富芮坤FR801XH作为主机连接SYD8811

SYD8811使用开发板,代码使用的是透传例程:Source Code\SYD8811_ble_peripheral\1.SYD8811_BLE_UART_notifyen_open_power

FR801XH芯片丝印如下:

两块板子实物路如下:

FR801XH上位机软件<FreqChip_Download.exe>以及烧录步骤如下:

这里使用的工程为:FR801xH-SDK-master\examples\dev1.0\ble_multi_role\kei

简单按照如下步骤修改主机的代码:

1.在void app_gap_evt_cb(gap_event_t *p_event)函数中修改扫描结构中判断设备的逻辑:

case GAP_EVT_ADV_REPORT:

        {

            uint8_t scan_name[] = "SYD_UART";

// co_printf("data:%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\r\n",p_event->param.adv_rpt->data[0],p_event->param.adv_rpt->data[1],p_event->param.adv_rpt->data[19],\

//           p_event->param.adv_rpt->data[20],p_event->param.adv_rpt->data[21],p_event->param.adv_rpt->data[22],p_event->param.adv_rpt->data[23],p_event->param.adv_rpt->data[24],\

//           p_event->param.adv_rpt->data[25],p_event->param.adv_rpt->data[26]);

            //if(memcmp(event->param.adv_rpt->src_addr.addr.addr,"\x0C\x0C\x0C\x0C\x0C\x0B",6)==0)

//            if (p_event->param.adv_rpt->data[0] == 0x05

//                && p_event->param.adv_rpt->data[1] == GAP_ADVTYPE_LOCAL_NAME_COMPLETE

//                && memcmp(&(p_event->param.adv_rpt->data[2]), scan_name, 0x12) == 0)

if (p_event->param.adv_rpt->data[0] == 0x02

                && p_event->param.adv_rpt->data[1] == GAP_ADTVYPE_FLAGS

                && memcmp(&(p_event->param.adv_rpt->data[19]), scan_name, 0x08) == 0)

            {

                gap_stop_scan();



                co_printf("evt_type:0x%02x,rssi:%d\r\n",p_event->param.adv_rpt->evt_type,p_event->param.adv_rpt->rssi);

                co_printf("content:");

                show_reg(p_event->param.adv_rpt->data,p_event->param.adv_rpt->length,1);



                gap_start_conn(&(p_event->param.adv_rpt->src_addr.addr),

                                p_event->param.adv_rpt->src_addr.addr_type,

                                12, 12, 0, 300);

            }

        }

        break;

2.在void app_gap_evt_cb(gap_event_t *p_event)函数中修改连接上设备好查找的服务:

        case GAP_EVT_MASTER_CONNECT:

        {

            co_printf("master[%d],connect. link_num:%d\r\n",p_event->param.master_connect.conidx,gap_get_connect_num());

            //master_link_conidx = (p_event->param.master_connect.conidx);

#if 0

            if (gap_security_get_bond_status())

                gap_security_enc_req(p_event->param.master_connect.conidx);

            else

                gap_security_pairing_req(p_event->param.master_connect.conidx);

#else

//            extern uint8_t client_id;

//            gatt_discovery_all_peer_svc(client_id,p_event->param.master_encrypt_conidx);

uint8_t group_uuid[]={0x01,0x00};

gatt_discovery_peer_svc(client_id,p_event->param.master_encrypt_conidx,2,group_uuid);

#endif

            mr_central_start_scan();

        }

        break;

3.static uint16_t mr_central_msg_handler(gatt_msg_t *p_msg)函数中查找到服务后使能notify等操作:

        case GAP_EVT_MASTER_CONNECT:

        {

            co_printf("master[%d],connect. link_num:%d\r\n",p_event->param.master_connect.conidx,gap_get_connect_num());

            //master_link_conidx = (p_event->param.master_connect.conidx);

#if 0

            if (gap_security_get_bond_status())

                gap_security_enc_req(p_event->param.master_connect.conidx);

            else

                gap_security_pairing_req(p_event->param.master_connect.conidx);

#else

//            extern uint8_t client_id;

//            gatt_discovery_all_peer_svc(client_id,p_event->param.master_encrypt_conidx);

uint8_t group_uuid[]={0x01,0x00};

gatt_discovery_peer_svc(client_id,p_event->param.master_encrypt_conidx,2,group_uuid);

#endif

            mr_central_start_scan();

        }

        break;

到此代码修改结束!

主从都下载好后双方的打印如下:

可以看到能够正确连接SYD8811,但是notify使能失败!

抓包后发现是因为FR801XH的芯片的ATT命令和手机的有点差别,造成和SYD8811不兼容!

目前先到这里,以后有需要再分析!

本文对应的资料包为"FR801XH连接SYD8811资料合集20220511 144402.7z",如果有需要,请和博主联系!