有一颗IC：MMA7660FC，我们来试着读一下它的芯片手册，当然读的目的是为了驱动它。这也是我们驱动开发的目的：拿过来一块未知的IC，去读它的芯片手册，支持那种通讯协议，然后编码让它动起来。

he sensor has three power modes: Off Mode, Standby Mode, and Active Mode to offer the customer different power
consumption options. The sensor is only capable of running in one of these modes at a time.
支持三种模式：off mode，standby mode，active mode.

During the Active Mode, continuous measurement on all three axes is enabled. In addition, the user can choose to enable:Shake Detection, Tap Detection, Orientation Detection, and/or Auto-Wake/Sleep Feature and in this mode the digital analysis for any of these functions is done. The user can configure the samples per second to any of the following: 1 sample/second,2 samples/second, 4 samples/second, 8 samples/second, 16 samples/second, 32 samples/second, 64 samples/